(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Telescopic Slide Rails - 3 Steps, Stainless Steel, Simple Detent Mechanism. (SSRXC2708)

Telescopic Slide Rails - 3 Steps, Stainless Steel, Simple Detent Mechanism. SSRXC2708
  • Volume Discount

The rails are made of SUS304, which has excellent corrosion resistance and can locks at full close.

  • inCAD Components

(i)Caution

  • Only the SSRXC27 model is the hold-closed type
  • There are no holes in the leaf spring part of SSRXC27
Telescopic Slide Rails- Stainless Steel, Light Load, Three Step Simplified Open-Retention Type:Related Image
・Materials
[ M ] Material: Rail: 304 Stainless Steel Ball: 440C Stainless Steel
 

Specifications

Part Number
SSRXC2708
SRXY2735
Part NumberRail LengthStrokeABLoad Rating (N/2 pcs.)
TypeNo.
SSRXY27
SSRXC27
08203.2225.2143.2163.2373
10254276.0194214.0363
12304.8326.8244.8264.8353
14355.6377.6295.6315.6333
16406.4428.4346.4366.4313
18457.2479.2397.2417.2294
20508530.0448468.0275
[ ! ]The rails can not be pulled apart.[ ! ]Use M4 Hex Socket Button Screws (>>Click here) or Cross Recessed Pan Head Screws (>>Click here) to mount rails [ ! ]For larger quantity orders "Days to Ship" may differ from published catalog term.

Technical Information

Load Rating Definition

Rated load is a static load at the center of extended rail on drawer side. (N/2 pieces).

Installation Positioning

  • Install slide rails to be parallel to each other and perpendicular to vertical surface.

  • Load ratings and performance can diminish sharply if rails are not properly installed. For horizontal installation, the target value of load rating is 25% (Reference Value).

  • For horizontal installation, if the applied load is more than the above reference value, or if the center of gravity is put over positions separated from rail center, inner rails may fall off outer rails. Please test and confirm this issue before using the product.

Installation Positioning Examples

Slide rails are installed vertically and in parallel.

Slide rails are not vertically installed.

Slide rails are not horizontally aligned.

Applying loads on ends when mounted horizontally.

Support Information

Ball Retainer Misalignment

Due to one of the characteristics of the slide rails, the ball retainer can become misaligned and stop before the slide rail is fully opened or closed. This phenomenon is called "Ball Retainer Misalignment". In the event that the ball retainer becomes misaligned, the travel distances between the right and left sliding guides become unequal, as shown in the figure.

Retainers reach their left ends of the outer rails, but misalignment prevents the product from becoming the full stroke state.
In order to resolve Ball Retainer Creep phenomenon, strongly slide inner rails to put the product in full stroke state.

Application Examples of Telescopic Slide Guide

Cautions

  • The contact of the ball may change due to difference in the gravity center position, or in moving distance between right and left slides, this can cause misalignment.

  • If an unbalanced load is applied due to a location deviation of grips toward one side slide rail, Ball Retainer Misalignment phenomenon may occur. Be careful about this upon designing.

Caution on other operations

  • Strong shocks while opening / closing slide rails will cause damage. Installation of stopper or buffer on the housing is recommended to protect slide rails from strong shocks.

Way to use

Closed latch Mechanism

When the rail is fully pulled out, the tab snap fits into the plate spring and locks, temporarily preventing retraction. This is suitable for operations when drawer is typically open.

Compatible Models

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SSRXC2708
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSRail Length
(mm)
Stroke
(mm)
Load Rating (N/2 pcs.)
(N)
Simple Open-Close Retention
1 Piece(s)Available

8 Days or more

10203.2225.2373Included

Loading...

  1. 1
 

Basic Information

Surface Treatment No Height(mm) 19.1 Width(mm) 27
Material of ball 440C Stainless Steel

Please check the type/dimensions/specifications of the part SSRXC2708 in the Telescopic Slide Rails - 3 Steps, Stainless Steel, Simple Detent Mechanism. series.

Products like this...

Part Number
SSRXC2710
SSRXC2712
SSRXC2714
SSRXC2716
SSRXC2718
SSRXC2720
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSRail Length
(mm)
Stroke
(mm)
Load Rating (N/2 pcs.)
(N)
Simple Open-Close Retention
1 Piece(s)Available

8 Days or more

10254276363Included
1 Piece(s)Available

8 Days or more

10304.8326.8353Included
1 Piece(s)Available

8 Days or more

10355.6377.6333Included
1 Piece(s)Available

8 Days or more

10406.4428.4313Included
1 Piece(s)Available

8 Days or more

10457.2479.2294Included
1 Piece(s)Available

8 Days or more

10508530275Included

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.