(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Plate Heaters - Ceramic, Small Size
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
•Application: For Metal and Mold Heating
•Usage Pattern: Individual Item
•Category Single Body: Ceramic Heater
•Heating Area Material: Ceramics
•Heat Generating Body Type: Tungsten
- inCAD Components
Part Number
Configured Part Number is shown.
MMCPH-20-10
・Materials
[ M ] Material:
Heater: Ceramics
Insulation Tube: Fluorine Resin Tube
(Heat Resistant Temperature: 260°C)
[ M ] Material:
Heater: Ceramics
Insulation Tube: Fluorine Resin Tube
(Heat Resistant Temperature: 260°C)
Specifications
| Part Number | - | A | - | B |
| MMCPH | - | 15 | - | 10 |
| Part Number | A | B | V (Voltage) | W (Electric Power) | Maximum Operating Temperature (°C) |
| Type | |||||
| MMCPH | 15 | 10 | 15~45 | 6~21 | 200 |
| 15 | 10~40 | 5~19 | |||
| 20 | 10 | 15~80 | 4~26 | ||
| 15 | 10~60 | 3~25 |
[ ! ]Do not use the heater at a temperature exceeding the maximum operating temperature.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
■Connection Method
①Attach the lead wire to the two terminals and firmly connect them by soldering, etc.
■How to Mount
Use the heater in a position sandwiched between the metal block to be heated and the insulation board.
The clearance between the block and the insulation board should be as small as possible.
* The degree of contact between the heater and the object to be heated will affect the life of the heater.
A large clearance will delay the temperature rise time and create a delayed response to temperature adjustments.
■Precautions for Use
[ ! ] Do not use the heater at a temperature exceeding the maximum operating temperature of 200°C.
[ ! ] Never operate the heater when it is empty. Doing so may result in damage to the unit.
[ ! ] Apply electric power under the condition in which an object such as metal to be heated is attached to the heater.
[ ! ] Attach the object so that the heater comes into close contact with the surface to be heated. A gap will cause premature breakage of wire.
[ ! ] Make sure that the lead wire is not touching the metal plates when the heater is sandwiched between them.
[ ! ] Do not forcibly insert the heater between the metal plates. Doing so will cause the heater to crack.
[ ! ] The heater is not waterproof. Never expose the heater to water or any other liquids.
[ ! ] Use the temperature-rise data as a reference and do not heat too rapidly. Doing so will definitely result in breakage of wire.
[ ! ] Do not exceed the operating voltage (V) shown below. Doing so will cause breakage of the wire in the heater.
[ ! ] Do not bend fluorine resin tubes.
②After connection of the leads, protect them by firmly wrapping them with insulation tape.
①Attach the lead wire to the two terminals and firmly connect them by soldering, etc.
■How to Mount
Use the heater in a position sandwiched between the metal block to be heated and the insulation board.
The clearance between the block and the insulation board should be as small as possible.
* The degree of contact between the heater and the object to be heated will affect the life of the heater.
A large clearance will delay the temperature rise time and create a delayed response to temperature adjustments.
■Precautions for Use
[ ! ] Do not use the heater at a temperature exceeding the maximum operating temperature of 200°C.
[ ! ] Never operate the heater when it is empty. Doing so may result in damage to the unit.
[ ! ] Apply electric power under the condition in which an object such as metal to be heated is attached to the heater.
[ ! ] Attach the object so that the heater comes into close contact with the surface to be heated. A gap will cause premature breakage of wire.
[ ! ] Make sure that the lead wire is not touching the metal plates when the heater is sandwiched between them.
[ ! ] Do not forcibly insert the heater between the metal plates. Doing so will cause the heater to crack.
[ ! ] The heater is not waterproof. Never expose the heater to water or any other liquids.
[ ! ] Use the temperature-rise data as a reference and do not heat too rapidly. Doing so will definitely result in breakage of wire.
[ ! ] Do not exceed the operating voltage (V) shown below. Doing so will cause breakage of the wire in the heater.
[ ! ] Do not bend fluorine resin tubes.
②After connection of the leads, protect them by firmly wrapping them with insulation tape.
Example
Basic Information
| Application | Heating Metal | Usage Pattern | Individual Item | Category, Single Body | Ceramic Heater |
|---|---|---|---|---|---|
| Maximum Operating Temperature(°C) | 200 | Heating Area Material | Ceramics |
Please check the type/dimensions/specifications of the part MMCPH-20-10 in the Plate Heaters - Ceramic, Small Size series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| MMCPH-15-10 |
| MMCPH-15-15 |
| MMCPH-20-15 |
Additional Products in this Category
- Sheathed Liquid Heater Accessories - PF Threaded Welding Socket
- Band Heaters
- Cartridge Heaters - Lead Wire Protection with Knurled Flange
- Cartridge Heaters - L-Shaped
- Rubber Heaters - Square
- Far Infrared Heaters - Quartz Glass Tube
- Plate Heaters - Through Holes, Lead Wire or with Attachment Option
- Belt Heaters - Silicone, Micro
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy