(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Totaku Industries
Inner and outer diameter flat types for non-PVC hoses. It has excellent heat resistance and flexibility, enabling its use for food-related applications. Semi-transparent design enables checking of material being transported.
[Features]
· Can be used for food applications.* Not suited for transporting food or fluids that contain oil.
· Compliant to Health, Labor and Welfare Ministry Notification No. 201 Food Sanitation Laws (the item of the dissolution test (heptane) for oil and fat and fatty food has been excluded).
It has achieved excellent heat resistance and flexibility.
As it can use hot water cleaning and can be washed in 95 percent ethanol, it is very hygienic. (Perform hot water cleaning at temperatures of 80°C with pressure of 0.1 Mpa or less, and a pressurization time of within 3 minutes).
· It is lightweight with high abrasion resistance. Both inside and outside surfaces are smooth. Semi-transparent design enables checking of material being transported.
Days to Ship: | 14 Days or more |
---|
Totaku Industries
Hose for powder transport using special anti-static electricity combined elastomers. The interior surface has good sliding characteristics and exhibits high transportability. In addition, it is lightweight and flexible. with excellent abrasion resistance.
[Features]
· Can be used for food applications.* Not suited for transporting food or fluids that contain oil.
· Compliant to Health, Labor and Welfare Ministry Notification No. 201 Food Sanitation Laws (the item of the dissolution test (heptane) for oil and fat and fatty food has been excluded).
・The interior surface has good sliding characteristics and exhibits high transportability.
▪Provides excellent anti-static electricity benefits.
・It is lightweight and flexible with excellent abrasion resistance characteristics.
・This is semi-transparent enabling confirmation of the transported materials.
Days to Ship: | 12 Days or more |
---|
Totaku Industries
A PVC-free hose that utilizes an olefin elastomer for use in food applications . A reinforcing cord gives the hose an allowable pressure resistance performance tolerance of 0.5 MPa.
[Features]
· Usable for food applications.
· This hose is not suitable for handling foods or liquids containing oils.
· Compliant with the Ministry of Health, Labour and Welfare Notification No. 201 Food Sanitation Act (however, the heptane dissolution test items for oils, fats, and fatty food are excluded).
· Please perform hot water washing at temperature: ≤ 80°C, pressure: ≤ 0.1 MPa, and pressurization time within 3 minutes.
· The hose can be cleaned hygienically using 95% ethanol.
· The hose may be incinerated after use without generating harmful hydrogen chloride gas, sulfur oxides, nitrogen oxides, hydrogen cyanide, or ammonia (ash content: ≤ 0.1%).
· The hose is semi-transparent, which enables checking of the material being transported.
· The hose is flexible for enhanced workability.
· A reinforcing cord has been included to allow the hose to withstand a maximum allowable pressure of 0.5 MPa (5.1 kgf/cm2).
· The hose is lightweight and floats in water.
Days to Ship: | 12 Days or more |
---|
TAC Eco Line Heat Resistance and Oil Resistance
Totaku Industries
In addition to general food transport, this is non-PVC hose is suited to the transport of oils and oily foods. Semi-transparent design enables checking of material being transported. A reinforcing cord confers an allowed pressure tolerance of 0.5 MPA.
[Features]
・This can be used for the transport of fat and fatty foods, as well as general foods.
・This is compatible with the Health, Labor and Welfare Ministry Notification No.201 Food Sanitation Laws. (compliant with all items included as Heptane items)
・This is hygienic and capable of hot water cleaning ※1, 95% ethanol cleaning.
・After using the hose, no harmful gases※2 that are flammable are produced (incineration ash of 0.1% or less).
・This is semi-transparent, which enables confirmation of the transported materials.
▪ This includes a reinforcing cord and has a maximum pressure tolerance of 0.5 MPA (5.1 kgf/f).
・This is lightweight and floats on water.
Days to Ship: | 12 Days or more |
---|
Totaku Industries
TAC SD-A lightweight type. A hose with improved flexibility.
[Features]
· A TACSD-A lightweight type.
· Flexibility is improved due to the TACSD-A
Days to Ship: | 12 Days or more |
---|
Totaku Industries
[Features]
· Grounding wire (copper) included, with excellent antistatic effect.
Transparency enables checks of transported items.
Days to Ship: | 13 Days or more |
---|
Totaku Industries
[Features]
· Sustained anti-static effect due to the use of special blended soft resin.
· Transparency (clear green color) makes it easy to observe what is passing through the tube.
Days to Ship: | 12 Days or more |
---|
Totaku Industries
The abrasion resistance performance is approximately 4 times that of TAC HERAN-N. A superior antistatic effect is achieved by the introduction a ground wire. Liquids are transported smoothly due to the extremely smooth inner surface. The transparent duct enables checking of the material being transported.
[Features]
· This product has 4 times the abrasion resistance of TAC HERAN-N (based on for initial value of 1 for TAC HERAN-N in the abrasion amount comparison test—eight hours after starting).
· The duct hose is transparent, which enables visually checking inside the duct.
· Superior anti-static effect due to the inclusion of a ground wire.
· Liquids are transported smoothly due to the extremely smooth inner surface.
Days to Ship: | 12 Days or more |
---|
Totaku Industries
A lightweight, flexible, and wear resistant hose. The wear resistance performance is 4 times that of TAC Heran New Heat Resistant. Offers excellent durability due to the reinforcing thread, allowing use in locations with different heights where tensile loads are applied.
[Features]
· Has 4 times the wear resistance of TAC Heran New Heat Resistant (assuming the initial wear (8 hours after test start) of TAC Heran New Heat Resistant is 1, in the abrasion loss comparison).
· The product is transparent which makes it easy to check fluids and to find locations where fluids are clogged.
· Lightweight and flexible.
· Offers a pressure resistance performance that can withstand up to a maximum allowable pressure of 0.5Mpa (5.1kgf/f).
· Offers excellent durability due to reinforcing thread, allowing use possible in locations with different heights where tensile loads are applied to the hose.
· Offers a superior anti-static effect by means of a ground wire.
Days to Ship: | 47 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Applicable Fluid |
Mounting Metal Pieces(Fittings etc.,) |
Hose Material |
Color |
O.D. D(Ø) |
Nominal I.D. d(φ) |
Properties |
Brand | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries |
---|---|---|---|---|---|---|---|---|---|
Product Series | |||||||||
Days to Ship | 14 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 13 Days or more | 12 Days or more | 12 Days or more | 47 Days or more |
Applicable Fluid | Water / Food | Water / Chemical / Powder / Food | Water / Powder / Food | Water / Powder / Food / Oil (Mineral Oil) | Water | Powder | Powder | Powder / Cement / Grains | Powder / Grains |
Mounting Metal Pieces(Fittings etc.,) | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Hose Material | Elastomer | Elastomer | Elastomer | Elastomer | Others | Others | Others | Polyurethane | Polyurethane |
Color | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) |
O.D. D(Ø) | 46 ~ 60.6 | 47.5 ~ 120 | 36.7 ~ 95.5 | 37.4 ~ 51 | 30.8 ~ 141.6 | 33.7 ~ 226.5 | 30.8 ~ 172 | 48.5 ~ 226.4 | 121.8 |
Nominal I.D. d(φ) | 38 ~ 50 | 38 ~ 100 | 25 ~ 75 | 25 ~ 38 | 25 ~ 125 | 25 ~ 200 | 25 ~ 150 | 38 ~ 200 | 100 |
Properties | Abrasion Resistance / Heat Resistance / Transparency / Flexibility | Antistatic Performance / Abrasion Resistance / Transparency / Flexibility | Pressure Resistance / Transparency / Flexibility | Pressure Resistance / Heat Resistance / Oil Resistance / Transparency | Transparency / Flexibility / Vacuum | Antistatic Performance / Transparency / Vacuum | Antistatic Performance / Transparency | Antistatic Performance / Abrasion Resistance / Transparency | Antistatic Performance / Abrasion Resistance / Transparency |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy