(!)Debido al final de soporte anunciado por Microsoft para Internet Explorer 11 con fecha del 15/06/2022, este sitio no recomienda el uso de ese navegador.
· Punzones de carga pesada: No
· Tipo de vástago: de un solo paso
· Jector: Tipo reforzado con resorte, tipo estándar
· Forma de la punta: Redondo doblemente aplanado, oblongo, rectángulo de radio, rectángulo, redondo
· Material: Equivalente a SKD11 (D2), equivalente a SKH40 (Acero en polvo de alta velocidad)
Para obtener una descripción general completa del producto y detalles sobre los punzones Jector con tratamiento Dicoat (MISUMI), consulte las secciones siguientes:
Número de Parte
Se muestra el número de parte configurado
Los archivos CAD para descarga y la vista previa 3D no están disponibles debido a que el número de parte no ha sido confirmado.
Número de Parte |
---|
T-SJDL13-[50-100/10]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDL13-LC[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDL13-LCT[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDL13-LMT[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDL16-[60-100/10]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDL16-LC[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDL16-LCT[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDL16-LMT[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDL20-[60-100/10]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDL20-LC[35-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDL20-LCT[35-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDL20-LMT[35-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDL25-[60-100/10]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJDL25-LC[35-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJDL25-LCT[35-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJDL25-LMT[35-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJDS4-[40-80/10]-P[1-3.97/0.01]-W[1-3.97/0.01] |
T-SJDS4-LC[35-79.9/0.1]-P[1-3.97/0.01]-W[1-3.97/0.01] |
T-SJDS4-LCT[35-79.9/0.1]-P[1-3.97/0.01]-W[1-3.97/0.01] |
T-SJDS4-LMT[35-79.9/0.1]-P[1-3.97/0.01]-W[1-3.97/0.01] |
T-SJDS5-[40-80/10]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJDS5-LC[35-79.9/0.1]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJDS5-LCT[35-79.9/0.1]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJDS5-LMT[35-79.9/0.1]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJDS6-[40-80/10]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJDS6-LC[35-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJDS6-LCT[35-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJDS6-LMT[35-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJDS8-[40-100/10]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJDS8-LC[35-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJDS8-LCT[35-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJDS8-LMT[35-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJDS10-[40-100/10]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJDS10-LC[35-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJDS10-LCT[35-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJDS10-LMT[35-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJDS13-[40-100/10]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDS13-LC[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDS13-LCT[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDS13-LMT[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJDS16-[40-100/10]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDS16-LC[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDS16-LCT[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDS16-LMT[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJDS20-[40-100/10]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDS20-LC[35-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDS20-LCT[35-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDS20-LMT[35-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJDS25-[40-100/10]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJDS25-LC[35-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJDS25-LCT[35-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJDS25-LMT[35-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01] |
T-SJEL4-[50-80/10]-P[2-3.97/0.01]-W[2-3.97/0.01] |
T-SJEL4-LC[39-79.9/0.1]-P[2-3.97/0.01]-W[2-3.97/0.01] |
T-SJEL4-LCT[39-79.9/0.1]-P[2-3.97/0.01]-W[2-3.97/0.01] |
T-SJEL4-LMT[39-79.9/0.1]-P[2-3.97/0.01]-W[2-3.97/0.01] |
T-SJEL5-[50-80/10]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJEL5-LC[39-79.9/0.1]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJEL5-LCT[39-79.9/0.1]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJEL5-LMT[39-79.9/0.1]-P[2-4.97/0.01]-W[2-4.97/0.01] |
T-SJEL6-[50-80/10]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJEL6-LC[39-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJEL6-LCT[39-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJEL6-LMT[39-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01] |
T-SJEL8-[50-100/10]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJEL8-LC[39-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJEL8-LCT[39-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJEL8-LMT[39-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01] |
T-SJEL10-[50-100/10]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJEL10-LC[39-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJEL10-LCT[39-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJEL10-LMT[39-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01] |
T-SJEL13-[50-100/10]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJEL13-LC[39-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJEL13-LCT[39-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJEL13-LMT[39-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01] |
T-SJEL16-[60-100/10]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJEL16-LC[39-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJEL16-LCT[39-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJEL16-LMT[39-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01] |
T-SJEL20-[60-100/10]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJEL20-[60-100/10]-P[6-19.97/0.01]-WC[5-5.99/0.01] |
T-SJEL20-[60-100/10]-PC[5-5.99/0.01]-W[6-19.97/0.01] |
T-SJEL20-[60-100/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01] |
T-SJEL20-LC[39-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJEL20-LC[39-99.9/0.1]-P[6-19.97/0.01]-WC[5-5.99/0.01] |
T-SJEL20-LC[39-99.9/0.1]-PC[5-5.99/0.01]-W[6-19.97/0.01] |
T-SJEL20-LC[39-99.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01] |
T-SJEL20-LCT[39-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01] |
T-SJEL20-LCT[39-99.9/0.1]-P[6-19.97/0.01]-WC[5-5.99/0.01] |
Cargando…
Golpes de carga pesada | Ninguno | Tipo de vástago | De un solo paso | Tratamiento de superficies | Dicoat |
---|---|---|---|---|---|
Forma de vástago (parte de montaje) | Estándar | T (espesor de la cabeza / espesor de la placa)(mm) | 5 |
¿Cómo podemos mejorar?
¿Cómo podemos mejorar?
Si bien no podemos responder directamente a los comentarios señalados en este formulario, se revisará la información con el fin de establecer mejoras a futuro.
Política de Privacidad del Cliente
Gracias por su ayuda.
Si bien no podemos responder directamente a los comentarios señalados en este formulario, se revisará la información con el fin de establecer mejoras a futuro.
Please use el formulario de consulta.
Política de Privacidad del Cliente