(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Linear Ball Bushings - With pilot flange, single compact, reamed mounting holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Flanged, single, with lubrication unit.
MISUMI
Standard length ball bushing, with configurable pilot flange (circular, square or compact) that facilitates its assembly thanks to the fact that it can be screwed on. With automatic lubrication thanks to the integrated lubrication unit. Significantly extends maintenance periods for the bushing, which translates into cost reduction and time savings. Available in carbon steel or stainless steel (both hardened).
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Flanged, double, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Bearing type, high block, with clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Bearing type, wide block, with clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Bearing type, wide block, with Dowel pin holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Dowel Hole Type requires less time for assembly and has better repeatability.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - With flange and clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Flanged, single (Inches).
MISUMI
Single ball bushings with configurable flange shape (circular, square or compact) with selectable dimensions in inches. Available in hardened carbon steel.
Days to Ship: | 5 Days or more |
---|
Linear Ball Bushings - Center Flanged, Double (Inches).
MISUMI
Double bushings with selectable dimensions in inches. Adds a configurable center flange shape (circular, square or compact) that allows a load to be placed near the center of the linear bushing to evenly distribute the load and space. Available in hardened carbon steel.
Days to Ship: | 26 Days or more |
---|
Linear Ball Bushings - With central flange, double. LMC-L Series.
THK
[Features]
· Linear bushing of center flange type.
· Available in 3 types, round, rectangular and round chamfered. Each of these is also available as a long type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Single (economy model). LM Series.
Ozak Seiko
It is the most common single bushing, with configurable dimensions in millimeters. Available in hardened carbon steel with or without dust seals. The economical series is ideal for cost reduction.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Pilot flanged, single, with MX lubrication unit.
MISUMI
Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
The compact type is Max. 6mm lower in height (H dimension) and Max. 3mm smaller in width (W dimension) than the Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Linear/Rotating, single or double.
MISUMI
Capable of rotary motion, finite linear motion, and the combination of both.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Flanged, double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Flanged, double (Inches).
MISUMI
Double flanged ball bushings with configurable shape (circular, square or compact) with selectable dimensions in inches. Available in hardened carbon steel.
Days to Ship: | 29 Days or more |
---|
Linear Ball Bushings - Linear/Rotating, flanged.
MISUMI
•TYPE: Flange
•Motion: Linear/Rotary
•Style: Standard
•Outer Cylinder Material: 52100 Bearing Steel Equivalent
•Flange Type: Standard Flange
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - With square flange, stainless steel, long. LMK-ML series.
THK
Type with LMF-L type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Compact, single bearing type. SH series.
THK
Case unit is based on LM case unit SC-type with standard linear bushing embedded in small lightweight aluminum case. Compared to the SC type, this type is more suited for compact designs. Any mounting direction is acceptable and lifetime performance is enhanced due to 2 races of load-bearing balls on the case upper face.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Miniature, single. LMS Series.
IKO
Because its miniature size, it is possible to design compact machines and mechanisms. Available in carbon steel and stainless steel. This model does not have the option of dust seals.
Days to Ship: | 11 Days or more |
---|
Linear Ball Bushings - With central flange type T, double. LFDTC Series.
Ozak Seiko
Double linear bushing with T-type flange that allows a load to be placed near the center of the linear bushing to evenly distribute the load and space. Please note that the number of mounting holes may change depending on the bushing size (from 2 to 4 holes). Available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
Days to Ship: | 13 Days or more |
---|
Spacers - For linear ball bushings.
MISUMI
Spacers for Linear Bushing installation.
Days to Ship: | 9 Days or more |
---|
Linear Ball Bushings - Single/Double, with MX lubrication unit.
MISUMI
Electroless Ni-plated types are added as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Flanged, single, with MX lubrication unit.
MISUMI
Automatic Lubrication drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Double, special length.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, high block, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to have a width (W Dim.) narrower than Wide Block.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - With pilot flange, double compact, reamed mounting holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Double (Inches). U-LMUW Series.
MISUMI
Double ball bushing, longer than the single bushing. With selectable dimensions in inches. Available in hardened carbon steel.
Days to Ship: | 29 Days or more |
---|
Linear Ball Bushings - With light square flange. LMJK/LMJK-L Series.
THK
[Features]
· Uses high-strength reinforced plastic in flange portion to achieve a reduction in weight compared with the conventional metal flange type (maximum 25%)
· Contributes to weight reduction when mounted to movable parts.
· Reasonable price realized by replacing the metal of the reasonably priced flange with high-strength plastic.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - With lubrication holes, simple. L-OH Series.
Ozak Seiko
Standard type ball bushing with lubrication holes that allow for easier and more constant lubricant replenishment, which will improve its performance and life time. Available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel. Ideal bushing if cost savings in maintenance are required.
Days to Ship: | 12 Days or more |
---|
Linear Ball Bushings - With round flange, double (economy model). LFDM Series.
Ozak Seiko
Double linear bushing with circular flange for easy assembly due to its bolt-on design. Bushings available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
TYPE |
Motion |
Style |
Outer Cylinder Material |
Outer Cylinder Surface Finish |
For Shaft Size(mm) |
For Shaft Size(inch) |
Overall Length L(mm) |
Overall Length L(inch) |
Flange Type |
Lubrication Type |
O.D. D(mm) |
O.D. D(inch) |
Type |
Length |
Ball Recirculating Type |
Precision |
Eccentricity(µm) |
| |||||||||||||||||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | Ozak Seiko | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | IKO | Ozak Seiko | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | Ozak Seiko | Ozak Seiko |
Product Series | Linear Ball Bushings - With pilot flange, single compact, reamed mounting holes. | Linear Ball Bushings - Flanged, single, with lubrication unit. | Linear Ball Bushings - Flanged, double, with MX lubrication unit. | Linear Ball Bushings - Bearing type, high block, with clamping lever. | Linear Ball Bushings - Bearing type, wide block, with clamping lever. | Linear Ball Bushings - Bearing type, wide block, with Dowel pin holes. | Linear Ball Bushings - With central flange, double. LMC-L Series. | Linear Ball Bushings - Pilot flanged, single, with MX lubrication unit. | Linear Ball Bushings - With square flange, stainless steel, long. LMK-ML series. | Linear Ball Bushings - Compact, single bearing type. SH series. | Linear Ball Bushings - With central flange type T, double. LFDTC Series. | Linear Ball Bushings - Single/Double, with MX lubrication unit. | Linear Ball Bushings - Flanged, single, with MX lubrication unit. | Linear Ball Bushings - With pilot flange, double compact, reamed mounting holes. | Linear Ball Bushings - With light square flange. LMJK/LMJK-L Series. | Linear Ball Bushings - With lubrication holes, simple. L-OH Series. | Linear Ball Bushings - With round flange, double (economy model). LFDM Series. | ||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
Days to Ship | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 5 Days or more | 26 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 29 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 11 Days or more | 13 Days or more | 9 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 29 Days or more | 8 Days or more | 12 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
TYPE | Pilot Flange | Flange | Flange | Housings | Housings | Housings | Flange | Flange | Flange | - | Straight | Flange | Housings | Straight | Flange | Flange | Flange | Flange | - | Straight | Flange | Related Components | Straight | Flange | Straight | Housings | Pilot Flange | Straight | - | Straight | Flange |
Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | - | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
Style | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard |
Outer Cylinder Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
Outer Cylinder Surface Finish | None | None / Plated | None / Plated | None | Plated | Plated | None / Plated | None | None | None | None | None | Plated | None | None / Plated | None | - | - | - | None | None / Plated | - | None | None / Plated | None / Plated | Plated | None | None | - | None / Plated | None / Plated |
For Shaft Size(mm) | 6 ~ 16 | 10 ~ 50 | 10 ~ 50 | 16 ~ 30 | 16 ~ 30 | 10 ~ 50 | 16 ~ 30 | - | - | 6 ~ 25 | 6 ~ 60 | 10 ~ 50 | 4 ~ 30 | 5 ~ 20 | 6 ~ 16 | - | 6 ~ 20 | 6 ~ 30 | 3 ~ 20 | 3 ~ 5 | 6 ~ 40 | - | 10 ~ 50 | 10 ~ 50 | 6 ~ 30 | 6 ~ 30 | 6 ~ 16 | - | 8 ~ 25 | 6 ~ 50 | 16 ~ 60 |
For Shaft Size(inch) | - | - | - | - | - | - | - | 0.25 in (1/4") ~ 1.50 in (1-1/2") | 0.25 in (1/4") ~ 1.50 in (1-1/2") | - | - | - | - | - | - | 0.25 in (1/4") ~ 1.50 in (1-1/2") | - | - | - | - | - | - | - | - | - | - | - | 0.25 in (1/4") ~ 1.50 in (1-1/2") | - | - | - |
Overall Length L(mm) | 19 ~ 37 | 39 ~ 128 | 65 ~ 220 | 62 ~ 155 | 59 ~ 158 | 35 ~ 310 | 37 ~ 123 | - | - | 35 ~ 112 | 19 ~ 110 | 39 ~ 128 | 15 ~ 74 | - | 35 ~ 70 | - | - | 35 ~ 123 | 13 ~ 44 | 10 ~ 15 | 35 ~ 153 | - | 39 ~ 220 | 39 ~ 128 | 29 ~ 90 | 37 ~ 202 | 35 ~ 70 | - | 24 ~ 112 | 19 ~ 100 | 68 ~ 209 |
Overall Length L(inch) | - | - | - | - | - | - | - | 0.750 in (3/4") ~ 3.000 in (3") | 1.375 in (1-3/8") ~ 5.688 in (5-11/16") | - | - | - | - | - | - | 1.375 in (1-3/8") ~ 5.688 in (5-11/16") | - | - | - | - | - | - | - | - | - | - | - | 1.375 in (1-3/8") ~ 5.688 in (5-11/16") | - | - | - |
Flange Type | Pilot Flanged | Standard Flange | Standard Flange | - | - | - | Standard Flange | Standard Flange | Center Flanged | Center Flanged | - | Pilot Flanged | - | - | Standard Flange | Standard Flange | - | Standard Flange | - | - | Center Flanged | - | - | Standard Flange | - | - | Pilot Flanged | - | Standard Flange | - | Standard Flange |
Lubrication Type | Standard / Grease coating | With Lubrication Unit MX | With Lubrication Unit MX | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | With Lubrication Unit MX | Standard | - | Standard | Standard | - | Standard | Standard | Standard | Standard | - | With Lubrication Unit MX | With Lubrication Unit MX | Standard | Standard | Standard / Grease coating | Standard | Standard | Standard | Standard |
O.D. D(mm) | 10 ~ 26 | 19 ~ 80 | 19 ~ 80 | 28 ~ 45 | 28 ~ 45 | 19 ~ 80 | 28 ~ 45 | - | - | 12 ~ 40 | 12 ~ 90 | 19 ~ 80 | 8 ~ 45 | - | 10 ~ 26 | - | - | 12 ~ 45 | - | 7 ~ 10 | 12 ~ 60 | - | 19 ~ 80 | 19 ~ 80 | 12 ~ 45 | 12 ~ 45 | 10 ~ 26 | - | 15 ~ 40 | 12 ~ 80 | 28 ~ 90 |
O.D. D(inch) | - | - | - | - | - | - | - | 0.5000 in (1/2") ~ 2.3750 in (2-3/8") | 0.5000 in (1/2") ~ 2.3750 in (2-3/8") | - | - | - | - | - | - | 0.5000 in (1/2") ~ 2.3750 in (2-3/8") | - | - | - | - | - | - | - | - | - | - | - | 0.5000 in (1/2") ~ 2.3750 in (2-3/8") | - | - | - |
Type | - | with End Flange | with End Flange | - | Pillow Blocks Wide Block Type | Pillow Blocks Wide Block Type | with End Flange | - | - | with Center Flange | Standard | - | Housing Type | - | with End Flange | - | - | with End Flange | Housing Type | - | with Center Flange | Related Components | Standard | with End Flange | Standard | Housing Type | - | - | with End Flange | Standard | with End Flange |
Length | Standard | Standard | - | Standard | Standard / Double | Standard / Double / Long | Standard / Double | - | - | Long | Standard | Standard | Standard | Standard / Double | Double | - | Standard / Double | Long | Standard | Standard | Double | - | Standard | Standard | - | Medium / Medium Long / Long | - | - | Standard / Long | Standard | Double |
Ball Recirculating Type | Single | Single | Double | Single / Double | Single / Double | Single / Double | Single / Double | Single | Double | Double | Single | Single | Single | - | Double | Double | - | Double | Single | Single | Double | - | Single / Double | Single | Double | Double | Double | Double | Single / Double | Single | Double |
Precision | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | - | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade |
Eccentricity(µm) | 12 | 12 ~ 20 | 15 ~ 25 | - | - | - | 12 ~ 20 | 12.7(0.5 µin) ~ 20.32(0.8 µin) | 15.24(0.6 µin) ~ 25.4(1 µin) | 12 ~ 15 | - | 12 ~ 20 | - | - | 15 | 15.24(0.6 µin) ~ 25.4(1 µin) | - | 15 ~ 20 | - | 4 | - | - | 12 ~ 25 | 12 ~ 20 | 15 ~ 20 | - | 15 | 12.7(0.5 µin) ~ 25.4(1 µin) | 12 ~ 20 | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy