(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Linear Ball Bushings（Outer Cylinder Surface Finish：Plated）
TYPE
-
Straight -
Flange -
Housings -
Related Components -
Standard Flange -
Center Flange -
Pilot Flange
-
- On Sale Till 07/03/2025
Linear Ball Bushings - Flanged, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - Flanged, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - Single Type. LMU/SLMU Series.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
The most standard type in linear ball bushing products.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Bearing type, wide block, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to be tightly secured to a workpiece through four mounting holes.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - With pilot flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - Bearing type, double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
The compact type is Max. 6mm lower in height (H dimension) and Max. 3mm smaller in width (W dimension) than the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - With pilot flange, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - Center flange, double, long type.
MISUMI
A load can be placed near the center of the linear bushing to evenly distribute the load and space.
- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Bearing type, wide block, with clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
- On Sale Till 07/03/2025
Linear Ball Bushings - Bearing Type, Wide Block, Long/Extra Long.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to be tightly secured to a workpiece through four mounting holes.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, simple, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - Flanged, double. LHF Series.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Double, special length.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - With central flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
A load can be placed near the center of the linear bushing to evenly distribute the load and space.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With lubrication holes, simple. L-OH Series.
Ozak Seiko
Standard type ball bushing with lubrication holes that allow for easier and more constant lubricant replenishment, which will improve its performance and life time. Available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel. Ideal bushing if cost savings in maintenance are required.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 14 Days or more -
Linear Ball Bushings - Bearing type, wide block, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Bearing type, single/double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. Height of Mounting Surface ~ Shaft Center is selectable.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - With round flange, double (economy model). LFDM Series.
Ozak Seiko
Double linear bushing with circular flange for easy assembly due to its bolt-on design. Bushings available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
- Volume Discount
Days to Ship: 14 Days or more -
Linear Ball Bushings - Bearing type, high block, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Bearing type, high block, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to have a width (W Dim.) narrower than Wide Block.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - With flange and clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Flanged, single, with MX lubrication unit.
MISUMI
Automatic Lubrication drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more Show Stock Products
-
- On Sale Till 07/03/2025
Linear Ball Bushings - Standard/pilot flanged, double, long type.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Bolt-on flange offers assembly convenience. The Long, Pilot Type is designed in such a way that the linear bushing does not protrude toward the opposite side of the linear bushing mount side, and retains a sufficient space on the opposite side.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Bearing type, high block, with Dowel pin holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Dowel Hole Type requires less time for assembly and has better repeatability.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Bearing type, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
The compact type is Max. 6mm lower in height (H dimension) and Max. 3mm smaller in width (W dimension) than the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Bearing type, wide block, with Dowel pin holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Dowel Hole Type requires less time for assembly and has better repeatability.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Compact, double bearing type. CHW Series.
Ozak Seiko
Double ball bushing incorporating a compact aluminum housing for a more space-saving machine design. The housing facilitates mounting of a plate from the top or side of the bushing. Bushings available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 14 Days or more -
Linear Ball Bushings - Flanged, double, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
- On Sale Till 07/03/2025
Linear Ball Bushings - Flanged, double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, single, with lubrication unit.
MISUMI
Standard length ball bushing, with configurable pilot flange (circular, square or compact) that facilitates its assembly thanks to the fact that it can be screwed on. With automatic lubrication thanks to the integrated lubrication unit. Significantly extends maintenance periods for the bushing, which translates into cost reduction and time savings. Available in carbon steel or stainless steel (both hardened).
- Volume Discount
- METRIC
Days to Ship: 8 Days or more Show Stock Products
-
Linear Ball Bushings - With central flange type T, double. LFDTC Series.
Ozak Seiko
Double linear bushing with T-type flange that allows a load to be placed near the center of the linear bushing to evenly distribute the load and space. Please note that the number of mounting holes may change depending on the bushing size (from 2 to 4 holes). Available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
- Volume Discount
Days to Ship: 13 Days or more -
Linear Ball Bushings - With square flange, long type, aluminum body. LFWL Series.
Ozak Seiko
Long linear bushing that integrates two single linear bushings inside its aluminum body and adds a square flange that facilitates its assembly thanks to its bolt-on design. This bushing is ideal when it is required to lighten the weight of the structure or application mechanism. It is lubricated by means of a grease fitting included with the bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Linear Ball Bushings - With square pilot flange, long type, aluminum body. LFWLB Series.
Ozak Seiko
Long linear bushing that integrates two single linear bushings inside its aluminum body and adds a square pilot flange which is not completely at the end of the bushing, leaving enough space to mount from the opposite side of the installation. This bushing is ideal when it is required to lighten the weight of the structure or application mechanism. Lubrication is by means of a grease fitting included with the bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Linear Ball Bushings - Compact, single bearing type. CH Series.
Ozak Seiko
Single ball bushing incorporating a compact aluminum housing for a more space-saving machine design. The housing facilitates mounting of a plate from the top or side of the bushing. Bushing available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| TYPE |
| Motion |
| Style |
| Outer Cylinder Material |
| Outer Cylinder Surface Finish |
| For Shaft Size(mm) |
| For Shaft Size(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Flange Type |
| Lubrication Type |
| O.D. D(mm) |
| O.D. D(inch) |
| Type |
| Length |
| Ball Recirculating Type |
| Precision |
| Eccentricity(µm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Ozak Seiko | MISUMI | MISUMI | Ozak Seiko | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Ozak Seiko | MISUMI | MISUMI | MISUMI | Ozak Seiko | Ozak Seiko | Ozak Seiko | Ozak Seiko |
| Product Series | Linear Ball Bushings - Bearing type, wide block, with clamping lever. | Linear Ball Bushings - Bearing Type, Wide Block, Long/Extra Long. | Linear Ball Bushings - With lubrication holes, simple. L-OH Series. | Linear Ball Bushings - Bearing type, wide block, with MX lubrication unit. | Linear Ball Bushings - With round flange, double (economy model). LFDM Series. | Linear Ball Bushings - Bearing type, high block, with MX lubrication unit. | Linear Ball Bushings - Flanged, single, with MX lubrication unit. | Linear Ball Bushings - Standard/pilot flanged, double, long type. | Linear Ball Bushings - Bearing type, high block, with Dowel pin holes. | Linear Ball Bushings - Bearing type, wide block, with Dowel pin holes. | Linear Ball Bushings - Compact, double bearing type. CHW Series. | Linear Ball Bushings - Flanged, double, with MX lubrication unit. | Linear Ball Bushings - Flanged, single, with lubrication unit. | Linear Ball Bushings - With central flange type T, double. LFDTC Series. | Linear Ball Bushings - With square flange, long type, aluminum body. LFWL Series. | Linear Ball Bushings - With square pilot flange, long type, aluminum body. LFWLB Series. | Linear Ball Bushings - Compact, single bearing type. CH Series. | |||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products |
Same day or more
Show Stock Products | 14 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 14 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
8 Days or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 14 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products | 13 Days or more | 13 Days or more | 13 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
| TYPE | Flange | Flange | Straight | Housings | Flange | Housings | Flange | Flange | Housings | Housings | Flange | Flange | Straight | Flange | Straight | Housings | Housings | Flange | Housings | Housings | Flange | Flange | Flange | Housings | Housings | Housings | Housings | Flange | Flange | Flange | Flange | Flange | Flange | Housings |
| Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
| Style | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Outer Cylinder Material | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Aluminum | Steel | Steel | Steel | Steel | Aluminum | Aluminum | Aluminum |
| Outer Cylinder Surface Finish | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated | Plated |
| For Shaft Size(mm) | 6 ～ 50 | 6 ～ 50 | 3 ～ 50 | 5 ～ 50 | 6 ～ 50 | 4 ～ 30 | 6 ～ 50 | 6 ～ 40 | 16 ～ 30 | 5 ～ 50 | 6 ～ 16 | 6 ～ 30 | 6 ～ 30 | 6 ～ 50 | 6 ～ 50 | 10 ～ 50 | 12 ～ 30 | 16 ～ 60 | 10 ～ 30 | 6 ～ 30 | 16 ～ 30 | 10 ～ 50 | 6 ～ 40 | 8 ～ 30 | 4 ～ 30 | 10 ～ 50 | 6 ～ 40 | 10 ～ 50 | 6 ～ 16 | 10 ～ 50 | 6 ～ 40 | 16 ～ 40 | 16 ～ 40 | 6 ～ 40 |
| For Shaft Size(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length L(mm) | 19 ～ 100 | 35 ～ 192 | 10 ～ 192 | 18 ～ 110 | 35 ～ 192 | 27 ～ 138 | 19 ～ 100 | 49 ～ 230 | 59 ～ 158 | 33 ～ 215 | 19 ～ 37 | 29 ～ 90 | 29 ～ 90 | 35 ～ 192 | 19 ～ 100 | 45 ～ 243 | 40 ～ 138 | 68 ～ 209 | 45 ～ 156 | 37 ～ 202 | 37 ～ 123 | 39 ～ 128 | 49 ～ 230 | 32 ～ 202 | 15 ～ 74 | 35 ～ 310 | 46 ～ 176 | 65 ～ 220 | 35 ～ 70 | 39 ～ 128 | 35 ～ 153 | 150 ～ 300 | 150 ～ 300 | 26 ～ 96 |
| Overall Length L(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Flange Type | Standard Flange | Standard Flange | - | - | Pilot Flanged | - | Pilot Flanged | Pilot Flanged | - | - | Standard Flange | Standard Flange | - | Standard Flange / Center Flanged | - | - | - | Standard Flange | - | - | Standard Flange | Standard Flange | Pilot Flanged | - | - | - | - | Standard Flange | Standard Flange | Standard Flange | Center Flanged | Standard Flange | Pilot Flanged | - |
| Lubrication Type | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | With Lubrication Unit MX | Standard | Standard | With Lubrication Unit MX | Standard | Standard | With Lubrication Unit MX | Standard | Standard | Standard | Standard | Standard | With Lubrication Unit MX | Standard | With Lubrication Unit MX | Standard | Standard | Standard | Standard |
| O.D. D(mm) | 12 ～ 80 | 12 ～ 80 | 7 ～ 80 | 10 ～ 80 | 12 ～ 80 | 8 ～ 45 | 12 ～ 80 | 15 ～ 65 | 28 ～ 45 | 10 ～ 80 | 10 ～ 26 | 12 ～ 45 | 12 ～ 45 | 12 ～ 80 | 12 ～ 80 | 19 ～ 80 | 21 ～ 45 | 28 ～ 90 | 19 ～ 45 | 12 ～ 45 | 28 ～ 45 | 19 ～ 80 | 15 ～ 65 | 15 ～ 45 | 8 ～ 45 | 19 ～ 80 | - | 19 ～ 80 | 10 ～ 26 | 19 ～ 80 | 12 ～ 60 | 42 ～ 84 | 42 ～ 84 | - |
| O.D. D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | with End Flange | with End Flange | Standard | Pillow Blocks Wide Block Type | - | Housing Type | - | - | Pillow Blocks Wide Block Type | Pillow Blocks Wide Block Type | with End Flange | with End Flange | Standard | - | Standard | Pillow Blocks Wide Block Type | Shaft-Sliding Linear Bushing Pillow Blocks | with End Flange | Housing Type | Housing Type | with End Flange | with End Flange | with End Flange | Housing Type | Housing Type | Pillow Blocks Wide Block Type | Housing Type | with End Flange | with End Flange | with End Flange | with Center Flange | with End Flange | with Pilot, End Flange | Housing Type |
| Length | Standard | - | Standard | Standard / Medium | - | Double | Standard | - | Standard / Double | Double / Medium Long / Long | Standard | - | - | - | Standard | Standard / Double | Standard / Double | Double | Standard / Double | Medium / Medium Long / Long | Standard / Double | Standard | - | Standard / Double / Long | Standard | Standard / Double / Long | Short | - | Double | Standard | Double | Long | Long | Short |
| Ball Recirculating Type | Single | Double | Single / Double | Single / Double | Double | Double | Single | Double | Single / Double | Double | Single | Double | Double | Double | Single | Single / Double | Single / Double | Double | Single / Double | Double | Single / Double | Single | Double | Single / Double | Single | Single / Double | Double | Double | Double | Single | Double | Double | Double | Single |
| Precision | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade |
| Eccentricity(µm) | 12 ～ 20 | 15 ～ 25 | 8 ～ 25 | - | 15 ～ 25 | - | 12 ～ 20 | 20 ～ 30 | - | - | 12 | 15 ～ 20 | 15 ～ 20 | 15 ～ 25 | - | - | - | - | - | - | 12 ～ 20 | 12 ～ 20 | 20 ～ 30 | - | - | - | - | 15 ～ 25 | 15 | 12 ～ 20 | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Motion
-
Style
-
Standard -
Open
-
-
Outer Cylinder Material
- Steel
- Stainless Steel
- Aluminum
-
Outer Cylinder Surface Finish
- None
- Plated
-
Metric / Inch
- metric
-
For Shaft Size(mm)
-
For Shaft Size(inch)
-
Overall Length L(mm)
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 19
- 20
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
- 33
- 35
- 36
- 37
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 90
- 91
- 92
- 93
- 94
- 96
- 97
- 99
- 100
- 102
- 103
- 104
- 105
- 106
- 109
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 122
- 123
- 125
- 128
- 130
- 132
- 134
- 135
- 136
- 138
- 140
- 143
- 144
- 145
- 148
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 160
- 165
- 167
- 170
- 175
- 176
- 177
- 184
- 185
- 187
- 192
- 199
- 200
- 202
- 209
- 211
- 215
- 220
- 230
- 243
- 250
- 300
- 310
-
Overall Length L(inch)
- 0.56 in (9/16")
- 0.75 in (3/4")
- 0.750 in (3/4")
- 0.875 in (7/8")
- 1.19 in
- 1.25 in (1-1/4")
- 1.250 in (1-1/4")
- 1.31 in (1-5/16")
- 1.375 in (1-3/8")
- 1.50 in (1-1/2")
- 1.500 in (1-1/2")
- 1.594 in (1-19/32")
- 1.625 in (1-5/8")
- 1.69 in
- 1.75 in (1-3/4")
- 1.875 in (1-7/8")
- 1.94 in
- 2.06 in
- 2.25 in (2-1/4")
- 2.250 in (2-1/4")
- 2.375 in (2-3/8")
- 2.625 in (2-5/8")
- 2.81 in
- 2.813 in (2-13/16")
- 2.88 in
- 3.00 in (3")
- 3.000 in (3")
- 3.094 in (3-3/32")
- 3.20 in
- 3.38 in
- 3.50 in (3-1/2")
- 3.63 in (3-5/8")
- 3.75 in (3-3/4")
- 3.95 in
- 4.00 in (4")
- 4.281 in (4-9/32")
- 4.50 in (4-1/2")
- 4.75 in (4-3/4")
- 5.00 in (5")
- 5.000 in (5")
- 5.33 in
- 5.688 in (5-11/16")
- 6.00 in (6")
- 7.50 in (7-1/2")
- 8.00 in (8")
- 9.00 in (9")
-
Flange Type
-
Standard Flange -
Center Flanged -
Pilot Flanged
-
-
Lubrication Type
- Standard
- Grease coating
- With Lubrication Unit MX
-
O.D. D(mm)
-
O.D. D(inch)
-
Type
-
Length
-
Ball Recirculating Type
-
Precision
-
Eccentricity(µm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 8 Days or Less
- 9 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
- 15 Days or Less
- 16 Days or Less
Related Categories to Linear Ball Bushings
-
- Ball Guides
- Ball Screws
- Ball Screw Support Units
- Oil Free Bushings, Washers
- Oil Free Plates, Guide Rails
- Linear Guides
- Linear Ball Bushings
- Cable Carriers
- Linear Shafts
- Lead Screws, Slide Screws
- Other Linear Motion Components
- Cross Roller
- Linear Rails, V Guides, Oil Free Guides Units
- Shaft Collars
- Actuators
- Shaft Supports
- Spline Shafts
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy