Suruga Seiki Pin Holes & Diaphragms

• 

  Variable slit

  Suruga Seiki

  [Features]
  · Double opening variable slit.
  · The slit width is adjusted with the micrometer head.
  · The slit width and central position are constant.
  · For the guide of the double opening slit, a V groove rail and cross roller are used, which reduced the inclination of the slit during operation.
  · The slit height is adjusted with a Hartmann plate

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Days or more

• 

  Iris diaphragm

  Suruga Seiki

  [Features]
  · Holder with iris diaphragm.
  · The diaphragm diameter can be changed between φ 1.5 to φ 27 mm.
  · Fixed by turning the knob for changing the diaphragm diameter (shared with the clamp).

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Pin Hole Holder

  Suruga Seiki

  [Features]
  · Fixes the pin hole. It allows adjustment in YZ axis direction.
  · Pin holes with an outside diameter of 16 mm can be used.
  · The pin hole is fixed by the screw rings (M20P=0.5).
  · Maintains the center of the optical axis at a height of 25 mm above the floor.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Days or more

• 

  Variable Pinhole Holder

  Suruga Seiki

  There are small-diameter holes in 8 sizes at every 45° around the rotating disk. Positioning of each hole is done by the click-stop system. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

Loading...