(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Levers（Operation Direction：Horizontal）
| Days to Ship |
|
|---|
-
- Recommendation
Clamp Lever - Threaded, GN300 series, (inches).
JW WINCO
GN 300 Zinc Die-Cast Adjustable Lever With STEEL Components with IMPERIAL TAPPED Thread. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days -
- Recommendation
Clamp Lever - Threaded, GN300 series, metric thread.
GANTER
GN 300 Zinc Die-Cast Adjustable Lever With STEEL Components with METRIC TAPPED Thread. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days -
Clamping Levers - Baked coating finish.
MISUMI
The most generally used Clamp Levers
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Adjustable Lever - Externally threaded, GN300 series (inches).
JW WINCO
GN 300 Zinc Die-Cast Adjustable Lever With STEEL Components with IMPERIAL THREADED Stud. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days -
MISUMI
Serrations can be disengaged easily by pushing the screw head.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Clamp Lever - LDM/LDF/LDR series.
NBK
•Main Body Material: Zinc Alloy
•Main Body Surface Treatment: Powder Coating
•Mounting Section Material: 12L13 Steel
•Mounting Section Surface Treatment: Black Oxide Coating
•Type Clamp: Clamp Mechanism- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
MISUMI
Plastic Type of generally used clamp lever
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
•Main Body Material: Zinc Alloy
•Mounting Section Material: 1045 Carbon Steel
•Type Clamp: Clamp Mechanism
•Operation Direction: Horizontal
•Mounting Section Type: Tapped- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
NBK
•Application: Clamp
•Main Body Material: Nylon
•Mounting Section Material: 12L13 Steel
•Mounting Section Surface Treatment: Black Oxide Coating
•Type Clamp: Clamp Mechanism- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Clamping Lever - Adjustable, male thread, stainless steel internals.
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
· If the lever is released, it returns to meshed status.
· Threaded part can be replaced
· Internal parts are made of stainless steel.
[Applications]
· Clamping lever for adjusting lever position.
· Has a variety of uses including for medical devices and in the chemical industry.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamp Levers - Butterfly type.
MISUMI
•Rotating Radius R (mm): 25
•Main Body Material: Zinc Alloy
•Mounting Section Material: 1045 Carbon Steel
•Type Clamp: Clamp Mechanism
•Operation Direction: Horizontal- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
Flat Tension Levers generally used.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Clamp Lever - Externally threaded, nylon WN300 series, metric thread.
JW WINCO
WN 300 NYLON plastic Adjustable Lever With STEEL Components METRIC THREADED Stud. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days -
Clamping Lever - External thread, GN300 series, metric thread.
GANTER
GN 300 Zinc Die-Cast Adjustable Lever With STEEL Components with METRIC THREADED Stud. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days -
Clamping Lever - Padded or radial tipped.
MISUMI
•Main Body Material: Zinc Alloy
•Mounting Section Material: 12L14 Carbon Steel
•Type Clamp: Clamp Mechanism
•Operation Direction: Horizontal- inCAD Components
Days to Ship: 8 Days or more -
Clamping Lever - Curved type, resin, button head.
MISUMI
•Mounting Section Material: 12L13 Carbon Steel
•Type Clamp: Clamp Mechanism
•Operation Direction: Horizontal- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
MISUMI
Has the ratchet function implemented to facilitate switching of operating directions.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Self-Locking Modules - For cam-type levers, with shaft housing.
HALDER
[Features]
· Clamp effect is the same at any angle; self-locking.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Closing Levers - High voltage.
HALDER
[Features]
· There is a spacer and washer under the cam disk so the lever can easily be rotated to the desired position even if the securing bolt is tightened.
· Left rotation type can also be provided through special order.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamp Lever - Adjustable, male thread, thrust bearing included.
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamp Lever - Threaded, nylon WN300.1 series, metric thread.
JW WINCO
WN300.1 NYLON Plastic Adjustable Lever With STAINLESS STEEL Components with METRIC TAPPED Thread. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days -
Clamp Levers - Stainless steel.
MISUMI
Stainless Steel Type of generally used clamp lever
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
•Rotating Radius R (mm): 45
•Main Body Material: Zinc Alloy
•Main Body Surface Treatment: Baked Paint
•Mounting Section Material: 1045 Carbon Steel
•Type Clamp: Clamp Mechanism- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
MISUMI
Can be used without interfering even if upper space is narrow.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Clamping Lever - Curved type, resin.
MISUMI
Plastic Type of generally used clamp lever
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Clamping Lever - Safety, resin.
MISUMI
Since the lever is in a free state at the home position, it will not become loosened if accidentally turned.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Clamp Levers - Resin, miniature.
MISUMI
•Rotating Radius R (mm): 30
•Mounting Section Material: 12L13 Carbon Steel
•Mounting Section Surface Treatment: Black Oxide Coating
•Type Clamp: Clamp Mechanism
•Operation Direction: Horizontal- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Tension Levers - Straight type, socket for hexagonal key.
MISUMI
•Mounting Section Material: 1045 Carbon Steel
•Type Clamp: Clamp Mechanism
•Operation Direction: Horizontal
•Shape: Knobbed Type
•Knobbed Lever Shape: Ball Knob- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
MISUMI
•Rotating Radius R (mm): 93
•Main Body Material: 1045 Carbon Steel
•Mounting Section Material: 1045 Carbon Steel
•Mounting Section Surface Treatment: Black Oxide Coating
•Type Clamp: Clamp Mechanism- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
MISUMI
Generally used Clamp Levers with Washer.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Plastic Lever - Type T, LUDM/LUDF series.
NBK
•Application: Clamp
•Main Body Material: Nylon
•Mounting Section Material: 12L13 Steel
•Mounting Section Surface Treatment: Black Oxide Coating
•Type Clamp: Clamp Mechanism- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Clamp Lever - Plastic miniature, LECM/LECF series.
NBK
•Application: Clamp
•Rotating Radius R (mm): 30
•Main Body Material: Nylon
•Mounting Section Material: 12L13 Steel
•Mounting Section Surface Treatment: Black Oxide Coating- Volume Discount
Days to Ship: 8 Days or more -
HALDER
[Features]
· Clamp lever position can be freely changed based on selection.
· If the thrust washer is removed, this can be used as an infinitely adjustable stopper.
· Left rotation type can also be provided through special order.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Quick Clamp - Clamping lever included.
HALDER
[Features]
· This quick clamp tights work to the fixed surface while also supporting the work facing down.
· Low profile design and so is suitable for machining the entire surface of the work.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days or more -
Clamping Levers - With threaded or internal bolt.
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamping Levers - With weld type nut.
HALDER
[Features]
· Inexpensive version of DIN99.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamping Levers - Double, welded.
HALDER
[Features]
· Enables operation using both hands.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamping Lever - Adjustable, with threaded screw included.
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamping Lever - With male thread, thrust bearing included, internal parts in stainless steel.
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamping Lever - With female thread.
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamp Lever - Adjustable, internally threaded, with thrust bearing.
HALDER
[Features]
· Clamping lever enabling adjusting the lever position.
· Internal parts are made of stainless steel.
· Has a variety of uses including for medical devices and in the chemical industry.
· When the lever is pulled up the serrations disengage, letting you freely change the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamping Lever - Adjustable, internally threaded, stainless steel.
HALDER
[Features]
· Clamping lever enabling adjusting the lever position.
· Internal parts are made of stainless steel.
· Has a variety of uses including for medical devices and in the chemical industry.
· When the lever is pulled up the serrations disengage, letting you freely change the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
HALDER
[Features]
· Used together with the eccentric lever EH23390 and other parts.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Clamping Lever - Threaded, GN300 series, metric thread.
JW WINCO
GN 300 Zinc Die-Cast Adjustable Lever With STEEL Components with METRIC TAPPED Thread. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days -
Adjustable Lever - Externally threaded, GN300 series, metric thread.
JW WINCO
GN 300 Zinc Die-Cast Adjustable Lever With STEEL Components with METRIC THREADED Stud. Adjustable levers are clamping components that offer a ratcheting feature that is especially useful in tight spaces. Their design also allows for easier visual adjustment to specific positions, and their ergonomic shape makes them user-friendly. They are ideal for situations where more torque is required than can be achieved with a simple knob. Adjustable levers are also referred to as:
adjustable handles, clamping levers, hand levers, adjustable clamping levers, adjustable tension levers, clamp levers, ratchet handles, ratcheting handles, ratcheting levers, spring loaded adjustable levers, and spring loaded levers.- Volume Discount
- CAD ：
- 3D
Days to Ship: 6 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Application |
| Type, Clamp |
| Type, Operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Knobbed Lever Shape |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body, Surface Treatment |
| Mounting Section, Material |
| Mounting Section, Surface Treatment |
| Knob Material |
| Gap Adjustment Screw |
| Mounting Section, Dia. d(φ) |
| Mounting Section, Dia.(in) |
| Mounting Section, Length L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | JW WINCO | GANTER | MISUMI | JW WINCO | MISUMI | NBK | MISUMI | MISUMI | NBK | HALDER | MISUMI | MISUMI | JW WINCO | GANTER | MISUMI | MISUMI | MISUMI | HALDER | HALDER | HALDER | JW WINCO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NBK | NBK | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | JW WINCO | JW WINCO |
| Product Series | Adjustable Lever - Externally threaded, GN300 series (inches). | Clamping Lever - Adjustable, male thread, stainless steel internals. | Clamp Lever - Externally threaded, nylon WN300 series, metric thread. | Clamping Lever - External thread, GN300 series, metric thread. | Self-Locking Modules - For cam-type levers, with shaft housing. | Clamp Lever - Adjustable, male thread, thrust bearing included. | Clamp Lever - Threaded, nylon WN300.1 series, metric thread. | Clamping Lever - With male thread, thrust bearing included, internal parts in stainless steel. | Clamp Lever - Adjustable, internally threaded, with thrust bearing. | Clamping Lever - Adjustable, internally threaded, stainless steel. | Adjustable Lever - Externally threaded, GN300 series, metric thread. | ||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 6 Days | 6 Days |
Same day or more
Show Stock Products | 6 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 10 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 6 Days | 6 Days | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 10 Days | 10 Days | 10 Days | 6 Days |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 10 Days | 10 Days or more | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 6 Days | 6 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||
| Application | Clamp | Clamp | - | Clamp | - | Clamp / Operation | - | - | Clamp | Related Components | - | - | Clamp | Clamp | - | - | - | Clamp | Clamp | Related Components | Clamp | - | - | - | - | - | - | - | - | - | Clamp | Clamp | Clamp | Clamp | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Clamp | Clamp |
| Type, Clamp | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Ratchet Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism |
| Type, Operation | - | - | - | - | - | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operation Direction | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal |
| Shape | L Shape | L Shape | - | L Shape | - | L Shape | - | - | L Shape | Knobbed Type | - | Knobbed Type | L Shape | L Shape | - | - | - | Others | Knobbed Type | Knobbed Type | L Shape | - | - | - | - | - | - | Knobbed Type | Knobbed Type | - | T Shape | L Shape | Knobbed Type | Knobbed Type | Knobbed Type | Knobbed Type | Knobbed Type | Knobbed Type | Knobbed Type | Knobbed Type | Knobbed Type | Knobbed Type | Others | L Shape | L Shape |
| L-Shaped Clamp Lever Shape | - | - | - | - | - | Set Screw Type | - | - | Set Screw Type | - | - | - | - | - | - | - | Set Screw Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Set Screw Type | Set Screw Type | - | Set Screw Type | Set Screw Type | Set Screw Type | Set Screw Type | - | - | - | - | - | - | - |
| Knobbed Lever Shape | - | - | - | - | - | - | - | - | - | Single Lever | - | Ball Knob | - | - | - | - | - | - | Single Lever | - | - | - | - | - | - | - | - | Ball Knob | Ball Knob | - | - | - | Single Lever | Single Lever | Single Lever | Single Lever | Double Lever | Single Lever | - | Single Lever | Single Lever | - | - | - | - |
| Mounting Section Type | Tapped | Tapped | Tapped | Threads | Threads / Tapped | Threads / Tapped / Round Hole | Tapped | Tapped | Threads / Tapped | Threads | Tapped | Tapped | Threads | Threads | - | - | - | Round Hole | Threads | Threads | Tapped | Tapped | - | - | - | - | - | Threads / Tapped | - | - | Threads / Tapped | Threads / Tapped | Threads | Round Hole | Tapped | Tapped | Tapped | Threads | Threads | Tapped | Tapped | Tapped | - | Tapped | Threads |
| Rotating Radius R(mm) | 30 ～ 108 | 30 ～ 108 | 45 ～ 93 | 30 ～ 108 | 45 ～ 63 | 45 ～ 108 | 45 ～ 92 | 30 ～ 42 | 45 ～ 92 | 30 ～ 108 | 25 | 100 ～ 150 | 30 ～ 95 | 30 ～ 108 | 45 ～ 78.5 | 48 ～ 92 | 55 ～ 68 | - | 109 | 62 ～ 108 | 30 ～ 92 | 45 ～ 93 | 45 | 45 | 48 ～ 92 | 44 | 30 | 80 ～ 180 | 93 | 45 ～ 93 | 26 ～ 46.5 | 30 | 109 | - | - | 60 ～ 152 | 47.5 ～ 118 | 30 ～ 108 | 62 ～ 108 | 30 ～ 108 | 62 ～ 108 | 30 ～ 108 | - | 30 ～ 108 | 30 ～ 108 |
| Main Body Material | Zinc Alloy | Zinc Alloy | Zinc Alloy | Zinc Alloy | Stainless Steel / Zinc Alloy | Zinc Alloy | - | Zinc Alloy | Nylon | Zinc Alloy | Zinc Alloy | Steel | Nylon | Zinc Alloy | Zinc Alloy | - | Zinc Alloy | Steel | Steel | Zinc Alloy | Nylon | Stainless Steel / Zinc Alloy | Zinc Alloy | Zinc Alloy | - | - | - | Stainless Steel / Steel | Steel | Zinc Alloy | Nylon | Nylon | Steel | Steel | Steel | Steel | Steel | Zinc Alloy | Zinc Alloy | Zinc Alloy | Zinc Alloy | Zinc Alloy | - | Zinc Alloy | Zinc Alloy |
| Main Body, Surface Treatment | Powder Coating | Powder Coating | Baked Paint | Powder Coating | Buffed Surface | Powder Coating | - | Baked Paint / Chrome Plating | Not Provided | - | - | Black Oxide Coating | Not Provided | Powder Coating | - | - | - | Others | Nickel Plating / Black Oxide Coating | Others | Not Provided | Buffed Surface / Chrome Plating / Nickel Plating | Baked Paint | - | - | - | - | Not Provided | Not Provided | Baked Paint | Not Provided | Not Provided | Nickel Plating / Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | - | Others | Others | Others | - | - | - | - | Powder Coating | Powder Coating |
| Mounting Section, Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Stainless Steel / Steel | Steel | Stainless Steel | - | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel / Steel | - | - | - | - | Steel | Stainless Steel | Steel | Stainless Steel / Steel | Stainless Steel | - | Steel | Steel |
| Mounting Section, Surface Treatment | Black Oxide Coating | Black Oxide Coating | Not Provided / Electroless Nickel Plating | Black Oxide Coating | Not Provided / Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Not Provided / Black Oxide Coating | Black Oxide Coating | - | Not Provided / Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Not Provided | Not Provided / Black Oxide Coating | Black Oxide Coating | - | Electroless Nickel Plating | Black Oxide Coating | Not Provided | Not Provided | Not Provided / Black Oxide Coating | Not Provided / Black Oxide Coating | Not Provided / Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Not Provided | Black Oxide Coating | - | Black Oxide Coating | Black Oxide Coating | Electroless Nickel Plating / Black Oxide Coating | - | - | - | - | Black Oxide Coating | - | Black Oxide Coating | Black Oxide Coating | - | - | Black Oxide Coating | Black Oxide Coating |
| Knob Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ABS Resin Resin | - | - | - | - | - | - | - | - | - | - |
| Gap Adjustment Screw | - | - | - | - | - | Not Provided | - | - | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section, Dia. d(φ) | - | 4 ～ 16 | 4 ～ 12 | - | 4 ～ 8 | 3 ～ 16 | 4 ～ 12 | 4 ～ 8 | 3 ～ 12 | 4 ～ 16 | 4 ～ 6 | 8 ～ 16 | 4 ～ 12 | 4 ～ 16 | 5 ～ 10 | 4 ～ 12 | 5 ～ 10 | 8 ～ 12 | 10 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 8 ～ 16 | 10 ～ 16 | 6 ～ 12 | 3 ～ 12 | 3 ～ 6 | 10 | 8 ～ 12 | 8 ～ 20 | 8 ～ 20 | 8 ～ 20 | 4 ～ 16 | 6 ～ 12 | 3 ～ 16 | 6 ～ 12 | 3 ～ 16 | 8 ～ 12 | 4 ～ 16 | 4 ～ 16 |
| Mounting Section, Dia.(in) | 0.1875" (10-32) ～ 0.625" (5/8-11) | - | - | 0.1875" (10-32) ～ 0.625" (5/8-11) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section, Length L(mm) | - | - | 7 ～ 63 | 10 ～ 63 | 7 ～ 40 | 6 ～ 80 | 8 ～ 50 | 7 ～ 32 | 6 ～ 80 | 12 ～ 80 | 7 ～ 32 | 30 ～ 63 | 10 ～ 80 | 12 ～ 120 | 12 ～ 40 | 12 ～ 50 | 16 ～ 50 | - | - | 20 ～ 85 | - | 7 ～ 50 | 12 ～ 32 | 12 ～ 32 | 12 ～ 50 | 12 ～ 32 | 12 ～ 40 | 30 ～ 60 | 30 ～ 60 | 12 ～ 50 | 6 ～ 80 | 6 ～ 50 | - | 132 ～ 190 | - | 63 ～ 160 | - | 12 ～ 80 | 20 ～ 85 | 8 ～ 22 | 12.5 ～ 26.5 | - | 14 ～ 31 | - | 12 ～ 120 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Application
- Clamp
- Operation
- Related Components
-
Type, Clamp
-
Type, Operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Knobbed Lever Shape
-
Mounting Section Type
- Threads
- Tapped
- Round Hole
-
Metric / Inch
- metric
- inch
-
Rotating Radius R(mm)
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Nylon
-
Main Body, Surface Treatment
-
Mounting Section, Material
-
Mounting Section, Surface Treatment
-
Knob Material
-
Gap Adjustment Screw
-
Mounting Section, Dia. d(φ)
-
Mounting Section, Dia.(in)
-
Mounting Section, Length L(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Levers
-
- Door Catches
- Door & Drawer Handles
- Fasteners, Draw Latches
- Door Wheels
- Latch Handles, Locks, Keys
- Grip Handles
- Gas Springs
- Hand Wheels & Crank Handles
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hanger Hooks
- Hanging & Mounting Hardware
- Knobs & Screws
- Levers
- Lid & Flap Stays
- Hinges
- Telescopic Slide Rails
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy