(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Hot-Water Tubes
For complete product overview and details on Hot-Water Tubes see the sections below:
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| M-NB0425-[5,10,20,100]-[B,W] |
| M-NB0640-[5,10,20,100]-[B,W] |
| M-NB0860-[5,10,20,100]-[B,W] |
| M-NB1075-[5,10,20,100]-[B,W] |
| M-NB1290-[5,10,20,100]-[B,W] |
| M-SFT0640-[5,10,20]-C |
| M-SFT0860-[5,10,20]-C |
| M-SFT1075-[5,10,20]-C |
| M-SFT1290-[5,10,20]-C |
| M-WE0425-[5,10,20]-W |
| M-WE0640-[5,10,20]-W |
| M-WE0860-[5,10,20]-W |
| M-WE1075-[5,10,20]-W |
| M-WE1290-[5,10,20]-W |
Loading...
Specifications
| Ext. dia.of tube | Int. dia.of tube | Min. bend radius | Usable Pressure | Part Number | Full length L (meter) | Color C | |
| Type | No. | ||||||
| 4 | 2.5 | 14 | 0~300 kPa 0~3 kgf/cm2 | M-WA | 0425 | 5 10 20 100 | B (Blue) W (Milky white) |
| 6 | 4 | 18 | 0640 | ||||
| 8 | 6 | 28 | 0860 | ||||
| 10 | 7.5 | 36 | 1075 | ||||
| 12 | 9 | 40 | 1290 | ||||
| 6 | 4 | 30 | *See the recommended usage pressure table. | M-SFT | 0640 | 5 10 20 | C (Transparent) |
| 8 | 6 | 48 | 0860 | ||||
| 10 | 7.5 | 60 | 1075 | ||||
| 12 | 9 | 72 | 1290 | ||||
 Full length L is in meter increments. | |||||||
More Information
■Recommended usage pressure table of hot-water tube (M-SFT) kPa{kgf/cm2}| Temperature Part Number | 25°C | 50°C | 75°C | 100°C | 120°C | |
| M-SFT0640 | Recommended usage pressure | 1750 {17.5} | 1250 {12.5} | 1000 {10} | 875 {8.75} | 650 {6.5} |
| Burst pressure | 7000 {70} | 5000 {50} | 4000 {40} | 3500 {35} | 2600 {26} | |
| M-SFT0860 | Recommended usage pressure | 1250 {12.5} | 875 {8.75} | 750 {7.5} | 500 {5} | 475 {4.75} |
| Burst pressure | 5000 {50} | 3500 {35} | 3000 {30} | 2000 {20} | 1900 {19} | |
| M-SFT1075 | Recommended usage pressure | 1250 {12.5} | 875 {8.75} | 750 {7.5} | 500 {5} | 325 {3.25} |
| Burst pressure | 5000 {50} | 3500 {35} | 3000 {30} | 2000 {20} | 1300 {13} | |
| M-SFT1290 | Recommended usage pressure | 1250 {12.5} | 875 {8.75} | 750 {7.5} | 500 {5} | 300 {3} |
| Burst pressure | 5000 {50} | 3500 {35} | 3000 {30} | 2000 {20} | 1200 {12} | |
Recommended usage pressure is 1/4 the burst pressure. Be sure to use the tube under the recommended usage pressure.Example
●Notes
① Select an appropriate tube in accordance with cooling water temperature.
② Tube can be used for both cooling water and oil. (Water only for M-WE)
③ Cut the tube end squarely (at a right angle) to put it into a quick-fitting mold joint or bolting joint-otherwise the tube may come out unexpectedly or cause water leakage.
④ Use the special insert sleeve together with these tubes to connect to a quick-fitting mold joint.Use without an insert sleeve may cause the tube to fall off unexpectedly or result in water leakage.
⑤ The higher the temperature rises, the lower the burst pressure of hot-water tube (M-SFT) falls. Use the tube in high temperature after making sure of the burst pressure.
⑥ When fitting the tube to bolting joints again, fit it after cutting the part fitted before.
Usage without cutting could cause the tube to fall off unexpectedly or result in water leakage.
Basic Information
| Clamping structure | No |
|---|
Specification/Dimensions
-
External dia.(mm)
-
Int. dia.(mm)
-
Upper limit of temperature
- 120
- 90
- 99
-
Lower limit of temperature
- 0
- -15
-
Color
- B (Blue)
- C (Transparent)
- W (Milky white)
-
L (L dimension)(m)
-
type
- M-NB
- M-SFT
- M-WE
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Tube Cutters
- Rubber Hose For High-Temperature Water
- High-Temperature Rubber Hose -Heat-Resistant 120degree・Heat-Resistant 150degree-
- Mold-Cooling Flexible Hoses
- Mold-Cooling Flexible Hoses (Stainless Steel)
- Flexible Hose with Protection Spring - Stainless Steel (MISUMI)
- Simple Flow Meter - Large Flow Rate (MISUMI)
- Flow Meter with Thermometer and Pressure Gauge (MISUMI)
Complementary Products
-
High-Temperature Rubber Hose -Heat-Resistant 120degree・Heat-Resistant 150degree-
MISUMI Days to Ship : 10 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy