(!)Debido al final de soporte anunciado por Microsoft para Internet Explorer 11 con fecha del 15/06/2022, este sitio no recomienda el uso de ese navegador.
Tiene la cabeza de forma típica (cónica) y puede caracterizarse por una baja disponibilidad de costos y una gran cantidad de variaciones.
Número de Parte
Se muestra el número de parte configurado
Material Número | [ M ] Material | [ S ] Tratamiento de superficies | [H] Dureza | Tipo | |
Redondo | (Diamante) | ||||
(1) | Equivalente a la herramienta de acero O1 | — | Dureza tratada: 60 a 63HRC | KFNA | KFND |
(2) | Equivalente a la herramienta de acero O1 | Revestimiento de cromo duro | Dureza: 50 to 55HRC Dureza del enchapado: 750HV ~ | GKFNA | GKFND |
(3) | Equivalente a la herramienta de acero O1 | — | — | BKFNA | — |
(4) | Acero inoxidable 304 | — | — | SKFNA | SKFND |
(5) | Acero inoxidable 304 | Revestimiento de cromo duro | Dureza del enchapado: 750HV ~ | HKFNA | HKFND |
Número de pieza | — | P | — | L | — | B | — | E | — | A | ||||||||
Tipo | Forma | Tol. D | P Tolerancia | D | ||||||||||||||
SKFN | D | G | B | 12 | — | P15.00 | — | L12 | — | B5.0 | — | E7.0 | — | A45 |
D o P | Grado estándar | Grado de precisión | |||||
M | P | G | H | S | A | B | |
m6 | p6 | g6 | h7 | — | — | — | |
3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
18.01 ~ 30.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 |
Número de pieza | P Incremental de 0.01 mm | L Incrementos de 1 mm | B Incrementos de 0.1 mm | E Incrementos de 0.1 mm | A | M (grueso) | (W) | ||||
Tipo | Forma | Tolerancia D | P Tolerancia | D | |||||||
KFN GKFN* BKFN SKFN HKFN* | A (redondo) D (diamante) | M P G H * A * B | S M P G H * A * B | 3 | 3.50 to 8.00 | 0 to 6 | 2.0 to 10.0 | 0.5 to 10.0 | 15 30 45 60 | M 3 | 1.5 |
4 | 4.50 to 8.00 | 0 to 8 | 2.0 to 10.0 | M 4 | 1.8 | ||||||
5 | 5.50 to 8.00 | 0 to 10 | 2.0 to 15.0 (10.0) | M 5 | 2.2 | ||||||
6 | 6.50 to 10.00 | 0 to 10 | 2.0 to 15.0 | M 6 | 3 | ||||||
8 | 8.50 to 15.00 | 0 to 10 | 2.0 to 30.0 (15.0) | M 8 | 3.5 | ||||||
10 | 11.00 to 17.00 | 0 to 15 | 3.0 to 30.0 (25.0) | M10 | 4 | ||||||
12 | 13.00 to 20.00 (18.00) | 0 to 15 | 3.0 to 30.0 (25.0) | M12 | 5 | ||||||
16 | 17.00 to 27.00 | 0 to 20 | 5.0 to 30.0 | M16 | 7 | ||||||
20 | 22.00 to 30.00 | 0 to 20 | 5.0 to 30.0 | M20 | 9 |
D | Tamaños disponibles con forma redonda | Tamaños disponibles con forma de diamante | ||||||||
①Herramienta de acero O1 endurecido KFNA | ②Herramienta de acero O1 duro GKFNA | ③Acero O1 para herramientas BKFNA | ④304 acero inoxidable SKFNA | ⑤Acero inoxidable duro 304 HKFNA | ①Herramienta de acero O1 endurecido KFND | ②Herramienta de acero O1 duro GKFND | ③Acero O1 para herramientas BKFND | ④304 acero inoxidable SKFND | ⑤Acero inoxidable duro 304 HKFND | |
3 | — | |||||||||
4 | — | |||||||||
5 | — | |||||||||
6 | — | |||||||||
8 | — | |||||||||
10 | — | |||||||||
12 | — | |||||||||
16 | — | |||||||||
20 | — |
Los archivos CAD para descarga y la vista previa 3D no están disponibles debido a que el número de parte no ha sido confirmado.
Número de Parte |
---|
KFNDHP3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHP20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDHS20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMA20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMB20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMG20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMH20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM3-P[3.5-8/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMM20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMP20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS3-P[3.5-8/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS4-P[4.5-8/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDMS20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFNDPA20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
Cargando…
Nombre del producto | Característica | Catalogar |
---|---|---|
Pasadores de localización de diámetro pequeño | Pasadores posicionadores de ⌀4 o menos de diámetro adecuados para trabajos pequeños. | Haga clic aquí |
Pasadores de localización para ajuste de altura. | Pines de localización con cabeza corta para placas de PC delgadas. | Haga clic aquí |
Pasadores de localización no magnéticos | Pasadores de localización de aluminio no magnéticos adecuados para entornos donde se debe evitar el magnetismo. | Haga clic aquí |
Pasadores de localización de plástico | Los pasadores de ubicación de plástico evitan daños en el trabajo. | Haga clic aquí |
Pasadores de ajuste de altura | Pasadores de localización adecuados para localizar en dirección vertical. | Haga clic aquí |
Pasadores de soporte | Pasadores para uso en posición más alta para evitar interferencias. | Haga clic aquí |
Forma básica | Cabeza grande | Forma de punta de cabeza | Cónico | Manejar | Ninguno |
---|---|---|---|---|---|
Estilo de varilla | Rosca macho |
¿Cómo podemos mejorar?
¿Cómo podemos mejorar?
Si bien no podemos responder directamente a los comentarios señalados en este formulario, se revisará la información con el fin de establecer mejoras a futuro.
Política de Privacidad del Cliente
Gracias por su ayuda.
Si bien no podemos responder directamente a los comentarios señalados en este formulario, se revisará la información con el fin de establecer mejoras a futuro.
Please use el formulario de consulta.
Política de Privacidad del Cliente