(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Linear Ball Bushings（TYPE：Flange）
TYPE
-
Straight -
Flange -
Housings -
Related Components -
Standard Flange -
Center Flange -
Pilot Flange
-
Linear Ball Bushings - With round flange, single. LMF Series.
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and fitting is easily achieved by bolting directly to the housing.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Flanged, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With square flange, single. LMK Series.
THK
Type with LMF type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
- Volume Discount
Days to Ship: 8 Days or more Show Stock Products
-
Linear Ball Bushings - Flanged, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With central flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
A load can be placed near the center of the linear bushing to evenly distribute the load and space.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Compact flanged, long. LMH-L Series.
THK
Flange is oval-shaped. More suitable than the LMK-L type for compact designs due to lower core height.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - With pilot flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With square flange, long. LMK-L Series.
THK
Type with LMF-L type flange having flats at 4 locations. Due to a lower core height, this type is more suitable for compact designs than the round flange type.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Compact flanged, single. LMH Series.
THK
The flange and outer cylinder are integrated and the flange is oval-shaped. This gives a lower core height, making this type more suitable for compact designs than the LMK type.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With round flange, long type. LMF-L Series.
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Center flanged, double, with MX lubrication unit.
MISUMI
Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, simple, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With pilot flange, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, single (Inches).
MISUMI
Single ball bushings with configurable flange shape (circular, square or compact) with selectable dimensions in inches. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
Linear Ball Bushings - Center flange, double, long type.
MISUMI
A load can be placed near the center of the linear bushing to evenly distribute the load and space.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Standard/pilot flanged, double, long type.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Bolt-on flange offers assembly convenience. The Long, Pilot Type is designed in such a way that the linear bushing does not protrude toward the opposite side of the linear bushing mount side, and retains a sufficient space on the opposite side.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Center flange, double, special length.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With central pilot flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With flange and clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With pilot flange, single (Inches).
MISUMI
Single bushings with selectable dimensions in inches. With configurable pilot flange shape (circular, square or compact) which is not completely on the end of the bushing, leaving enough space for mounting from the opposite side of the installation. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - Linear/Rotating, flanged.
MISUMI
•TYPE: Flange
•Motion: Linear/Rotary
•Style: Standard
•Outer Cylinder Material: 52100 Bearing Steel Equivalent
•Flange Type: Standard Flange- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Flanged, single, with lubrication unit.
MISUMI
Standard length ball bushing, with configurable pilot flange (circular, square or compact) that facilitates its assembly thanks to the fact that it can be screwed on. With automatic lubrication thanks to the integrated lubrication unit. Significantly extends maintenance periods for the bushing, which translates into cost reduction and time savings. Available in carbon steel or stainless steel (both hardened).
- Volume Discount
- METRIC
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Pilot flanged, double, with MX lubrication unit.
MISUMI
Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Flanged, double. LHF Series.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Center Flanged, Double (Inches).
MISUMI
Double bushings with selectable dimensions in inches. Adds a configurable center flange shape (circular, square or compact) that allows a load to be placed near the center of the linear bushing to evenly distribute the load and space. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 26 Days or more -
Linear Ball Bushings - With square flange, stainless steel, long. LMK-ML series.
THK
Type with LMF-L type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Flanged, single, with MX lubrication unit.
MISUMI
Automatic Lubrication drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, double, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Pilot flanged, single, with MX lubrication unit.
MISUMI
Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 6 Days or more Show Stock Products
-
Linear Ball Bushings - Flanged, double (Inches).
MISUMI
Double flanged ball bushings with configurable shape (circular, square or compact) with selectable dimensions in inches. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - With pilot flange, double (Inches).
MISUMI
Double bushings with selectable dimensions in inches. With configurable pilot flange shape (circular, square or compact) which is not completely on the end of the bushing, leaving enough space for mounting from the opposite side of the installation. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - With central flange type T, double. LFDTC Series.
Ozak Seiko
Double linear bushing with T-type flange that allows a load to be placed near the center of the linear bushing to evenly distribute the load and space. Please note that the number of mounting holes may change depending on the bushing size (from 2 to 4 holes). Available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
- Volume Discount
Days to Ship: 13 Days or more -
Linear Ball Bushings - With square flange, long type, aluminum body. LFWL Series.
Ozak Seiko
Long linear bushing that integrates two single linear bushings inside its aluminum body and adds a square flange that facilitates its assembly thanks to its bolt-on design. This bushing is ideal when it is required to lighten the weight of the structure or application mechanism. It is lubricated by means of a grease fitting included with the bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Linear Ball Bushings - With square pilot flange, long type, aluminum body. LFWLB Series.
Ozak Seiko
Long linear bushing that integrates two single linear bushings inside its aluminum body and adds a square pilot flange which is not completely at the end of the bushing, leaving enough space to mount from the opposite side of the installation. This bushing is ideal when it is required to lighten the weight of the structure or application mechanism. Lubrication is by means of a grease fitting included with the bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Linear Ball Bushings - With round flange, double (economy model). LFDM Series.
Ozak Seiko
Double linear bushing with circular flange for easy assembly due to its bolt-on design. Bushings available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - With square flange, single/double. Super Smart Series (Inches).
Thomson Linear
"Closed Pillow blocks are for use with END supported shafting. For use with Class L shafting
Ball Bushing Bearings included, factory installed, in each Pillow Block"- CAD ：
- 3D
Days to Ship: 16 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| TYPE |
| Motion |
| Style |
| Outer Cylinder Material |
| Outer Cylinder Surface Finish |
| For Shaft Size(mm) |
| For Shaft Size(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Flange Type |
| Lubrication Type |
| O.D. D(mm) |
| O.D. D(inch) |
| Type |
| Length |
| Ball Recirculating Type |
| Precision |
| Eccentricity(µm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | MISUMI | THK | MISUMI | MISUMI | THK | MISUMI | THK | THK | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Ozak Seiko | Ozak Seiko | Ozak Seiko | Ozak Seiko | Thomson Linear |
| Product Series | Linear Ball Bushings - With round flange, single. LMF Series. | Linear Ball Bushings - With square flange, single. LMK Series. | Linear Ball Bushings - With square flange, long. LMK-L Series. | Linear Ball Bushings - With round flange, long type. LMF-L Series. | Linear Ball Bushings - Center flanged, double, with MX lubrication unit. | Linear Ball Bushings - Standard/pilot flanged, double, long type. | Linear Ball Bushings - Center flange, double, special length. | Linear Ball Bushings - Flanged, single, with lubrication unit. | Linear Ball Bushings - Pilot flanged, double, with MX lubrication unit. | Linear Ball Bushings - With square flange, stainless steel, long. LMK-ML series. | Linear Ball Bushings - Flanged, single, with MX lubrication unit. | Linear Ball Bushings - Flanged, double, with MX lubrication unit. | Linear Ball Bushings - Pilot flanged, single, with MX lubrication unit. | Linear Ball Bushings - With central flange type T, double. LFDTC Series. | Linear Ball Bushings - With square flange, long type, aluminum body. LFWL Series. | Linear Ball Bushings - With square pilot flange, long type, aluminum body. LFWLB Series. | Linear Ball Bushings - With round flange, double (economy model). LFDM Series. | Linear Ball Bushings - With square flange, single/double. Super Smart Series (Inches). | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship | 8 Days or more |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 29 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 26 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
6 Days or more
Show Stock Products | 29 Days or more | 29 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 8 Days or more | 16 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
| TYPE | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange | Flange |
| Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
| Style | - | Standard | - | Standard | Standard | - | Standard | - | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Outer Cylinder Material | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Aluminum | Aluminum | Steel | - |
| Outer Cylinder Surface Finish | - | None / Plated | - | None / Plated | None / Plated | - | None / Plated | - | - | - | None | None / Plated | None / Plated | None | None / Plated | None / Plated | None | None | None / Plated | None | - | None / Plated | None | None / Plated | None / Plated | None | - | None / Plated | None / Plated | None | None | None | None / Plated | None / Plated | None / Plated | None / Plated | - |
| For Shaft Size(mm) | 6 ～ 60 | 3 ～ 50 | 6 ～ 60 | 3 ～ 50 | 3 ～ 50 | 6 ～ 30 | 6 ～ 50 | 6 ～ 60 | 6 ～ 30 | 6 ～ 60 | 10 ～ 50 | 6 ～ 16 | 6 ～ 50 | - | 6 ～ 40 | 6 ～ 40 | 6 ～ 30 | 6 ～ 30 | 16 ～ 30 | - | 6 ～ 20 | 10 ～ 50 | 10 ～ 50 | 6 ～ 30 | 6 ～ 16 | - | 6 ～ 30 | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | - | - | 6 ～ 40 | 16 ～ 40 | 16 ～ 40 | 16 ～ 60 | - |
| For Shaft Size(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | - | - | 0.50 in (1/2") ～ 1.50 in (1-1/2") |
| Overall Length L(mm) | 17 ～ 110 | 19 ～ 192 | 17 ～ 110 | 10 ～ 100 | 35 ～ 192 | 35 ～ 123 | 35 ～ 192 | 35 ～ 211 | 19 ～ 64 | 35 ～ 211 | 65 ～ 220 | 19 ～ 37 | 19 ～ 100 | - | 49 ～ 230 | 49 ～ 230 | 29 ～ 90 | 29 ～ 90 | 37 ～ 123 | - | - | 39 ～ 128 | 65 ～ 220 | 29 ～ 90 | 35 ～ 70 | - | 35 ～ 123 | 39 ～ 128 | 65 ～ 220 | 39 ～ 128 | - | - | 35 ～ 153 | 150 ～ 300 | 150 ～ 300 | 68 ～ 209 | - |
| Overall Length L(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.750 in (3/4") ～ 3.000 in (3") | - | - | - | - | - | 0.750 in (3/4") ～ 3.000 in (3") | - | - | - | - | - | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | - | - | - | - | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | - | - | - | - | 2.06 in ～ 5.33 in |
| Flange Type | - | Standard Flange | Standard Flange | Standard Flange | Standard Flange / Center Flanged | Standard Flange | Pilot Flanged | Standard Flange | Standard Flange | - | Pilot Flanged | Standard Flange | Pilot Flanged | Standard Flange | Pilot Flanged | Pilot Flanged | Center Flanged | Pilot Flanged | Standard Flange | Pilot Flanged | - | Standard Flange | Pilot Flanged | Standard Flange | Standard Flange | Center Flanged | Standard Flange | Standard Flange | Standard Flange | Pilot Flanged | Standard Flange | Pilot Flanged | Center Flanged | Standard Flange | Pilot Flanged | Standard Flange | - |
| Lubrication Type | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | With Lubrication Unit MX | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | With Lubrication Unit MX | With Lubrication Unit MX | Standard | Standard | Standard | Standard | With Lubrication Unit MX | With Lubrication Unit MX | With Lubrication Unit MX | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| O.D. D(mm) | 12 ～ 90 | 7 ～ 80 | 12 ～ 90 | 7 ～ 80 | 12 ～ 80 | 12 ～ 45 | 12 ～ 80 | 12 ～ 90 | 12 ～ 45 | 12 ～ 90 | 19 ～ 80 | 10 ～ 26 | 12 ～ 80 | - | 15 ～ 65 | 15 ～ 65 | 12 ～ 45 | 12 ～ 45 | 28 ～ 45 | - | - | 19 ～ 80 | 19 ～ 80 | 12 ～ 45 | 10 ～ 26 | - | 12 ～ 45 | 19 ～ 80 | 19 ～ 80 | 19 ～ 80 | - | - | 12 ～ 60 | 42 ～ 84 | 42 ～ 84 | 28 ～ 90 | - |
| O.D. D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | - | - | - | - | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | - | - | - | - | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | - | - | - | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | - | - | - | - | 1.25 in (1-1/4") ～ 3.62 in (3-5/8") |
| Type | with End Flange | with End Flange | with End Flange | with End Flange | - | with End Flange | - | with End Flange | with End Flange | with End Flange | - | with End Flange | with End Flange | - | - | with End Flange | - | - | with End Flange | - | - | with End Flange | - | with End Flange | with End Flange | - | with End Flange | with End Flange | with End Flange | - | - | - | with Center Flange | with End Flange | with Pilot, End Flange | with End Flange | - |
| Length | Standard | - | Standard | Standard | - | Long | - | Long | Standard | Long | - | Standard | Standard | - | - | - | - | - | Standard / Double | - | Standard / Double | Standard | - | - | Double | - | Long | Standard | - | Standard | - | - | Double | Long | Long | Double | Standard / Double |
| Ball Recirculating Type | Single | Double | Single | Single | Double | Double | Double | Double | Single | Double | Double | Single | Single | Single | Double | Double | Double | Double | Single / Double | Single | - | Single | Double | Double | Double | Double | Double | Single | Double | Single | Double | Double | Double | Double | Double | Double | - |
| Precision | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - |
| Eccentricity(µm) | 12 ～ 25 | 10 ～ 25 | 12 ～ 25 | 8 ～ 20 | 15 ～ 25 | 15 ～ 20 | 15 ～ 25 | 15 ～ 25 | 12 ～ 15 | 15 ～ 25 | 15 ～ 25 | 12 | 12 ～ 20 | 12.7(0.5 µin) ～ 20.32(0.8 µin) | 20 ～ 30 | 20 ～ 30 | 15 ～ 20 | 15 ～ 20 | 12 ～ 20 | 12.7(0.5 µin) ～ 20.32(0.8 µin) | - | 12 ～ 20 | 15 ～ 25 | 15 ～ 20 | 15 | 15.24(0.6 µin) ～ 25.4(1 µin) | 15 ～ 20 | 12 ～ 20 | 15 ～ 25 | 12 ～ 20 | 15.24(0.6 µin) ～ 25.4(1 µin) | 15.24(0.6 µin) ～ 25.4(1 µin) | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Motion
-
Style
-
Standard -
Open
-
-
Outer Cylinder Material
- Steel
- Stainless Steel
- Aluminum
-
Outer Cylinder Surface Finish
- None
- Plated
-
Metric / Inch
- metric
- inch
-
For Shaft Size(mm)
-
For Shaft Size(inch)
-
Overall Length L(mm)
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 19
- 20
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
- 33
- 35
- 36
- 37
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 90
- 91
- 92
- 93
- 94
- 96
- 97
- 99
- 100
- 102
- 103
- 104
- 105
- 106
- 109
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 122
- 123
- 125
- 128
- 130
- 132
- 134
- 135
- 136
- 138
- 140
- 143
- 144
- 145
- 148
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 160
- 165
- 167
- 170
- 175
- 176
- 177
- 184
- 185
- 187
- 192
- 199
- 200
- 202
- 209
- 211
- 215
- 220
- 230
- 243
- 250
- 300
- 310
-
Overall Length L(inch)
- 0.56 in (9/16")
- 0.75 in (3/4")
- 0.750 in (3/4")
- 0.875 in (7/8")
- 1.19 in
- 1.25 in (1-1/4")
- 1.250 in (1-1/4")
- 1.31 in (1-5/16")
- 1.375 in (1-3/8")
- 1.50 in (1-1/2")
- 1.500 in (1-1/2")
- 1.594 in (1-19/32")
- 1.625 in (1-5/8")
- 1.69 in
- 1.75 in (1-3/4")
- 1.875 in (1-7/8")
- 1.94 in
- 2.06 in
- 2.25 in (2-1/4")
- 2.250 in (2-1/4")
- 2.375 in (2-3/8")
- 2.625 in (2-5/8")
- 2.81 in
- 2.813 in (2-13/16")
- 2.88 in
- 3.00 in (3")
- 3.000 in (3")
- 3.094 in (3-3/32")
- 3.20 in
- 3.38 in
- 3.50 in (3-1/2")
- 3.63 in (3-5/8")
- 3.75 in (3-3/4")
- 3.95 in
- 4.00 in (4")
- 4.281 in (4-9/32")
- 4.50 in (4-1/2")
- 4.75 in (4-3/4")
- 5.00 in (5")
- 5.000 in (5")
- 5.33 in
- 5.688 in (5-11/16")
- 6.00 in (6")
- 7.50 in (7-1/2")
- 8.00 in (8")
- 9.00 in (9")
-
Flange Type
-
Standard Flange -
Center Flanged -
Pilot Flanged
-
-
Lubrication Type
- Standard
- Grease coating
- With Lubrication Unit MX
-
O.D. D(mm)
-
O.D. D(inch)
-
Type
-
Length
-
Ball Recirculating Type
-
Precision
-
Eccentricity(µm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
- 15 Days or Less
Related Categories to Linear Ball Bushings
-
- Ball Guides
- Ball Screws
- Ball Screw Support Units
- Oil Free Bushings, Washers
- Oil Free Plates, Guide Rails
- Linear Guides
- Linear Ball Bushings
- Cable Carriers
- Linear Shafts
- Lead Screws, Slide Screws
- Other Linear Motion Components
- Cross Roller
- Linear Rails, V Guides, Oil Free Guides Units
- Shaft Collars
- Actuators
- Shaft Supports
- Spline Shafts
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy