(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Leveling Mounts（Type：Precision Instrument Type）
Adjusters are parts that use the properties of screws to enable height alignment in tools such as work benches and machine tools. A number of different adjuster types are available, such as the standard adjusting bolt type and mount type. Another example is the swivel-head type, which comes with an angle-adjustment feature that enables level installation of equipment on floors with non-level surfaces or the like. Adjusters are usually made of steel or stainless steel. There are types that also use various other materials such as conductive rubber or non-migrating rubber on the bottom surface to provide properties such as resistance to oil, impacts or vibrations. The proper type for the operating environment should be selected.
| Days to Ship |
|
|---|
-
Nabeya
Allowable loads for the models are G1: 25kN, G2: 45kN, G3: 70kN. Maximum height of 5-6 mm. It has excellent rigidity and the displacement is short. Applications are: level adjustment for various machine tools, testing machines.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
the Anti-Vibration Wedge Mount (Type C)
Nabeya
•Type : Precision Instrument Type
•Body Material : FC250
For complete product overview and details on the Anti-Vibration Wedge Mount (Type C) see the sections below:- Volume Discount
- CAD ：
- 2D
Days to Ship: 16 Days or more -
Nabeya
Allowable loads are T2: 25kN, T4: 40kN, T6: 60kN. Permissible lift 3-4 mm. Counterclockwise rotation for lifting. Excellent rigidity and low load displacement.
- Volume Discount
Days to Ship: 8 Days or more -
Leveling Blocks - Wedge type, anti-vibration, type D.
Nabeya
Precise level adjustment mechanism and large adjustment stroke. Body material FC250, anti-vibration plate material NBR, anti-slip plate BR7-1, bottom plate B5. Can be used when it is not necessary to fix to the machine.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Leveling Blocks - Wedge type, anti-vibration, type A.
Nabeya
Independent wedge support with anti-vibration function. Precise level adjustment mechanism and large adjustment stroke.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Leveling Blocks - Wedge type, anti-vibration, type B.
Nabeya
Independent wedge support with anti-vibration function. Precise level adjustment mechanism and large adjustment stroke.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Nabeya
Allowable loads are C1: 7kN, C2: 15kN, C3: 25kN, C4: 45kN. Allowable uplift of 4-6 mm. The equipment can be fixed with anchor bolts, excellent rigidity and low load displacement.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Nabeya
Allowable loads for the models are H0: 30kN, H1: 50kN. Lift of 2.5 - 3 mm. Excellent rigidity and short displacement. Applications are: level adjustment for various machine tools, testing machines.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Anti-Vibration Wedge Mount PKDK (Bolt Through Type with A Spherical Surface)
Nabeya
•Type : Precision Instrument Type
•Body Material : FC250
For complete product overview and details on Anti-Vibration Wedge Mount PKDK (Bolt thru Type with A Spherical Surface) see the sections below:- Volume Discount
- CAD ：
- 2D
Days to Ship: 16 Days or more -
Anti-Vibration Wedge Mount (F Model)
Nabeya
•Type : Precision Instrument Type
•Body Material : FC250
For complete product overview and details on Anti-Vibration Wedge Mount (F Model) see the sections below:- Volume Discount
- CAD ：
- 2D
Days to Ship: 16 Days or more -
Nabeya
Possibility of leveling 0.1 mm of heavy workpieces. By turning the adjusting screw, it is possible to precisely adjust the height without moving sideways.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Nabeya
Permissible load 3.5 kN, 4 mm lift. Can be used horizontally or upside down. Comes with a side cover to prevent wear on the workpieces. Ideal for centering the work and avoiding vibrations during cutting. Suitable for level adjustment of machines and devices.
- Volume Discount
Days to Ship: 8 Days or more -
Nabeya
Allowable loads are NU12T: 40kN, NU38T: 100kN. Permissible lift 7-10 mm. With lifting pivot. The pivot absorbs the inclination of the machine and the base up to a maximum of 3 degrees.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Nabeya
Permissible loads are U3:15 kN, U9:50 kN, U13:75 kN. Counterclockwise rotation.
- Volume Discount
Days to Ship: 9 Days or more -
Leveling Blocks - Wedge type, anti-vibration, PKA type.
Nabeya
Equipped with a precise level adjustment mechanism, large adjustment stroke and anti-vibration function. It can be used for die casting machines, injection molding machines, impact testers, etc., where the vibrations and shocks generated by the machines are particularly large.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 16 Days or more -
Nabeya
Allowable loads are A1: 7kN, A2: 15kN, A3: 25kN, A4: 45kN. Allowable elevation of 4 - 6 mm. Compared to a leveler, the level adjustment is more precise. Excellent rigidity and displacement due to low load.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Nabeya
Allowable loads are BW10: 100kN, BW20: 200kN, BW30: 300kN, BW60: 600kN, BW100: 1000kN. Allowable lift of 5-6 mm. Ideal for leveling heavy objects. Made of heavy-duty ductile cast iron and thrust roller bearings. With a grease nipple on the side, prevents the sliding surface from running out of grease and allows smooth operation.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Nabeya
Allowable loads are B1: 5kN, B2: 10kN, B3: 15kN, B3T: 15kN. Allowable uplift of 4 - 5 mm. The overall height and width are small, making it ideal when space is limited. Economical because components are factory made in 2 pieces without top plate.
- Volume Discount
Days to Ship: 8 Days or more -
Nabeya
Allowable load of 15kN, 2.5 mm lift. Fine screws are used for the adjusting screws, which facilitates fine adjustments. Rotate counterclockwise to lift. Excellent rigidity and load displacement.
- Volume Discount
Days to Ship: 10 Days or more -
Leveling Blocks - For remote operation, type UJ.
Nabeya
They can be installed under a surface plate and the level can be adjusted by remote control. The remote control handle is equipped with a universal joint. After using the handle out of the load, it can be disassembled and stored.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Nabeya
Allowable loads are AN1: 7kN, AN2: 15kN, AN3: 25kN, AN4: 45kN. Allowable lift 4 - 6 mm.
- Volume Discount
Days to Ship: 9 Days or more -
Nabeya
The allowable load is 20kN and 6mm lift. Compact, lightweight, low height leveling block. Anti-skid nitrile rubber attached to the upper surface. Used to adjust the level of machines.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Adjusting Bolt Shape Type |
| Swivel Angle θ(deg) |
| Mounting Shape Type |
| Height Adjusting Handle |
| Thread Portion Material |
| Thread Surface Treatment |
| Body Material |
| Main Body Surface Treatment |
| Bottom Rubber Material |
| Thread Length L1(mm) |
| Main Body Height h(mm) |
| Thread Size M(mm) |
| Properties |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya |
| Product Series | Anti-Vibration Wedge Mount PKDK (Bolt Through Type with A Spherical Surface) | |||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 9 Days or more | 16 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 16 Days or more | 16 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 16 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 13 Days or more | 9 Days or more | 9 Days or more |
| Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type |
| Adjusting Bolt Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Portion Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Body Material | - | Cast Iron | - | Cast Iron | Cast Iron | Cast Iron | - | - | Cast Iron | Cast Iron | Steel | - | Cast Iron | - | Cast Iron | - | Cast Iron | - | - | - | - | Others |
| Main Body Surface Treatment | - | Coating | - | Coating | Coating | Coating | - | - | Coating | Coating | Black Oxide Coating | - | - | - | Coating | - | - | - | - | - | - | - |
| Bottom Rubber Material | - | Nitrile Rubber | - | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | - | - | Nitrile Rubber | Nitrile Rubber | - | - | - | - | Nitrile Rubber | - | - | - | - | - | - | Nitrile Rubber |
| Thread Length L1(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Height h(mm) | 85.5 ～ 112 | 200 | 64.5 ～ 121 | 55 ～ 200 | 55 ～ 400 | 55 ～ 400 | 66 ～ 105 | 65 ～ 94 | 73 | 95 | 50 ～ 170 | 50 | 77 ～ 110 | 70.5 ～ 101.5 | 79 ～ 80 | 66 ～ 101 | 150 ～ 225 | 48.5 ～ 71 | 65.5 | 95 ～ 165 | 80 ～ 101 | 32.5 ～ 35.5 |
| Thread Size M(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Properties | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Standard | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Standard | Standard | Standard | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Swivel Mechanism | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
-
Adjusting Bolt Type
-
Mounting Type
-
Precision Instrument Type
-
With Automatic HeightAdjusting Function
-
Others
- Adjusting Screw with Rubber Grommet
-
Adjusting Bolt Type
-
Adjusting Bolt Shape Type
-
Metric / Inch
- metric
-
Swivel Angle θ(deg)
-
Mounting Shape Type
-
Height Adjusting Handle
-
Thread Portion Material
-
Thread Surface Treatment
-
Body Material
-
Main Body Surface Treatment
-
Bottom Rubber Material
-
Thread Length L1(mm)
- 5
- 7
- 9
- 11
- 13.5
- 14
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 28
- 30
- 31
- 32
- 34
- 35
- 36
- 38
- 40
- 42
- 45
- 50
- 52
- 60
- 63
- 65
- 66
- 70
- 71
- 75
- 80
- 85
- 90
- 91
- 100
- 114
- 120
- 125
- 130
- 150
- 154
- 157
- 170
- 180
- 184
- 200
- 207
-
Main Body Height h(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 10
- 10.5
- 11
- 11.2
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- ~ 14
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- ~ 18
- 18.5
- 19
- 20
- 21
- 21.5
- 22
- ~ 22
- 22.5
- 23
- 24
- 24.5
- 25
- 26
- ~ 26
- 27
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31.5
- 32
- ~ 32
- 32.5
- 33
- 33.2
- 35.4
- 35.5
- 36.5
- 37
- 39
- 40
- 41
- ~ 42
- 42.5
- 44
- 44.5
- 45
- ~ 45
- 46.5
- 48.5
- 50
- 54
- 55
- 55.5
- 60.5
- 63
- 64.5
- 65
- 65.5
- 66
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 79
- 80
- 85
- 85.5
- 91
- 94
- 95
- 100
- 101
- 101.5
- 105
- 110
- 112
- 115
- 121
- 125
- 142
- 150
- 153
- 160
- 165
- 170
- 175
- 200
- 225
- 400
-
Thread Size M(mm)
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistant
- Electrical Conductivity
-
Swivel Mechanism
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- Nabeya (22)
- Gifu Sanken (0)
- HALDER (0)
- Nanshin (0)
- Sun Fastener (0)
- NBK (0)
- Daiwa Rashi (0)
- Takigen (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy