No.000180 Mechanism to Check Part Condition

Good IDEA!

2

Application Overview

Purpose

• Purpose
  • Prevents failure when closing or affixing the maintenance door.
• Operation
  • After closing the door, fix the bracket connected to the door with the spring hinge using the knurled knob. At this point, the bracket shields the sensor from light. By removing the knurled knob, the bracket and knob are flipped up, tripping the check sensor.

Points for use

• Manually operated.

Target workpiece

• Doors that require interlock

  A mechanism, used as a safety mechanism, that disables other operations when predetermined conditions are not satisfied.

  .

Design Specifications

Selection Criteria for Main Components

• Spring hinges that can be flipped up against the weight of the knob.

Design Evaluation

Verification of main components

• The spring hinges are verified based on the load moment, to see whether the dog moves away from the sensor.
• • Conditional Value:
    Total mass of dog and knob: m = 0.10kg
    Horizontal distance between hinge shaft and center of gravity of dog and knob: a 20.0mm
    Load of hinge spring: k = 0.40kgf
    Hinge spring load definition angle: θ = 270°
    Hinge spring load position: b = 16mm
    Number of hinge springs: n = 2pieces
    Hinge spring load in free condition: k0 = 0.10kgf
    Hinge spring angle in free condition: θ0=90°
    Target hinge angle: θ1 = 225°
    Gravitational acceleration: g = 9.8m/s2
    
    Hinge spring load at target angle: k1 = {(k - k0)/(θ - θ0)} x θ1 = {(0.4 - 0.1)/(270 - 90)} x 225 = 0.375kgf
    Total hinge spring load at target angle: k1' = k1 x n = 0.375 x 2 = 0.75kgf
    
    Moment by dog and knob: M1=m x g x a, hence, M1 = 0.1 x 9.8 x 20 = 2.0kgf・mm
    Moment by hinge: M2 = k1' x b, hence, M2 = 0.75 x 16 = 12.0kgf・mm
    From M1 < M2, the angle of the hinge at an unfixed state satisfies the target angle θ1 at which the dog moves away from the sensor.

Other Design Consideration

• The mechanism is designed so that when flipped up, the spring hinge flips the total weight of the dog away from the sensor.
• The photomicrosensor should be set to turn on when shielded from light, and the interlock

  A mechanism, used as a safety mechanism, that disables other operations when predetermined conditions are not satisfied.

  should be applied when the sensor turns off due to the door being open or failure of the sensor.