(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Linear Shafts（End Shape (Right)：No Machining）
Basic Shape
-
Straight -
One End Stepped -
Both Ends Stepped -
Hollow -
Hollow One End Stepped -
Hollow Both Ends Stepped
-
- New Products
Precision Linear Shaft - Straight (not machined).
MISUMI
Case hardened stainless steel with low temp black chrome plating is added as new. [3/31/2023]
Straight Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent and 1045 Carbon Steel Equivalent and 304 Stainless Steel, with the following options for Surface Treatment: Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 3mm - 50mm
[Length range]25mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Volume Discount
- New Pricing
- Price Reduction
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Precision Linear Shafts - One end female threaded.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One end Taped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 4mm - 50mm
[Length range]20mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 6 Days or more -
Precision Linear Shafts - One end tapped with wrench flat / precision type.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One end Taped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 4mm - 50mm
[Length range]15mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 5 Days or more -
Precision Linear Shafts - Hollow, straight (not machined).
MISUMI
Straight Precision Hollow Linear Shaft are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]25mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - One end threaded, undercut, wrench flat/ cross drilled hole.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One Ends Thread Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1495mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Both ends stepped, tapped / non.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
Both Ends Stepped and Tapped or Not-Tapped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1496mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Hardened steel, full length, one/both ends female threaded.
MISUMI
One Ends Tapped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent, with the following options for Surface Treatment : Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 20mm
[Length range]20mm - 150mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - One end threaded.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One Ends Thread Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 5mm - 50mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 6 Days or more -
MISUMI
One or Both End Stepped and Threaded Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is 0.03.
[Diameter range] 4mm - 30mm
[Length range]25mm - 455mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- METRIC
- inCAD Components
Days to Ship: 12 Days or more -
Pre-Cut Straight Linear Shaft - Metric
Thomson Linear
For complete product overview and details on 60 Case Quick Shaft - Straight, Metrict (Thomson Linear) see the sections below:
Days to Ship: 11 Days -
Precision Linear Shafts - Threaded end, thread diameter equal to shaft diameter.
MISUMI
Case hardened stainless steel with low temp black chrome plating is added as new. [3/31/2023]
One Ends Thread Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 3mm - 30mm
[Length range]25mm - 1482mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 6 Days or more -
Precision Linear Shafts - Surface treatment fully plated, nickel plating.
MISUMI
One End Tapped or Threaded Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent and 1045 Carbon Steel Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 8mm - 50mm
[Length range]25mm - 998mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Spec Expansion
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 12 Days or more -
Precision Linear Axes - Fully configurable ends.
MISUMI
Precision Linear Shaft with Configurable Shaft Ends are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]20mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- METRIC
- inCAD Components
Days to Ship: 12 Days or more -
Precision Linear Shafts - Hollow, one end female threaded.
MISUMI
One End Tapped Precision Hollow Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]25mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Straight, without machining, stainless steel, Thomson (inches).
Thomson Linear
•Basic Shape : Straight
•End Shape (Left) : No Machining
•End Shape (Right) : No Machining
For complete product overview and details on 60 Case Quick Shaft - Straight, 440C Stainless Steel, Inch (Thomson Linear) see the sections below:Days to Ship: 11 Days -
Precision Linear Shafts - One end threaded, wrench flat / cross.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One Ends Thread Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 6mm - 50mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 6 Days or more -
Precision Linear Shafts - One end threaded, undercut.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One Ends Thread Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1495mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Hollow, both ends stepped.
MISUMI
Both Ends Stepped Precision Hollow Linear Shafts are available in 52100 Bearing Steel Equivalent with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1496mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Straight (inches).
MISUMI
Straight Precision Inch Linear Shafts are available in Case Hardened Steel and 440C Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating or No Surface Treatment.
[Diameter range] 0.25(1/4) - 1.50(1-1/2)
[Length range]0.75 - 60.00. Use the alteration LKC to specify the length in 0.001 increment.
Metric option available, please click Here.- INCH
Days to Ship: 6 Days -
Precision Linear Shafts - One end female threaded (inch).
MISUMI
One End Taped Precision Inch Linear Shafts are available in Case Hardened Steel and 440C Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating or No Surface Treatment.
[Diameter range] 0.25(1/4) - 1.50(1-1/2)
[Length range]0.75 - 60.00. Use the alteration LKC to specify the length in 0.001 increment.
Metric option available, please click Here.- INCH
Days to Ship: 6 Days -
Precision Linear Shafts - One end stepped, one end tapped / not tapped.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One End Stepped, Tapped or Not-Tapped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 6 Days or more -
Precision Linear Shafts - Key groove on one end.
MISUMI
Case hardened stainless steel with low temp black chrome plating is added as new. [3/31/2023]
Precision Linear Shaft with Key Groove on One End are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]25mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 6 Days or more -
Precision Linear Shafts - Hollow, fully configurable ends.
MISUMI
Precision Hollow Linear Shaft with Configurable Shaft Ends are available in 52100 Bearing Steel Equivalent with the following options for Surface Treatment : Hard Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]20mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Hollow, one male threaded end.
MISUMI
One End Threaded Precision Hollow Linear Shafts are available in 52100 Bearing Steel Equivalent with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 40mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Straight, raw, chrome plated, Thomson (inches).
Thomson Linear
•Basic Shape : Straight
•End Shape (Left) : No Machining
•End Shape (Right) : No Machining
For complete product overview and details on 60 Case Quick Shaft - Straight, Chrome Plated, Inch (Thomson Linear) see the sections below:Days to Ship: 11 Days -
Precision Linear Shafts - Straight, configurable length, without machining, Thomson.
Thomson Linear
•Basic Shape : Straight
•End Shape (Left) : No Machining
•End Shape (Right) : No Machining
For complete product overview and details on 60 Case LinearRace - Straight, Metric (Thomson Linear) see the sections below:Days to Ship: 14 Days -
Precision Linear Shafts - One end stepped end, other end tapped or not, wrench flat type.
MISUMI
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One End Stepped and Tapped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 6 Days or more -
Precision Linear Shafts - Hollow, one stepped end.
MISUMI
One End Stepped Precision Hollow Linear Shafts are available in 52100 Bearing Steel Equivalent with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - Predrilled.
MISUMI
Precision Linear Shaft for Continuous Support are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating or No Surface Treatment.
[Diameter range] 10mm - 50mm
[Length range]200mm - 1500mm.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Precision Linear Shafts - One male threaded end (inch).
MISUMI
One Thread End Precision Inch Linear Shafts are available in Case Hardened Steel and 440C Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating or No Surface Treatment.
[Diameter range]0.25(1/4) - 1.50(1-1/2)
[Length range]1.00 - 59.90. Use the alteration LKC to specify the length in 0.001 increment.
Metric option available, please click Here.- INCH
Days to Ship: 6 Days -
Precision Linear Shafts - Stepped end, female threaded end (inch).
MISUMI
One End Stepped and Tapped Precision Inch Linear Shafts are available in Case Hardened Steel and 440C Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating or No Surface Treatment.
[Diameter range] 0.38(3/8) - 1.50(1-1/2)
[Length range]1.00 - 59.90. Use the alteration LKC to specify the length in 0.001 increment.
Inch option available, please click Here.- INCH
Days to Ship: 6 Days or more -
Precision Linear Shafts - One /both ends stepped and threaded.
MISUMI
Case hardened stainless steel with low temp black chrome plating is added as new. [3/31/2023]
One or Both End Stepped and Threaded Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1480mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- New Pricing
- Price Reduction
- inCAD Components
Days to Ship: 6 Days or more -
Precision Linear Shafts - Straight, without machining, Thomson (inches).
Thomson Linear
For complete product overview and details on 60 Case Quick Shaft - Straight, Inch (Thomson Linear) see the sections below:
Days to Ship: 11 Days -
Straight Linear Shaft - 440C Stainless Steel, Metric
Thomson Linear
•Basic Shape : Straight
•End Shape (Left) : No Machining
•End Shape (Right) : No Machining
For complete product overview and details on 60 Case LinearRace - Straight, 440C Stainless Steel, Metric (Thomson Linear) see the sections below:Days to Ship: Quote
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Basic Shape |
| Shaft Dia. D(mm) |
| Shaft Dia. D(inch) |
| End Shape (Left) |
| End Shape (Right) |
| Shaft End Perpendicularity |
| Material |
| Heat Treated |
| Surface Finish |
| Shaft Tolerance |
| Tightening Tool Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Thomson Linear | MISUMI | MISUMI | MISUMI | MISUMI | Thomson Linear | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Thomson Linear | Thomson Linear | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Thomson Linear | Thomson Linear |
| Product Series | Precision Linear Shafts - One end tapped with wrench flat / precision type. | Precision Linear Shafts - One end threaded, undercut, wrench flat/ cross drilled hole. | Precision Linear Shafts - Hardened steel, full length, one/both ends female threaded. | Precision Linear Shafts - Threaded end, thread diameter equal to shaft diameter. | Precision Linear Shafts - Surface treatment fully plated, nickel plating. | Precision Linear Shafts - Straight, without machining, stainless steel, Thomson (inches). | Precision Linear Shafts - One end threaded, wrench flat / cross. | Precision Linear Shafts - One end stepped, one end tapped / not tapped. | Precision Linear Shafts - Straight, raw, chrome plated, Thomson (inches). | Precision Linear Shafts - Straight, configurable length, without machining, Thomson. | Precision Linear Shafts - One end stepped end, other end tapped or not, wrench flat type. | Precision Linear Shafts - Stepped end, female threaded end (inch). | Precision Linear Shafts - One /both ends stepped and threaded. | Precision Linear Shafts - Straight, without machining, Thomson (inches). | ||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Days to Ship |
Same day or more
Show Stock Products | 6 Days or more | 5 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 6 Days or more | 12 Days or more | 11 Days | 6 Days or more | 12 Days or more | 12 Days or more | 10 Days or more | 11 Days | 6 Days or more | 10 Days or more | 10 Days or more | 6 Days | 6 Days | 6 Days or more | 6 Days or more | 10 Days or more | 10 Days or more | 11 Days | 14 Days | 6 Days or more | 10 Days or more | 10 Days or more | 6 Days | 6 Days or more | 6 Days or more | 11 Days | Quote |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Basic Shape | Straight | Straight | Straight | Hollow | One End Stepped | Both Ends Stepped | Straight | One End Stepped | One End Stepped | Straight | Straight | Straight / One End Stepped | Straight / One End Stepped / Both Ends Stepped | Hollow | Straight | One End Stepped | One End Stepped | Hollow Both Ends Stepped | Straight | Straight | One End Stepped | Straight | Hollow / Hollow One End Stepped / Hollow Both Ends Stepped | Hollow | Straight | Straight | One End Stepped | Hollow One End Stepped | Straight | One End Stepped | One End Stepped | One End Stepped | Straight | Straight |
| Shaft Dia. D(mm) | 3 ～ 50 | 4 ～ 50 | 6 ～ 50 | 6 ～ 50 | 8 ～ 50 | 8 ～ 50 | 6 ～ 20 | 4 ～ 50 | 4 ～ 30 | 12 ～ 40 | 3 ～ 30 | 8 ～ 50 | 6 ～ 50 | 6 ～ 50 | - | 6 ～ 50 | 8 ～ 50 | 6 ～ 50 | - | - | 8 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 40 | - | 60 | 8 ～ 50 | 6 ～ 50 | 10 ～ 50 | - | - | 8 ～ 50 | - | 8 |
| Shaft Dia. D(inch) | - | - | - | - | - | - | - | - | - | 5/8" | - | - | - | - | 1" ～ 5/8" | - | - | - | 1" ～ 5/8" | 1" ～ 5/8" | - | - | - | - | 1" ～ 5/8" | - | - | - | - | 1" ～ 5/8" | 1" ～ 5/8" | - | 1" ～ 5/8" | - |
| End Shape (Left) | No Machining | Tapped | Tapped | No Machining | Threaded | No Machining | Tapped | Threaded | Threaded | No Machining | Threaded | No Machining / Tapped / Threaded | No Machining / Tapped / Threaded / Retaining Ring Groove / Tapped Holes / Hex Hole / Tapered | Tapped | No Machining | Threaded | Threaded | No Machining | No Machining | Tapped | No Machining / Tapped | Keyway | No Machining / Tapped / Threaded / Retaining Ring Groove | Threaded | No Machining | No Machining | Tapped | No Machining | No Machining | Threaded | Tapped | Threaded | No Machining | No Machining |
| End Shape (Right) | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining | No Machining |
| Shaft End Perpendicularity | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) / Perpendicularity (0.03) | - | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.03) | - | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | - | - | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) / Perpendicularity (0.03) | - | - | - | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | - | - | - | - | Perpendicularity (0.2) / Perpendicularity (0.03) | - | Perpendicularity (0.2) | - | - | Perpendicularity (0.2) | - | - |
| Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Stainless Steel |
| Heat Treated | Not Hardened | Not Hardened | Not Hardened / Induction Hardened | - | Not Hardened / Induction Hardened | Not Hardened | - | Not Hardened | Induction Hardened | - | Not Hardened | - | - | - | - | Not Hardened / Induction Hardened | Not Hardened | - | - | - | Not Hardened | Not Hardened | - | - | - | - | Not Hardened / Induction Hardened | - | - | - | - | Not Hardened | - | - |
| Surface Finish | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Low Temperature Black Chrome | None | None / Hard Chrome / Low Temperature Black Chrome | Electroless Nickel | None / Hard Chrome | None / Hard Chrome / Low Temperature Black Chrome | None | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome | None / Hard Chrome / Low Temperature Black Chrome | None | None | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome / Low Temperature Black Chrome | None | None |
| Shaft Tolerance | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | g6 | h5 ～ f8 | h5 ～ f8 | g6 | h5 ～ f8 | g6 | - | h5 ～ f8 | g6 | h5 ～ g6 | g6 | - | h5 ～ f8 | h5 ～ f8 | g6 | - | - | h5 ～ f8 | h5 ～ f8 | g6 | g6 | - | - | h5 ～ f8 | g6 | g6 | - | - | h5 ～ f8 | - | - |
| Tightening Tool Type | - | - | With Wrench Flats / With Cross-Drilled Hole | - | With Wrench Flats / With Cross-Drilled Hole | - | - | - | None / With Wrench Flats | - | - | - | - | - | - | With Wrench Flats / With Cross-Drilled Hole | - | - | - | - | - | - | - | - | - | - | With Wrench Flats | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
- inch
-
Shaft Dia. D(mm)
-
Shaft Dia. D(inch)
-
End Shape (Left)
-
No Machining -
Tapped -
Threaded -
Set Screw Groove -
Retaining Ring Groove -
Keyway -
Tapped Holes -
Hex Hole -
Tapered
-
-
End Shape (Right)
-
No Machining -
Tapped -
Threaded -
Set Screw Groove -
Retaining Ring Groove -
Tapped Holes -
Hex Hole -
Tapered -
Pilot with Tap
-
-
Shaft End Perpendicularity
- Perpendicularity (0.2)
- Perpendicularity (0.03)
-
Material
-
Heat Treated
-
Surface Finish
- None
- Hard Chrome
- Low Temperature Black Chrome
- Electroless Nickel
-
Shaft Tolerance
-
Tightening Tool Type
- None
- With Wrench Flats
- With Cross-Drilled Hole
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 14 Days or Less
Related Categories to Linear Shafts
-
- Ball Guides
- Ball Screws
- Ball Screw Support Units
- Oil Free Bushings, Washers
- Oil Free Plates, Guide Rails
- Linear Guides
- Linear Ball Bushings
- Cable Carriers
- Linear Shafts
- Lead Screws, Slide Screws
- Other Linear Motion Components
- Cross Roller
- Linear Rails, V Guides, Oil Free Guides Units
- Shaft Collars
- Actuators
- Shaft Supports
- Spline Shafts
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy