(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
Days to Ship: | 8 Days or more |
---|
UT COAT 2-Flute Long-Neck Ball CSLEB
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: TiCN
•Shank Taper Angle Bta (°): 11°
Days to Ship: | 8 Days or more |
---|
HM Coated 2-Flute, Long Neck Ball HSLB
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
Days to Ship: | 8 Days or more |
---|
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
DCB 2-Flute Diamond-Coated Ball for Graphite Processing
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Diamond Coat
•R Precision (µm): -0.01~0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Diamond Coat
•R Precision (µm): -0.01~0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
CFB for Raw Material to Processing, 3-Flute Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 3
•Coating: TiCN
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°
Days to Ship: | 8 Days or more |
---|
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Others
•R Precision (µm): -0.01~0.01
•With/Without Torsion: NA
Days to Ship: | 8 Days or more |
---|
HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): -0.005~0.005
•Overall Length (L) (mm): 50
Days to Ship: | 10 Days or more |
---|
HLB, HM Coated 2-Flute Long Neck Ball
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): -0.002~0.002
•With/Without Torsion: Available
Days to Ship: | 9 Days or more |
---|
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 4
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°
Days to Ship: | 8 Days or more |
---|
HFB, HM Coated 4-Flute High-Efficiency Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 4
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°
Days to Ship: | 8 Days or more |
---|
HTNB HM Coated High-Precision Taper Neck Ball
UNION TOOL
•Model: Tapered Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): -0.005~0.005
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
CGB2000 2-Flute Ball for Graphite Processing
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): -0.01~0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
CGB4000 4-Flute Ball for Graphite Processing
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 4
•Coating: Non-Coated
•R Precision (µm): -0.01~0.01
•With/Without Torsion: Available
Days to Ship: | 9 Days or more |
---|
CPRB for Resin Processing, 2-Flute Long Neck Ball
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): -0.01~0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiCN
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 11°
Days to Ship: | 8 Days or more |
---|
UT COAT 3-Flute Long-Neck Ball CFLB
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 3
•Coating: TiCN
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
R Size(mm) |
Model |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Coating |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Link Diameter (d)(mm) |
R Precision(µm) |
Processing Applications |
Brand | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing | HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only) | ||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
R Size(mm) | 0.03 ~ 6 | 0.05 ~ 3 | 0.05 ~ 3 | 1.5 ~ 6 | 0.5 ~ 6 | 0.2 ~ 3 | 0.3 ~ 6 | 0.1 ~ 3 | 0.1 ~ 0.75 | 0.4 ~ 3 | 1 ~ 6 | 1 ~ 6 | 0.1 ~ 2 | 0.2 ~ 6 | 2 ~ 10 | 0.2 ~ 3 | 0.1 ~ 6 | 0.3 ~ 3 |
Model | Bore | Long Neck Bore | Long Neck Bore | Bore | Bore | Long Neck Bore | Bore | Bore | Bore | Long Neck Bore | Bore | Bore | Tapered Neck Bore | Bore | Bore | Long Neck Bore | Bore | Long Neck Bore |
Work Material | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎] | - | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] |
Flute Length (ℓ)(mm) | 0.06 ~ 22 | 0.08 ~ 4.8 | 0.08 ~ 4.8 | 4.5 ~ 25 | 5 ~ 55 | 0.32 ~ 6 | 0.9 ~ 18 | 0.14 ~ 4.2 | 0.3 ~ 2.5 | 0.64 ~ 4.8 | 3 ~ 18 | 3 ~ 18 | 0.16 ~ 3.2 | 0.8 ~ 55 | 20 ~ 60 | 0.4 ~ 6 | 0.3 ~ 18 | 0.48 ~ 4.8 |
Number of Flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 2 | 2 | 3 |
Coating | For High Hardness (Silicone-Based) | TiCN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Diamond Coat | Diamond Coat | TiCN | Others | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN |
Overall Length (L)(mm) | 50 ~ 110 | 45 ~ 120 | 45 ~ 120 | 80 ~ 200 | 60 ~ 180 | 45 ~ 120 | 50 ~ 120 | 50 ~ 60 | 50 | 45 ~ 80 | 40 ~ 60 | 50 ~ 110 | 50 ~ 120 | 60 ~ 200 | 100 ~ 250 | 45 ~ 120 | 50 ~ 110 | 50 ~ 90 |
Length Under Neck (ℓ1)(mm) | - | 0.3 ~ 60 | 0.3 ~ 60 | - | - | 2 ~ 80 | - | - | - | 3 ~ 30 | - | - | 1.5 ~ 62 | - | - | 1 ~ 50 | - | 2 ~ 40 |
Link Diameter (d)(mm) | 4 ~ 12 | 3 ~ 6 | 3 ~ 6 | 3 ~ 12 | 4 ~ 12 | 4 ~ 6 | 4 ~ 12 | 4 ~ 6 | 4 | 4 ~ 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 6 | 4 ~ 12 | 4 ~ 20 | 4 ~ 6 | 4 ~ 12 | 4 ~ 6 |
R Precision(µm) | -0.007~0.007 ~ -0.002~0.002 | -0.005~0.005 ~ -0.002~0.002 | -0.005~0.005 ~ -0.002~0.002 | -0.007~0.007 ~ -0.005~0.005 | -0.01~0.01 | -0.01~0.01 | -0.01~0.01 ~ -0.005~0.005 | -0.01~0.01 | -0.005~0.005 | -0.002~0.002 | -0.01~0.01 ~ -0.005~0.005 | -0.01~0.01 ~ -0.005~0.005 | -0.005~0.005 | -0.01~0.01 | -0.01~0.01 | -0.01~0.01 | -0.007~0.007 ~ -0.005~0.005 | -0.007~0.007 ~ -0.005~0.005 |
Processing Applications | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving | Carving |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy