(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Linear Ball Bushings（TYPE：Straight）
TYPE
-
Straight -
Flange -
Housings -
Related Components -
Standard Flange -
Center Flange -
Pilot Flange
-
- On Sale Till 15/12/2024
Linear Ball Bushings - Single Type. LMU/SLMU Series.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
The most standard type in linear ball bushing products.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Single. LM Series.
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications.
Part of the milli series, the most widely used series in Japan.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Linear Ball Bushings - Linear/Rotating, single, no seals. ST, ST-B Series.
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· In the ST type, the balls and ball cage are embedded in the inner side the of outer cylinder, which has been precision ground to ensure a cylindrical form
· The balls are arranged in a staggered form to that the load is equally distributed
· The ball cage is a machined cage made out of lightweight and highly rigid light alloy.
· A slide ring and retainer ring are provided on two sides of the internal diameter of the outer cylinder to prevent overrun of the ball cage.
· With this structure, it is possible to achieve rotating, linear and mixed action with a low friction coefficient.
· Stroke length can be up to double the range of movement of the ball cage within the outer cylinder
· Suitable for a wide range of applications where it is necessary to obtain high accuracy at a low price, including the ink roll parts of a printing machine, the work chuck of a punching press work, press feeders, the work head of an electric discharge machine, the correction device of a take-up roll, textile machines, strain measuring equipment, optical measuring device spindle, copiers, etc.
· Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Since the O.A.L. are shorter than the Single Type, space saving designing in L direction is possible.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Single. LME Series.
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. It is part of the milli size series, which is in general use in Europe.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Single, precision (Inches).
Thomson Linear
Precision Steel Ball Bushing bearings offer great improvements in efficiency, productivity, and accuracy over high-friction plain bearings flat-ways. The all-steel design makes the bearing product line perfect for replacing plain bearings in high temperature applications.
- CAD ：
- 3D
Days to Ship: 16 Days -
Linear Ball Bushings - Linear/Rotating, single, with seals. Series ST-UU, ST-UUB.
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· [Extremely low friction coefficient] Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· [Compact-design] Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.
· [High accuracy and low price] The sliding parts can be manufactured at low cost and a high level of accuracy is obtained.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Single (economy model). LM Series.
Ozak Seiko
It is the most common single bushing, with configurable dimensions in millimeters. Available in hardened carbon steel with or without dust seals. The economical series is ideal for cost reduction.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Single, Open, Super (Inches).
Thomson Linear
The Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction.
The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications. Radially floating bearing plates. When installed in an adjustable housing, the Super Ball Bushing Bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement.- CAD ：
- 3D
Days to Ship: 16 Days -
Linear Ball Bushings - Single. LM-GA Series (With metal retainers).
THK
[Features]
· Standard type. Equivalent to LM type of widely used milli size series, but including metal retainer.- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Single, open (Inches).
Thomson Linear
Precision Steel Ball Bushing bearings offer great improvements in efficiency, productivity, and accuracy over high-friction plain bearings flat-ways.
The all-steel design makes the bearing product line perfect for replacing plain bearings in high temperature applications.
The steel sleeve anti-friction recirculating ball bushing provides rigid low drag movement – ~100x lower drag coefficient than a plain contact bearing.- CAD ：
- 3D
Days to Ship: 16 Days -
- On Sale Till 15/12/2024
Linear Ball Bushings - Single/Double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
2mm smaller in O.D. (D dimension) than Standard Type.- Volume Discount
- METRIC
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Miniature, single. LMS Series.
IKO
Because its miniature size, it is possible to design compact machines and mechanisms. Available in carbon steel and stainless steel. This model does not have the option of dust seals.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 11 Days or more -
Linear Ball Bushings - Single/Double, with MX lubrication unit.
MISUMI
Electroless Ni-plated types are added as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Linear/Rotating, single or double.
MISUMI
Capable of rotary motion, finite linear motion, and the combination of both.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Single (Inches). U-LMU Series.
MISUMI
It is the most common type of linear bushing, with selectable dimensions in inches. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - Single. Super Smart Series (Inches).
Thomson Linear
These universally self-aligning bearings offer twice the load capacity or eight times the travel life of our Super Ball Bushing® bearing. This patented product provides smooth, quiet, low drag linear movement at 6x the load capacity or 216 x the L10 travel life of a conventional steel linear ball bushing bearing.
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Linear Ball Bushings - Double, special length.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Double (Inches). U-LMUW Series.
MISUMI
Double ball bushing, longer than the single bushing. With selectable dimensions in inches. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - Single, IKO brand. LM Series.
IKO
It is the most common single bushing of the IKO brand, with configurable dimensions in millimeters. Available in carbon steel or stainless steel (both hardened), selectable with or without dust seals.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Linear Ball Bushings - Single, Super. SPM Series.
Thomson Linear
The Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction. The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Linear Ball Bushings - Single. Super Series (Inches).
Thomson Linear
The Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction.
The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications. Radially floating bearing plates. When installed in an adjustable housing, the Super Ball Bushing Bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement.- CAD ：
- 3D
Days to Ship: 5 Days -
Linear Ball Bushings - Double, long, LM-L type.
THK
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads and reduces assembly time.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Single. LM-MG Series (Stainless Steel).
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. Part of the milli series, the most widely used series in Japan.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With lubrication holes, simple. L-OH Series.
Ozak Seiko
Standard type ball bushing with lubrication holes that allow for easier and more constant lubricant replenishment, which will improve its performance and life time. Available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel. Ideal bushing if cost savings in maintenance are required.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 14 Days or more -
Linear Ball Bushings - MultiTrac, metric.
Thomson Linear
The extremely rigid MultiTrac Ball Bushing reduces deflection and provides twice the load capacity or eight times the travel life of conventional ball bushing bearings.
The bearing's patented ball control technology eliminates binding and chatter (stick-slip), common with high friction, plain bearings.- CAD ：
- 3D
Days to Ship: 16 Days -
Linear Ball Bushings - Single, open. Super Smart Series (Inches).
Thomson Linear
Super Smart bushings are self-aligning and offer twice the load capacity or eight times the service life of the SUPER series bushings. This patented product provides smooth, quiet, low-resistance linear motion at 6 times the load capacity. It also significantly increases service life over a conventional linear steel ball bushing. Open ball bushings are designed for applications on continuously supported shafts. Configurable inch sizes, compatible with inch linear shafts. Selectable with or without dust seals.
- CAD ：
- 3D
Days to Ship: 16 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| TYPE |
| Motion |
| Style |
| Outer Cylinder Material |
| Outer Cylinder Surface Finish |
| For Shaft Size(mm) |
| For Shaft Size(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Flange Type |
| Lubrication Type |
| O.D. D(mm) |
| O.D. D(inch) |
| Type |
| Length |
| Ball Recirculating Type |
| Precision |
| Eccentricity(µm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | THK | THK | MISUMI | THK | Thomson Linear | THK | Ozak Seiko | Thomson Linear | THK | Thomson Linear | MISUMI | IKO | MISUMI | MISUMI | MISUMI | Thomson Linear | MISUMI | MISUMI | IKO | Thomson Linear | Thomson Linear | THK | THK | Ozak Seiko | Thomson Linear | Thomson Linear |
| Product Series | Linear Ball Bushings - Linear/Rotating, single, no seals. ST, ST-B Series. | Linear Ball Bushings - Linear/Rotating, single, with seals. Series ST-UU, ST-UUB. | Linear Ball Bushings - Single. LM-GA Series (With metal retainers). | Linear Ball Bushings - Single/Double, with MX lubrication unit. | Linear Ball Bushings - Single. LM-MG Series (Stainless Steel). | Linear Ball Bushings - With lubrication holes, simple. L-OH Series. | Linear Ball Bushings - Single, open. Super Smart Series (Inches). | ||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 16 Days |
Same day or more
Show Stock Products | 8 Days or more | 16 Days | 8 Days or more | 16 Days |
Same day or more
Show Stock Products | 11 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 29 Days or more | 5 Days or more |
Same day or more
Show Stock Products | 29 Days or more | 8 Days or more | 5 Days or more | 5 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 14 Days or more | 16 Days | 16 Days |
| Specifications |
|
|
|
|
|
|
|
| |||||||||||||||||||
| TYPE | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
| Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
| Style | Standard | Standard / Open | - | Standard | - | Standard | - | Standard | Open | - | Open | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | Standard | Standard | Open |
| Outer Cylinder Material | Steel / Stainless Steel | Steel | - | Steel / Stainless Steel | Steel | - | - | Steel | - | Steel | - | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | - | Steel | Steel | Steel / Stainless Steel | - | - | Steel / Stainless Steel | Stainless Steel | Steel | - | - |
| Outer Cylinder Surface Finish | None / Plated | - | - | None | - | - | - | None | - | - | - | None | None | None | None | None | - | None / Plated | None | None | - | - | - | - | None / Plated | - | - |
| For Shaft Size(mm) | 3 ～ 50 | 3 ～ 60 | 6 ～ 100 | 6 ～ 20 | 5 ～ 80 | - | 8 ～ 100 | 6 ～ 60 | - | 6 ～ 100 | - | 6 ～ 16 | 3 ～ 5 | 10 ～ 50 | 5 ～ 20 | - | - | 6 ～ 30 | - | 6 ～ 100 | 8 ～ 50 | - | 3 ～ 50 | 3 ～ 40 | 6 ～ 50 | 8 ～ 20 | - |
| For Shaft Size(inch) | - | - | - | - | - | 0.25 in (1/4") ～ 4.00 in (4") | - | - | 0.50 in (1/2") ～ 2.00 in (2") | - | 0.50 in (1/2") ～ 2.00 in (2") | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 0.50 in (1/2") ～ 1.50 in (1-1/2") | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | 0.19 in (3/16") ～ 2.00 in (2") | - | - | - | - | 0.50 in (1/2") ～ 1.50 in (1-1/2") |
| Overall Length L(mm) | 10 ～ 192 | 10 ～ 110 | 19 ～ 100 | 16 ～ 35 | 22 ～ 165 | - | 24 ～ 100 | 19 ～ 110 | - | 17 ～ 175 | - | 19 ～ 70 | 10 ～ 15 | 39 ～ 220 | - | - | - | 29 ～ 90 | - | 17 ～ 175 | 25 ～ 100 | - | 19 ～ 192 | 10 ～ 80 | 19 ～ 100 | 25 ～ 45 | - |
| Overall Length L(inch) | - | - | - | - | - | 0.75 in (3/4") ～ 8.00 in (8") | - | - | 1.25 in (1-1/4") ～ 4.00 in (4") | - | 1.25 in (1-1/4") ～ 4.00 in (4") | - | - | - | - | 0.750 in (3/4") ～ 3.000 in (3") | 1.25 in (1-1/4") ～ 3.00 in (3") | - | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | - | - | 0.56 in (9/16") ～ 4.00 in (4") | - | - | - | - | 1.25 in (1-1/4") ～ 3.00 in (3") |
| Flange Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lubrication Type | Standard | Standard | - | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | With Lubrication Unit MX | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| O.D. D(mm) | 7 ～ 80 | 7 ～ 90 | 12 ～ 130 | 12 ～ 32 | 12 ～ 120 | - | 15 ～ 130 | 12 ～ 90 | - | 12 ～ 150 | - | 10 ～ 26 | 7 ～ 10 | 19 ～ 80 | - | - | - | 12 ～ 45 | - | 12 ～ 150 | 16 ～ 75 | - | 7 ～ 80 | 7 ～ 60 | 12 ～ 80 | 16 ～ 32 | - |
| O.D. D(inch) | - | - | - | - | - | 0.50 in (1/2") ～ 6.00 in (6") | - | - | 0.875 in (7/8") ～ 3.00 in (3") | - | 0.875 in (7/8") ～ 3.00 in (3") | - | - | - | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | 0.875 in (7/8") ～ 2.375 in (2-3/8") | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | - | - | 0.375 in (3/8") ～ 3.00 in (3") | - | - | - | - | 0.875 in (7/8") ～ 2.375 in (2-3/8") |
| Type | Standard | Standard / Open / Clearance Adjustment Type | Standard | Standard | Standard | - | Standard | Standard | - | Standard / Open / Clearance Adjustment Type | - | Standard | - | Standard | - | - | - | Standard | - | - | - | - | Standard | Standard | Standard | - | - |
| Length | Standard | Standard | - | Short | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Double | - | Standard | - | - | Standard | Standard | Standard | Long | Standard | Standard | Standard | Standard |
| Ball Recirculating Type | Single / Double | Single | - | Single | Single | - | - | Single | - | Single | - | Single / Double | Single | Single / Double | - | Single | - | Double | Double | Single | - | - | Double | Single | Single | - | - |
| Precision | High Grade | High Grade / Precision Grade | - | High Grade | High Grade | - | - | High Grade | - | High Grade / Precision Grade | - | High Grade | High Grade | High Grade | - | High Grade | - | High Grade | High Grade | High Grade | - | - | High Grade | High Grade / Precision Grade | High Grade | - | - |
| Eccentricity(µm) | 8 ～ 25 | 4 ～ 25 | - | 12 ～ 15 | 12 ～ 20 | - | - | - | - | 8 ～ 30 | - | 12 ～ 15 | 4 | 12 ～ 25 | - | 12.7(0.5 µin) ～ 20.32(0.8 µin) | - | 15 ～ 20 | 12.7(0.5 µin) ～ 25.4(1 µin) | 12 ～ 30 | - | - | 10 ～ 25 | 8 ～ 20 | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Motion
-
Style
-
Standard -
Open
-
-
Outer Cylinder Material
- Steel
- Stainless Steel
- Aluminum
-
Outer Cylinder Surface Finish
- None
- Plated
-
Metric / Inch
- metric
- inch
-
For Shaft Size(mm)
-
For Shaft Size(inch)
-
Overall Length L(mm)
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 19
- 20
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
- 33
- 35
- 36
- 37
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 90
- 91
- 92
- 93
- 94
- 96
- 97
- 99
- 100
- 102
- 103
- 104
- 105
- 106
- 109
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 122
- 123
- 125
- 128
- 130
- 132
- 134
- 135
- 136
- 138
- 140
- 143
- 144
- 145
- 148
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 160
- 165
- 167
- 170
- 175
- 176
- 177
- 184
- 185
- 187
- 192
- 199
- 200
- 202
- 209
- 211
- 215
- 220
- 230
- 243
- 250
- 300
- 310
-
Overall Length L(inch)
- 0.56 in (9/16")
- 0.75 in (3/4")
- 0.750 in (3/4")
- 0.875 in (7/8")
- 1.19 in
- 1.25 in (1-1/4")
- 1.250 in (1-1/4")
- 1.31 in (1-5/16")
- 1.375 in (1-3/8")
- 1.50 in (1-1/2")
- 1.500 in (1-1/2")
- 1.594 in (1-19/32")
- 1.625 in (1-5/8")
- 1.69 in
- 1.75 in (1-3/4")
- 1.875 in (1-7/8")
- 1.94 in
- 2.06 in
- 2.25 in (2-1/4")
- 2.250 in (2-1/4")
- 2.375 in (2-3/8")
- 2.625 in (2-5/8")
- 2.81 in
- 2.813 in (2-13/16")
- 2.88 in
- 3.00 in (3")
- 3.000 in (3")
- 3.094 in (3-3/32")
- 3.20 in
- 3.38 in
- 3.50 in (3-1/2")
- 3.63 in (3-5/8")
- 3.75 in (3-3/4")
- 3.95 in
- 4.00 in (4")
- 4.281 in (4-9/32")
- 4.50 in (4-1/2")
- 4.75 in (4-3/4")
- 5.00 in (5")
- 5.000 in (5")
- 5.33 in
- 5.688 in (5-11/16")
- 6.00 in (6")
- 7.50 in (7-1/2")
- 8.00 in (8")
- 9.00 in (9")
-
Flange Type
-
Standard Flange -
Center Flanged -
Pilot Flanged
-
-
Lubrication Type
- Standard
- Grease coating
- With Lubrication Unit MX
-
O.D. D(mm)
-
O.D. D(inch)
-
Type
-
Length
-
Ball Recirculating Type
-
Precision
-
Eccentricity(µm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 8 Days or Less
- 9 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
- 15 Days or Less
- 16 Days or Less
Related Categories to Linear Ball Bushings
-
- Ball Guides
- Ball Screws
- Ball Screw Support Units
- Oil Free Bushings, Washers
- Oil Free Plates, Guide Rails
- Linear Guides
- Linear Ball Bushings
- Cable Carriers
- Linear Shafts
- Lead Screws, Slide Screws
- Other Linear Motion Components
- Cross Roller
- Linear Rails, V Guides, Oil Free Guides Units
- Shaft Collars
- Actuators
- Shaft Supports
- Spline Shafts
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy