(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Categories

Applications

Brands

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Part Number Checker

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Linear Ball Bushings - Pilot flanged, double, with MX lubrication unit. (LHISW-MX16)

Linear Ball Bushings - Pilot flanged, double, with MX lubrication unit. LHISW-MX16

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

MISUMI

MISUMI

Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product

  • METRIC
  • inCAD Components

PDFP.2019-372

Unit examples related to this product
Cylindrical Sheet Heat Welding
View other unit examples

Part Number

Configured Part Number is shown.

LHISW-MX16

Flanged Linear Bushing with Lubrication Unit MX - Double Bushing with Pilot:Related Image
[ ! ]For Pilotted and Flanged Type application examples, see >> Click here
・Materials
TypeOuter CylinderBallsPad Case / RetainerAmbient Operating Temp.[ A ]Accessories
Round FlangedSquare FlangedCompact Flanged[ M ]Material[ H ]Hardness[ S ][ M ]Material[ M ]Material
LHIRW-MXLHISW-MXLHICW-MX52100 Bearing Steel 58HRC ~-52100 Bearing Steel Plastic
(Duracon M90)		-20~80°CSeal[ M ]Material
Nitrile Rubber

Specifications

Part Number
LHIFS-MX25
LHIRW-MX16
[ NG ]Various Grease Application Services are not applicable.
Part NumberDLL1VℓHTdd1tP.C.D.WFAEccentricityRows of Balls*PerpendicularityBasic Load RatingAllowable Static Moment
(Mo N·m)		Mass (g)
TypedrToleranceToleranceToleranceC (Dynamic) NCo (Static) NRound FlangeSquare FlangeCompact Flange
LHIRW-MX
LHISW-MX
LHICW-MX
100
- 0.010		190
- 0.016		6555±0.3564064.57.54.12930-290.01540.01558811007.241028294
122168575.5423232-32657120010.911494106
16288270648383722311230235019.7197172189
200
- 0.012		320
- 0.019		9480785485.595.1434224360.02050.0201400274026.8271236258
25401301129625150324061560314043.4559519544
3045143123101074106.6116.1605835492490549082.8704614669
350
- 0.015		520
- 0.022		1571351182676438550.0250.025265062701101048958973
4060175151121396139148.17875456434308040147160314131456
50802201921411698925680608015900397366334633500
[ ! ]For Precautions for Use, see >> Click here [ ! ]Height-Adjusting Spacers for Flanged Bushings can be chosen from >> Click here * Perpendicularity of D to flange mounting surface
kgf=Nx0.101972

Price list

drFlanged, Single, PilotFlanged, Double, Pilot
Round FlangeSquare FlangeCompact FlangeRound FlangeSquare FlangeCompact Flange
LHIFR-MXLHIFS-MXLHIFC-MXLHIRW-MXLHISW-MXLHICW-MX
Unit PriceVolume Discount RateUnit PriceVolume Discount RateUnit PriceVolume Discount RateUnit PriceVolume Discount RateUnit PriceVolume Discount RateUnit PriceVolume Discount Rate
1~9 pc(s).10~19 pcs.1~9 pc(s).10~19 pcs.1~9 pc(s).10~19 pcs.1~9 pc(s).10~19 pcs.1~9 pc(s).10~19 pcs.1~9 pc(s).10~19 pcs.
108608109809309509001,4601,3801,6901,6001,6301,540
129208701,0309701,0109501,5501,4701,8101,7101,7301,640
161,1401,0801,2901,2201,2501,1801,9401,8402,2702,1502,1602,050
201,3501,2801,5301,4501,5001,4202,3402,2202,7302,5902,5602,430
251,9101,8102,1802,0702,1202,0103,3403,1703,9003,7003,6103,420
302,5802,4502,9502,8002,8302,6804,5804,3505,3505,0804,9304,680
354,0003,8004,6104,3704,8504,6007,6507,2609,0208,5608,9008,450
405,0804,8205,8705,5706,1805,8709,7909,30011,51010,93011,41010,830
506,7206,3807,7907,4008,2107,79013,09012,43015,44014,66015,27014,500
[ ! ]For orders larger than indicated quantity, please request a quotation.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
LHISW-MX16
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSFor Shaft Size
(mm) 		Overall Length L
(mm) 		O.D. D
(mm) 		Basic Dynamic Load Rating (Details)
(N) 		Basic Static Load Rating
(N) 		Inner Contact Circle Tolerance (Negative Side)
(mm) 		Eccentricity
(µm) 		Flange Shape
1 Piece(s)Available

8 Days or more

1016822812302350-0.0115Square Flanged

Loading...

  1. 1

Support Information

Reference: Tolerance Range of Linear Bushing and Shafts made by MISUMI

For MISUMI Linear Bushing, it is recommended to use the combination with MISUMI Shafts (hardened to g6 tolerance).

H6H7H8H9Applicable PartFunctional ClassificationApplication Example
Can be Moved RelativelyClearance FitRoll Fitf6f7f7
f8		Fitted to provide adequate clearance to permit movement (high quality fit).
Regular normal temperature bearing lubricated with grease or oil.		Regular Fitting (Often comes apart.)Part into which a cooled exhaust valve box is inserted.
Regular Shaft and Bushing
Link lever and bushing
Fine Roll Fitg5g6Continuously revolving part of a precision machine under a light load.
Fitting with a narrow gap so as to permit movement (spigot and positioning).
Precision sliding part.		Part required for precise motion with virtually no backlash.Link Device Pin and Lever
Key and its groove
Precision control valve rod
Cannot be Moved RelativelyTransition FitSliding Fith5h6h7
h8		h9Fitting so as to permit movement by hand, with a lubricant applied (high-quality positioning).
Special High Precision Sliding Part
Unimportant Stationary Part		Can be disassembled and reassembled without damaging components.Force cannot be transmitted by the fitting force alone.Fitting a rim and a boss together
Fitting the gear of a precision gear device
Push Fith5
h6		js6Fitting that accommodates a slight gap.
Precision fitting that locks both parts during use.
Fitting that allows assembly and disassembly with a wooden or lead hammer.		Fitting Coupling Flanges Together
Governor Path and Pin
Fitting a Gear Rim and a Boss Together

Features

MX Lubrication Unit

Lubrication Unit MX has a fiber pad that contains the lubricant. The capillary action allows the lubricant to reach the mating surfaces.

As a result, an oil film is always formed between the balls and the shaft, significantly extending service intervals.

If an unbalanced load is applied due to the deflection of the handles to one side of the slide guide, the phenomenon of "Ball Retainer Misalignment" may occur.

Keep this in mind when designing.

Endurance Test Result

Test Conditions

Product:

LMU12 (Linear bushing before removing the oil protection against rust.)
LMU-MX12 (Linear bushing with lubrication unit MX)

Applied Load: 206N (50% against Basic Dynamic Load Rating 412N)
Average Speed: 42 m/min (0.7 m/sec)
Stroke : 100 mm
Lubricant: Grease, initial fill (LMU-MX12 only)
Shaft Material: 52100 Bearing steel 58 HRC
24 hours, continuously operated.

With 50% of basic load rating applied for testing, the Lubrication Unit MX Type has shown a 2.5 times higherdurability performance compared to the one without the MX lubrication unit.

*The data shown above are for reference only, and are not guaranteed by the supplier

Characteristics

Extended Maintenance Period:

Long durability of lubrication performance have resulted in significant reduction of maintenance work especially with machines and equipment environments where applying grease is not easy.

Environmentally friendly system:

Proper amount of lubricant to ball rolling surface at right time makes the system environment-friendly.

Cost Advantage:

Contributes to reduction of maintenance costs and product troubles caused by failing to lubricate.

Reduced Procedural Steps

No need to fill with grease prior to use because the product is already filled with Lithium soap-based grease in addition to the built-in lubrication unit.

Way to Use

Mounting Considerations

– When mounting the flanged type bushing with MX lubrication unit, do not use the lubrication housing as a pilot as shown in (2), because it may damage the housing. Instead, use the Flanged Type with Pilot as shown in (3).

– Do not disassemble the lubrication unit as this may cause failure or shorten the life of the product.

Flanged Type
(Correct Mounting)

Flange Type
(Incorrect Mounting)

Flanged Type with Pilot
(Correct Mounting)

Features

Linear bushings compatible with low-temperature black chrome plating

*The photo shows the condition of the shafts & linear bushings after the sliding test.

ー Low-temperature black chrome plating on linear bushings is a 5µm fluoropolymer layer chemically deposited as a black film, and it has a long-lasting rust preventive effect.
In addition, the coating is resistant to cracking from extreme and repeated bending.

ー Low-temperature black chrome-plated shafts are suitable for locations where rusting or light reflection is undesirable.

ーWhen used as an assembly with a linear shaft that is compatible with low-temperature black chromium plating, it is suitable for rust prone locations.

Note: The bore of the low-temperature chromium-plated Linear Bearing has no surface treatment.

Sliding Test Conditions

50 km sliding test was conducted with a 412 N load on the linear bushing.
No performance degradation after testing.

Linear bushing model compatible with low temperature black chrome plating.

Straight TypeCompatible Inner Diameter
Single TypeΦ3～φ30
Double TypeΦ5～φ30
Flange TypeCompatible Inner Diameter
Single TypeΦ6～φ30
Double Type

MISUMI linear bushings, with the exception of the MX type lubrication unit, are coated with anti-rust oil, but not with grease. By selecting the grease below, you can switch to one with grease application.

Antirust Performance Comparison Test (Reference)

52100 Bearing Steel440C Stainless SteelElectroless Nickel PlatingLow Temperature Black Chrome Plating
Before the test
72 hrs
168 hrs

Test Method: Salt water spray testing method conforms to JIS H8502.
(Spray 35°C, 5% NaCl Solution)
Test Sample: Round Flanged Linear Bushings – Single Type

Compatible Models

CategoryLinear ShaftsShaft CollarsShaft SupportsPlain & Self-Lubricating BearingsRound Wire Springs
ImageLinear Ball Bushings - Linear ShaftsLinear Ball Bushings - Shaft CollarsLinear Ball Bushings -Shaft SupportsLinear Ball Bushings -Plain & Self-Lubricating BearingsLinear Ball Bushings - Round Wire Springs
 

Basic Information

TYPE Flange Motion Linear Motion Style Standard
Outer Cylinder Material 52100 Bearing Steel Equivalent Outer Cylinder Surface Finish None Flange Type Pilot Flanged
Lubrication Type with MX Lubrication Unit Ball Recirculating Type Double Precision High Grade
Ball Material 52100 Bearing Steel Equivalent Retainer Material Plastic (Duracon M90 Equivalent) Seals With Seal
Counterbored Hole Standard Greased filled Lithium Soap Base

Please check the type/dimensions/specifications of the part LHISW-MX16 in the Linear Ball Bushings - Pilot flanged, double, with MX lubrication unit. series.

Configure

Clear All

1 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • type

    • LHICW-MX
    • LHIRW-MX
    • LHISW-MX

    Clear

  • For Shaft Size(mm)

    • 10
    • 12
    • 16
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Overall Length L(mm)

    • 65
    • 68
    • 82
    • 94
    • 130
    • 143
    • 157
    • 175
    • 220

    Clear

  • O.D. D(mm)

    • 19
    • 21
    • 28
    • 32
    • 40
    • 45
    • 52
    • 60
    • 80

    Clear

  • Eccentricity(µm)

    • 15
    • 20
    • 25

    Clear

  • Flange Shape

    • Compact Flanged
    • Round Flanged
    • Square Flanged

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 8 Days or Less

    Clear

Specify Alterations

Products like this...

Part Number
LHICW-MX20
LHICW-MX25
LHICW-MX30
LHISW-MX20
LHISW-MX25
LHISW-MX30
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSFor Shaft Size
(mm) 		Overall Length L
(mm) 		O.D. D
(mm) 		Basic Dynamic Load Rating (Details)
(N) 		Basic Static Load Rating
(N) 		Inner Contact Circle Tolerance (Negative Side)
(mm) 		Eccentricity
(µm) 		Flange Shape
1 Piece(s)Available

8 Days or more

1020943214002740-0.01220Compact Flanged
1 Piece(s)Available

8 Days or more

10251304015603140-0.01220Compact Flanged
1 Piece(s)Available

8 Days or more

10301434524905490-0.01220Compact Flanged
1 Piece(s)Available

8 Days or more

1020943214002740-0.01220Square Flanged
1 Piece(s)Available

8 Days or more

10251304015603140-0.01220Square Flanged
1 Piece(s)Available

8 Days or more

10301434524905490-0.01220Square Flanged

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Try to Find Other Examples

back next

Tech Support

Technical Support
Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.
Technical Inquiry

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information
Contact Us

Inquiry Format

Go to Mobile site

Copyright © MISUMI Corporation All Rights Reserved.