(!)Debido al final de soporte anunciado por Microsoft para Internet Explorer 11 con fecha del 15/06/2022, este sitio no recomienda el uso de ese navegador.
Tiene la cabeza de forma típica (cónica) y puede caracterizarse por una baja disponibilidad de costos y una gran cantidad de variaciones.
Número de Parte
Se muestra el número de parte configurado
Material Número | [ M ] Material | [ S ] Tratamiento de superficies | [H] Dureza | Tipo | |
Redondo | (Diamante) | ||||
(1) | Equivalente a la herramienta de acero O1 | — | Dureza tratada: 60 a 63HRC | KFTA | KFTD |
(2) | Equivalente a la herramienta de acero O1 | Revestimiento de cromo duro | Dureza: 50 to 55HRC Dureza del enchapado: 750HV ~ | GKFTA | GKFTD |
(3) | Equivalente a la herramienta de acero O1 | — | — | BKFTA | BKFTD |
(4) | Acero inoxidable 304 | — | — | SKFTA | SKFTD |
(5) | Acero inoxidable 304 | Revestimiento de cromo duro | Dureza del enchapado: 750HV ~ | HKFTA | HKFTD |
(6) | Acero inoxidable 440C | — | Dureza tratada: 50 a 55HRC | CKFTA | CKFTD |
Número de pieza | — | P | — | L | — | B | — | E | — | A | ||||||||
Tipo | Forma | Tol. D | P Tolerancia | D | ||||||||||||||
GKFT | A | G | S | 10T | — | P13.00 | — | L6 | — | B4.0 | — | E10.0 | — | A15 |
D o P | Grado estándar | ||||
M | P | G | H | S | |
m6 | p6 | g6 | h7 | — | |
5.00 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | 0 -0.01 |
6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |
10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |
18.01 ~ 30.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 |
Número de pieza | P Incremental de 0.01 mm | L Incrementos de 1 mm | B Incrementos de 0.1 mm | E Incrementos de 0.1 mm | A | (W) | M (Gruesa) | ℓ | ||||
Tipo | Forma | Tolerancia D | P Tolerancia | D | ||||||||
KFT GKFT BKFT SKFT HKFT CKFT | A (redondo) D (diamante) | M P G H | S M P G H | 5 | 5.00 to 8.00 | 5 (9) Up to 10 | 1.5 to 15.0 (12.0) | 0.5 to 10.0 | 15 30 45 60 | 2.2 | M2 | 3 |
6 | 6.00 to 10.00 | 6 (9) Up to 12 | 1.5 to 15.0 (12.0) | 3 | M3 | 5 | ||||||
6T | 3 | M2.6 | 4 | |||||||||
8 | 8.50 to 15.00 | 8 (12) Up to 16 | 1.5 to 30.0 (15.0) | 3.5 | M5 | 8 | ||||||
8T | 6 (12) Up to 16 | 3.5 | M4 | 6 | ||||||||
10 | 10.00 to 17.00 | 10 (12) Up to 20 | 3.0 to 30.0 (20.0) | 4 | M5 | 8 | ||||||
10T | 6 (12) Up to 16 | 4 | M4 | 6 | ||||||||
12 | 12.00 to 18.00 | 12 to 24 | 3.0 to 30.0 (20.0) | 5 | M5 | 8 | ||||||
12T | 8 (12) Up to 18 | 5 | M4 | 6 | ||||||||
13 | 13.00 to 20.00 | 13 (14) Up to 26 | 5.0 to 30.0 (20.0) | 5.5 | M8 | 10 | ||||||
13T | 8 (14) Up to 20 | 5.5 | M6 | 9 | ||||||||
16 | 16.00 to 27.00 | 16 to 32 | 5.0 to 30.0 (27.0) | 7 | M8 | 12 | ||||||
16T | 10 (14) Up to 24 | 7 | M6 | 9 | ||||||||
20 | 20.00 to 30.00 | 20 to 40 | 5.0 to 30.0 | 9 | M8 | 12 | ||||||
20T | 12 (18) Up to 30 | 9 | M6 | 9 |
D | Tamaños disponibles con forma redonda | Tamaños disponibles con forma de diamante | ||||||||||
①Herramienta de acero O1 endurecido KFTA | ②Herramienta de acero O1 duro GKFTA | ③Acero O1 para herramientas BKFTA | ④304 acero inoxidable SKFTA | ⑤Acero inoxidable duro 304 HKFTA | ⑥Acero inoxidable 440C CKFTA | ①Herramienta de acero O1 endurecido KFTD | ②Herramienta de acero O1 duro GKFTD | ③Acero O1 para herramientas BKFTD | ④304 acero inoxidable SKFTD | ⑤Acero inoxidable duro 304 HKFTD | ⑥Acero inoxidable 440C CKFTD | |
5 | — | |||||||||||
6 | ||||||||||||
6T | ||||||||||||
8 | ||||||||||||
8T | ||||||||||||
10 | ||||||||||||
10T | ||||||||||||
12 | ||||||||||||
12T | ||||||||||||
13 | ||||||||||||
13T | ||||||||||||
16 | ||||||||||||
16T | ||||||||||||
20 | ||||||||||||
20T |
Los archivos CAD para descarga y la vista previa 3D no están disponibles debido a que el número de parte no ha sido confirmado.
Número de Parte |
---|
GKFTDPM12T-P[12-18/0.01]-L[12-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPM13-P[13-20/0.01]-L[14-26/1]-B[5-20/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPM13-P[13-20/0.01]-L[14-26/1]-B[5-20/0.1]-E[0.5-15/0.1]-AA[15,30,45,60] |
GKFTDPM13T-P[13-20/0.01]-L[14-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPM16-P[16-27/0.01]-L[16-32/1]-B[5-27/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPM16T-P[16-27/0.01]-L[14-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPM20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPM20T-P[20-30/0.01]-L[18-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP5-P[5-8/0.01]-L[9-10/1]-B[1.5-12/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP6-P[6-10/0.01]-L[9-12/1]-B[1.5-12/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP6T-P[6-10/0.01]-L[9-12/1]-B[1.5-12/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP8-P[8.5-15/0.01]-L[12-16/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP8T-P[8.5-15/0.01]-L[12-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP10-P[10-17/0.01]-L[12-20/1]-B[3-20/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP10T-P[10-17/0.01]-L[12-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP12-P[12-18/0.01]-L[12-24/1]-B[3-20/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP12T-P[12-18/0.01]-L[12-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP13-P[13-20/0.01]-L[14-26/1]-B[5-20/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP13-P[13-20/0.01]-L[14-26/1]-B[5-20/0.1]-E[0.5-15/0.1]-AA[15,30,45,60] |
GKFTDPP13T-P[13-20/0.01]-L[14-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP16-P[16-27/0.01]-L[16-32/1]-B[5-27/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP16T-P[16-27/0.01]-L[14-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPP20T-P[20-30/0.01]-L[18-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS5-P[5-8/0.01]-L[9-10/1]-B[1.5-12/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS6-P[6-10/0.01]-L[9-12/1]-B[1.5-12/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS6T-P[6-10/0.01]-L[9-12/1]-B[1.5-12/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS8-P[8.5-15/0.01]-L[12-16/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS8T-P[8.5-15/0.01]-L[12-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS10-P[10-17/0.01]-L[12-20/1]-B[3-20/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS10T-P[10-17/0.01]-L[12-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS12-P[12-18/0.01]-L[12-24/1]-B[3-20/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS12T-P[12-18/0.01]-L[12-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS13-P[13-20/0.01]-L[14-26/1]-B[5-20/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS13-P[13-20/0.01]-L[14-26/1]-B[5-20/0.1]-E[0.5-15/0.1]-AA[15,30,45,60] |
GKFTDPS13T-P[13-20/0.01]-L[14-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS16-P[16-27/0.01]-L[16-32/1]-B[5-27/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS16T-P[16-27/0.01]-L[14-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
GKFTDPS20T-P[20-30/0.01]-L[18-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG8T-P[8.5-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG10-P[10-17/0.01]-L[10-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG10T-P[10-17/0.01]-L[6-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG12-P[12-18/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG12T-P[12-18/0.01]-L[8-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG13T-P[13-20/0.01]-L[8-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG16-P[16-27/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG16T-P[16-27/0.01]-L[10-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPG20T-P[20-30/0.01]-L[12-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH8T-P[8.5-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH10-P[10-17/0.01]-L[10-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH10T-P[10-17/0.01]-L[6-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH12-P[12-18/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH12T-P[12-18/0.01]-L[8-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH13T-P[13-20/0.01]-L[8-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH16-P[16-27/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH16T-P[16-27/0.01]-L[10-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPH20T-P[20-30/0.01]-L[12-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM8T-P[8.5-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM10-P[10-17/0.01]-L[10-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM10T-P[10-17/0.01]-L[6-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM12-P[12-18/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM12T-P[12-18/0.01]-L[8-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM13T-P[13-20/0.01]-L[8-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM16-P[16-27/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM16T-P[16-27/0.01]-L[10-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPM20T-P[20-30/0.01]-L[12-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPP5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPP6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPP6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPP8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
HKFTAPP8T-P[8.5-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
Cargando…
Nombre del producto | Característica | Catalogar |
---|---|---|
Pasadores de localización de diámetro pequeño | Pasadores posicionadores de ⌀4 o menos de diámetro adecuados para trabajos pequeños. | Haga clic aquí |
Pasadores de localización para ajuste de altura. | Pines de localización con cabeza corta para placas de PC delgadas. | Haga clic aquí |
Pasadores de localización no magnéticos | Pasadores de localización de aluminio no magnéticos adecuados para entornos donde se debe evitar el magnetismo. | Haga clic aquí |
Pasadores de localización de plástico | Los pasadores de ubicación de plástico evitan daños en el trabajo. | Haga clic aquí |
Pasadores de ajuste de altura | Pasadores de localización adecuados para localizar en dirección vertical. | Haga clic aquí |
Pasadores de soporte | Pasadores para uso en posición más alta para evitar interferencias. | Haga clic aquí |
Forma básica | Cabeza grande | Forma de punta de cabeza | Cónico | Manejar | Ninguno |
---|---|---|---|---|---|
Estilo de varilla | Hilo Femenino |
¿Cómo podemos mejorar?
¿Cómo podemos mejorar?
Si bien no podemos responder directamente a los comentarios señalados en este formulario, se revisará la información con el fin de establecer mejoras a futuro.
Política de Privacidad del Cliente
Gracias por su ayuda.
Si bien no podemos responder directamente a los comentarios señalados en este formulario, se revisará la información con el fin de establecer mejoras a futuro.
Please use el formulario de consulta.
Política de Privacidad del Cliente