(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Totaku Industries
[Features]
· Grounding wire (copper) included, with excellent antistatic effect.
Transparency enables checks of transported items.
Days to Ship: | 13 Days or more |
---|
Totaku Industries
Uses abrasion resistant rubber for three times the abrasion resistance of TAC SD-A. Conductive for anti-static effects.
Days to Ship: | 13 Days or more |
---|
Totaku Industries
Hose for powder transport using special anti-static electricity combined elastomers. The interior surface has good sliding characteristics and exhibits high transportability. In addition, it is lightweight and flexible. with excellent abrasion resistance.
[Features]
· Can be used for food applications.* Not suited for transporting food or fluids that contain oil.
· Compliant to Health, Labor and Welfare Ministry Notification No. 201 Food Sanitation Laws (the item of the dissolution test (heptane) for oil and fat and fatty food has been excluded).
・The interior surface has good sliding characteristics and exhibits high transportability.
▪Provides excellent anti-static electricity benefits.
・It is lightweight and flexible with excellent abrasion resistance characteristics.
・This is semi-transparent enabling confirmation of the transported materials.
Days to Ship: | 12 Days or more |
---|
Totaku Industries
A PVC-free hose that utilizes an olefin elastomer for use in food applications . A reinforcing cord gives the hose an allowable pressure resistance performance tolerance of 0.5 MPa.
[Features]
· Usable for food applications.
· This hose is not suitable for handling foods or liquids containing oils.
· Compliant with the Ministry of Health, Labour and Welfare Notification No. 201 Food Sanitation Act (however, the heptane dissolution test items for oils, fats, and fatty food are excluded).
· Please perform hot water washing at temperature: ≤ 80°C, pressure: ≤ 0.1 MPa, and pressurization time within 3 minutes.
· The hose can be cleaned hygienically using 95% ethanol.
· The hose may be incinerated after use without generating harmful hydrogen chloride gas, sulfur oxides, nitrogen oxides, hydrogen cyanide, or ammonia (ash content: ≤ 0.1%).
· The hose is semi-transparent, which enables checking of the material being transported.
· The hose is flexible for enhanced workability.
· A reinforcing cord has been included to allow the hose to withstand a maximum allowable pressure of 0.5 MPa (5.1 kgf/cm2).
· The hose is lightweight and floats in water.
Days to Ship: | 13 Days or more |
---|
TAC Eco Line Heat Resistance and Oil Resistance
Totaku Industries
In addition to general food transport, this is non-PVC hose is suited to the transport of oils and oily foods. Semi-transparent design enables checking of material being transported. A reinforcing cord confers an allowed pressure tolerance of 0.5 MPA.
[Features]
・This can be used for the transport of fat and fatty foods, as well as general foods.
・This is compatible with the Health, Labor and Welfare Ministry Notification No.201 Food Sanitation Laws. (compliant with all items included as Heptane items)
・This is hygienic and capable of hot water cleaning ※1, 95% ethanol cleaning.
・After using the hose, no harmful gases※2 that are flammable are produced (incineration ash of 0.1% or less).
・This is semi-transparent, which enables confirmation of the transported materials.
▪ This includes a reinforcing cord and has a maximum pressure tolerance of 0.5 MPA (5.1 kgf/f).
・This is lightweight and floats on water.
Days to Ship: | 13 Days or more |
---|
Totaku Industries
A hose lighter and more flexible than the TAC SD-C Food model. Its inner surface is slicker and provides better anti-static prevention. Use to transport food in powder or grain form, as well as steamed rice or food containers.
Days to Ship: | 13 Days or more |
---|
Totaku Industries
[Features]
· Sustained anti-static effect due to the use of special blended soft resin.
· Transparency (clear green color) makes it easy to observe what is passing through the tube.
Days to Ship: | 13 Days or more |
---|
Totaku Industries
[Features]
∙ Heat resistant specifications to resist 100℃ hot air (straight pipes that are designed to withstand 120℃ hot air).
∙ In addition to the conductive rubber, we use steel wire for grounding, which considerably improves safety.
∙ Compared to TAC helang, ozone degradation is less likely to happen to this hose.
∙ Product has superior weather resistance properties
Days to Ship: | 13 Days or more |
---|
Totaku Industries
The abrasion resistance performance is approximately 4 times that of TAC HERAN-N. A superior antistatic effect is achieved by the introduction a ground wire. Liquids are transported smoothly due to the extremely smooth inner surface. The transparent duct enables checking of the material being transported.
[Features]
· This product has 4 times the abrasion resistance of TAC HERAN-N (based on for initial value of 1 for TAC HERAN-N in the abrasion amount comparison test—eight hours after starting).
· The duct hose is transparent, which enables visually checking inside the duct.
· Superior anti-static effect due to the inclusion of a ground wire.
· Liquids are transported smoothly due to the extremely smooth inner surface.
Days to Ship: | 13 Days or more |
---|
Totaku Industries
A lightweight, flexible, and wear resistant hose. The wear resistance performance is 4 times that of TAC Heran New Heat Resistant. Offers excellent durability due to the reinforcing thread, allowing use in locations with different heights where tensile loads are applied.
[Features]
· Has 4 times the wear resistance of TAC Heran New Heat Resistant (assuming the initial wear (8 hours after test start) of TAC Heran New Heat Resistant is 1, in the abrasion loss comparison).
· The product is transparent which makes it easy to check fluids and to find locations where fluids are clogged.
· Lightweight and flexible.
· Offers a pressure resistance performance that can withstand up to a maximum allowable pressure of 0.5Mpa (5.1kgf/f).
· Offers excellent durability due to reinforcing thread, allowing use possible in locations with different heights where tensile loads are applied to the hose.
· Offers a superior anti-static effect by means of a ground wire.
Days to Ship: | 47 Days or more |
---|
Totaku Industries
Excellent pressure resistance, with a pressure tolerance of 1.00 MPA. The structure does not stretch when compressed. Uses abrasion-resistant rubber for the inner layer, offering excellent abrasion resistance. Stands up to external pressure and deforms little.
Days to Ship: | 13 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Applicable Fluid |
Mounting Metal Pieces(Fittings etc.,) |
Hose Material |
Color |
O.D. D(Ø) |
Nominal I.D. d(φ) |
Properties |
Brand | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries |
---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | |||||||||||
Days to Ship | 13 Days or more | 13 Days or more | 12 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 47 Days or more | 13 Days or more |
Applicable Fluid | Powder | Powder | Powder | Powder | Powder | Powder | Powder | Powder | Powder | Powder | Powder |
Mounting Metal Pieces(Fittings etc.,) | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Hose Material | Others | Others | Elastomer | Elastomer | Elastomer | Vinyl Chloride | Others | Ethylene Propylene Rubber | Polyurethane | Polyurethane | Others |
Color | Transparent (including non-white colors) | Black | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Green | Transparent (including non-white colors) | Black | Transparent (including non-white colors) | Transparent (including non-white colors) | Orange |
O.D. D(Ø) | 33.7 ~ 226.5 | 47 ~ 172 | 47.5 ~ 120 | 36.7 ~ 95.5 | 37.4 ~ 51 | 115 ~ 172 | 30.8 ~ 172 | 47.8 ~ 173 | 48.5 ~ 226.4 | 121.8 | 69.5 ~ 247.5 |
Nominal I.D. d(φ) | 25 ~ 200 | 38 ~ 150 | 38 ~ 100 | 25 ~ 75 | 25 ~ 38 | 100 ~ 150 | 25 ~ 150 | 38 ~ 150 | 38 ~ 200 | 100 | 50 ~ 200 |
Properties | Antistatic Performance / Transparency / Vacuum | Antistatic Performance / Abrasion Resistance / Vacuum | Antistatic Performance / Abrasion Resistance / Transparency / Flexibility | Pressure Resistance / Transparency / Flexibility | Pressure Resistance / Heat Resistance / Oil Resistance / Transparency | Antistatic Performance / Non-adhesive / Flexibility | Antistatic Performance / Transparency | Abrasion Resistance / Weather Resistance / Heat Resistance / Vacuum | Antistatic Performance / Abrasion Resistance / Transparency | Antistatic Performance / Abrasion Resistance / Transparency | Abrasion Resistance / Pressure Resistance / Shape Retention |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy