(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Plastic Screws - Pan Head, Phillips Drive【100 Pieces Per Package】 (PACK-PPSA2.6-8)
- Volume Discount
•Shape: Standard
•Mounting Hole Shape: Phillips
•Material: Resin
•Shape: Pan Head
•Additional Shape: Standard
- inCAD Components
Part Number
Configured Part Number is shown.
PACK-PPSA2.6-8
・Materials
| Type | [ M ]Material |
| PACK-PPSA | PPS (Polyphenylenesulfide) |
| PACK-PEKS | PEEK (Polyetheretherketone) |
Specifications
| Part Number |
| PACK-PEKS4-20 |
| Part Number | M x P | D | H | |
| Type | M-L | |||
| PACK-PPSA PACK-PEKS | 2.6- 6 | 2.6 x 0.45 | 4.5 | 1.7 |
| 8 | ||||
| 10 | ||||
| 12 | ||||
| PACK-PPSA PACK-PEKS | 3- 6 | 3 x 0.5 | 5.5 | 2 |
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 15 | ||||
| 20 | ||||
| Part Number | M x P | D | H | |
| Type | M-L | |||
| PACK-PPSA PACK-PEKS | 4- 6 | 4 x 0.7 | 7 | 2.6 |
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 15 | ||||
| 20 | ||||
| PACK-PPSA PACK-PEKS | 5- 8 | 5 x 0.8 | 9 | 3.3 |
| 10 | ||||
| 12 | ||||
| 15 | ||||
| Part Number | M x P | D | H | |
| Type | M-L | |||
| PACK-PPSA PACK-PEKS | 6-10 | 6 x 1.0 | 10.5 | 3.9 |
| 15 | ||||
| 20 | ||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
■Mechanical Properties (Reference)
[ ! ]Shown above are reference values and not guaranteed ones.
[ ! ]Recommended tightening torque is torsional breaking torque x50%.
Use a torque driver and torque wrench for tightening.
[ ! ]Mechanical characteristics change depending on the operating environment.
Testing the product before use under actual usage state is recommended.
| Tensile Breaking Load N | Torsional Breaking Torque N·m | |||
| PACK-PPSA | PACK-PEKS | PACK-PPSA | PACK-PEKS | |
| M2.6 | 440 | 312 | 0.19 | 0.16 |
| M3 | 570 | 430 | 0.36 | 0.3 |
| M4 | 980 | 765 | 0.71 | 0.64 |
| M5 | 1570 | 1230 | 1.42 | 1.28 |
| M6 | 2250 | 1670 | 2.11 | 2.26 |
[ ! ]Recommended tightening torque is torsional breaking torque x50%.
Use a torque driver and torque wrench for tightening.
[ ! ]Mechanical characteristics change depending on the operating environment.
Testing the product before use under actual usage state is recommended.
■Guideline for Selection of Plastic Screws by Material①
◎: Excellent ○: Good △: Questionable
| Item | RENY | PPS | PPS Non-Glass Fiber | PEEK |
| Lightness | △ | △ | ○ | ○ |
| Water Absorption Stability | ◎ | ◎ | ◎ | △ |
| Strength / Rigidity | ◎ | ◎ | ○ | ○ |
| Impact Resistance | ◎ | ○ | ○ | ○ |
| Friction Resistance / Abrasion Resistance | ◎ | ◎ | ◎ | ◎ |
| Heat Resistance | △ | ◎ | ◎ | ◎ |
| Flame Resistance | △ | ◎ | ◎ | ◎ |
| Electrical Properties | ○ | ◎ | ◎ | ◎ |
| Weather Resistance | ○ | ○ | ○ | ◎ |
■Guideline for Selection of Plastic Screws by Material②
· RENY and PPS contains glass fiber.
· Continuous Use Temperature RENY: 105°C PPS / PPS Non-Glass Fiber: 200°C PEEK: 180°C, PPS Non-Glass Fiber: 200°C PEEK: 180°C Combustibility RENY: UL94HB PPS, PPS Non-Glass Fiber, PEEK: UL94 V-0, PPS Non-Glass Fiber
| Strength | RENY>PPS>PEEK>PPS Non-Glass Fiber |
| Heat Resistance | PPS / PPS Non-Glass Fiber>PEEK>RENY |
| Chemical Resistance | PEEK>PPS / PPS Non-Glass Fiber>RENY |
· Continuous Use Temperature RENY: 105°C PPS / PPS Non-Glass Fiber: 200°C PEEK: 180°C, PPS Non-Glass Fiber: 200°C PEEK: 180°C Combustibility RENY: UL94HB PPS, PPS Non-Glass Fiber, PEEK: UL94 V-0, PPS Non-Glass Fiber
■Physical Properties Table (Reference) [ ! ]Shown above are reference values and not guaranteed ones.
| Characteristics | Test Method | Unit | RENY | PPS | PPS Non-Glass Fiber | PEEK |
| ‹Mechanical Characteristics› | ||||||
| Tensile Strength | D638 | MPa | 285 | 196 | 90 | 91 |
| Elongation | D638 | % | 2.1 | 2.2 | - | 50~120 |
| Bending Strength | D790 | MPa | 380 | 255 | 140 | 147 |
| Flexural Modulus | D790 | GPa | 17.4 | 13.2 | 3.8 | 3.9 |
| Izot Impact Strength (Notched) | D256 | J/m | 110 | 98 | - | 88 |
| Rockwell Hardness | D785 | R and M Scale | M111 | M110 | - | R126 |
| ‹Thermal Characteristics› | ||||||
| Deflection Temperature under Load (1.82Mpa) | D648 | °C | 234 | 270 | 100 | 152 |
| Linear Expansion Coefficient | D696 | 10-5/K | 1.5 | 1.0 | - | 5.0 |
| ‹Electrical Characteristics› | ||||||
| Dielectric Constant (106Hz) | D150 | - | 4 | 4.6 | 3.6 | 3.3 |
| Dielectric Tangent (106Hz) | D150 | - | 0.009 | 0.002 | 0.001 | 0.004 |
| Volume Resistivity | D257 | Ω·cm | 1.0x109 | 1.0x1016 | 2.0x1016 | 4.9x1016 |
| Dielectric Breakdown Strength | D149 | MV/mm | 17 | 12 | - | 17 |
| Arc Resistance | D495 | sec | 129 | 120 | - | 23 |
| ‹Others› | ||||||
| Specific Gravity | D792 | - | 1.65 | 1.66 | 1.35 | 1.3 |
| Water Absorption (At 23°C in water x24h) | D570 | % | 0.14 | 0.015 | 0.02 | 0.500 |
| Fiber Glass Content | - | % | 50 | 40 | - | - |
■Chemical Resistance Data (Reference)
◎ Not Affected ○ Hardly Affected △ Somewhat Deteriorated
[ ! ]Chemical resistances vary depending on the condition of use. Be sure to test the product before use under expected application conditions.
| Chemical Name | Temperature | RENY | PPS / PPS Non-Glass Fiber | PEEK |
| Hydrochloric Acid 10% | 80°C | × | ○ | ◎ |
| Hydrochloric Acid 10% | Ambient Temperature | × | ◎ | ◎ |
| Nitric Acid 10% | 80°C | × | △ | ◎ |
| Nitric Acid 10% | Ambient Temperature | × | ◎ | ◎ |
| Sulfuric Acid 30% | 80°C | × | ○ | ○ |
| Sulfuric Acid 10% | 80°C | × | ○ | ○ |
| Sulfuric Acid 10% | Ambient Temperature | × | ◎ | ○ |
| Sodium Hydroxide 30% | 80°C | △ | ○ | ◎ |
| Sodium Hydroxide 10% | Ambient Temperature | ○ | ◎ | ◎ |
| Calcium Chloride (Saturation) | 80°C | △ | ◎ | ◎ |
| Acetone | Ambient Temperature | ○ | ◎ | ◎ |
| Methanol | 60°C | ○ | ◎ | ◎ |
| Gasoline | Ambient Temperature | ○ | ◎ | ◎ |
| Light Oil | Ambient Temperature | ○ | ◎ | ◎ |
| Motor Oil | 80°C | ○ | ◎ | ◎ |
| Gear Oil | 100°C | ○ | ◎ | ◎ |
[ ! ]Chemical resistances vary depending on the condition of use. Be sure to test the product before use under expected application conditions.
[ ! ]100 pcs. per pkg.
[ ! ]The surface colors of plastic Phillips pan head screws
may change somewhat depending on production lot and other conditions.
[ ! ]Sometimes black spots on the surface may be seen, which does not affect its performance.
[ ! ]The surface colors of plastic Phillips pan head screws
may change somewhat depending on production lot and other conditions.
[ ! ]Sometimes black spots on the surface may be seen, which does not affect its performance.
· RENY-Glassfiber Reinforced Polyamide MXD6
RENY is based on polyamide MXD6 and is also a crystalline engineered plastic reinforced with 50% glass fiber. It has the highest strength and elasticity among engineered plastics, and excels in both oil and heat resistance. Thus, it is used as an alternative to metal.
· PPS-Polyphenylenesulfide
PPS is a crystalline super engineered plastic. It has excellent heat resistance, and does not deteriorate in physical properties even when it is used for long durations in high temperature atmosphere. In addition, it excels in chemical resistance, mechanical characteristics, electrical properties and dimensional stability.
· PEEK-Polyetheretherketone
PEEK is semicrystalline super engineered plastic with the highest performance. It has the highest chemical resistance among all engineered plastics. The only generally used chemical that dissolves PEEK is concentrated sulfuric acid. PEEK also excels in heat resistance, abrasion resistance, flame resistance and hydrolysis resistance.
RENY is based on polyamide MXD6 and is also a crystalline engineered plastic reinforced with 50% glass fiber. It has the highest strength and elasticity among engineered plastics, and excels in both oil and heat resistance. Thus, it is used as an alternative to metal.
· PPS-Polyphenylenesulfide
PPS is a crystalline super engineered plastic. It has excellent heat resistance, and does not deteriorate in physical properties even when it is used for long durations in high temperature atmosphere. In addition, it excels in chemical resistance, mechanical characteristics, electrical properties and dimensional stability.
· PEEK-Polyetheretherketone
PEEK is semicrystalline super engineered plastic with the highest performance. It has the highest chemical resistance among all engineered plastics. The only generally used chemical that dissolves PEEK is concentrated sulfuric acid. PEEK also excels in heat resistance, abrasion resistance, flame resistance and hydrolysis resistance.
Basic Information
| Detailed Shape | Pan Head | Mounting Hole Shape | Phillips | Basic Shape | Standard |
|---|---|---|---|---|---|
| Material | Resin | Surface Treatment | None | Additional Shapes | Standard |
| Application | Heat resistant / Abrasion Resistance |
Please check the type/dimensions/specifications of the part PACK-PPSA2.6-8 in the Plastic Screws - Pan Head, Phillips Drive series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| PACK-PEKS2.6-8 |
| PACK-PEKS3-10 |
| PACK-PEKS3-12 |
| PACK-PPSA3-10 |
| PACK-PPSA3-12 |
| PACK-PPSA3-15 |
Additional Products in this Category
- Plastic Screws - Hex Socket Head Cap, SPS-C
- Plastic Screws - Low Hex Socket Head Cap, Black, RENY
- Plastic Screws - Pan Head, Phillips Drive, Tapping Screw, RENY/TPH
- Plastic Screws - Low Head, Torx Drive, RENY-BK/LH
- Plastic Screws - Long Stud Bolt, RENY/ZB
- Plastic Screws - Disc Head, Phillips Drive, Cross Recessed, PEEK/FH
- Plastic Screws - Micro Pan Head, Phillips Drive, Cross Recessed, PEEK/MPH
- Plastic Screws - Low Head, Hex Socket, PEEK/LC
Complementary Products
-
Hex Socket Cap Screw - M4 - M10, Coarse, Configurable Length, Partially Threaded
MISUMI Days to Ship : 9 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy