(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
MHRH230 2-Flute Long Neck End Mill for High-Hardness
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
SSF120 CBN Super Surface End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: Ultra-Small R
•Coating: Non-Coated
•Overall Length (L) (mm): 50
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Overall Length (L) (mm): 50
Days to Ship: | 8 Days or more |
---|
AL2D-2 Aluminum-Only End Mill (2x Blade Length Type)
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Work Material: Aluminum
Days to Ship: | 8 Days or more |
---|
AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Work Material: Aluminum
Days to Ship: | 8 Days or more |
---|
AL5D-2 Aluminum-Only End Mill (5x Blade Length Type)
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Work Material: Aluminum
Days to Ship: | 8 Days or more |
---|
AL3D-2DLC Aluminum-Only End Mill (DLC Coating)
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: Sharp Corner
•Coating: DLC
•Work Material: Aluminum
Days to Ship: | 8 Days or more |
---|
NEA-2 Aluminum (Non-Ferrous) End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Link Diameter (d) (mm): 6
Days to Ship: | 8 Days or more |
---|
AL-3LS Long Shank End Mill for Aluminum (Under-Shank)
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Work Material: Aluminum
Days to Ship: | 8 Days or more |
---|
ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Work Material: Aluminum
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
NHR-2 Long Neck End Mill (for Deep Ribs)
NS TOOL
•Model: Long Neck Square
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•(γ) Neck Angle (°): 12
Days to Ship: | 8 Days or more |
---|
MHDH445 4-Flute Square-End Mill for High-Hardness
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Overall Length (L) (mm): 60
Days to Ship: | Same day or more |
---|
Show Stock Products
MHRH430 4-Flute Long Neck End Mill for High-Hardness
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
RSE230 End Mill for Resin Clear Cut
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
Ultra-Fine Machining End Mill Micro Edge MSME100
NS TOOL
•Model: Square
•Helix Angle (θ): Without Torsion
•Flute Shape: With Lead
•Coating: Non-Coated
•Overall Length (L) (mm): 45
Days to Ship: | 8 Days or more |
---|
DX for Copper Electrode / Aluminum / Plastic, 2-Blade End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSES230P MUGEN-COATING 2-Flute Sharp Edge Short End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSEM230 MUGEN-COATING 2-Flute Medium End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSE345 MUGEN-COATING 3-Flute End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 3
Days to Ship: | 8 Days or more |
---|
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSE430P MUGEN-COATING 4-Flute Sharp Edge End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSEM430 MUGEN-COATING 4-Flute Medium End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSZ345 MUGEN-COATING POWER "Z" End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 3
Days to Ship: | 8 Days or more |
---|
MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MHD445 MUGEN-COATING 4-Flute End Mill for Hardened Steel
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Overall Length (L) (mm): 60
Days to Ship: | 8 Days or more |
---|
MSE230M MUGEN-COATING 2-Flute End Mill with Measured Diameter
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSX440 MUGEN-COATING POWER End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Ultra-Small R
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX225 MUGEN-COATING 2-Flute LEAD 25 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX425 MUGEN-COATING 4-Flute LEAD 25 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX430 MUGEN-COATING 4-Flute LEAD 30 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX235 MUGEN-COATING 2-Flute LEAD 35 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX240 MUGEN-COATING 2-Flute LEAD 40 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX245 MUGEN-COATING 2-Flute LEAD 45 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 6
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
Brand | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing) | DX for Copper Electrode / Aluminum / Plastic, 2-Blade End Mill | MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing) | MSE230M MUGEN-COATING 2-Flute End Mill with Measured Diameter | |||||||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 0.1 ~ 3 | 0.1 ~ 12 | 1 ~ 10 | 0.2 ~ 2 | 0.03 ~ 0.1 | 0.5 ~ 12 | 1 ~ 12 | 1 ~ 12 | 1 ~ 12 | 3 ~ 6 | 5 ~ 12 | 1 ~ 12 | 0.5 ~ 12 | 0.5 ~ 12 | 0.5 ~ 12 | 0.5 ~ 11.9 | 0.5 ~ 11.9 | 0.5 ~ 5 | 1 ~ 4 | 1 ~ 6 | 0.1 ~ 6 | 0.01 ~ 0.05 | 0.5 ~ 6 | 0.1 ~ 12 | 0.1 ~ 12 | 0.5 ~ 12 | 3 ~ 12 | 1 ~ 12 | 1 ~ 12 | 1 ~ 20 | 1 ~ 12 | 0.1 ~ 6 | 1 ~ 4 | 0.1 ~ 6 | 3 ~ 18 | 0.3 ~ 12 | 1 ~ 12 | 1 ~ 12 | 0.1 ~ 12 | 1 ~ 12 | 0.3 ~ 12 | 1 ~ 12 | 0.3 ~ 12 | 1 ~ 12 | 5 ~ 12 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] / Copper[◎] | Aluminum[◎] | Aluminum[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Titanium[○] |
Flute Length (ℓ)(mm) | 0.08 ~ 4.5 | 0.2 ~ 24 | 1.5 ~ 15 | 0.1 ~ 1 | 0.03 ~ 0.1 | 1 ~ 24 | 3 ~ 36 | 5 ~ 60 | 3 ~ 36 | 10 ~ 30 | 7.5 ~ 18 | 1.5 ~ 18 | 0.5 ~ 12 | 1 ~ 24 | 1.5 ~ 36 | 2 ~ 47.6 | 2.5 ~ 59.5 | 0.7 ~ 7.5 | 2 ~ 8 | 0.8 ~ 9 | 0.3 ~ 50 | 0.01 ~ 0.05 | 1 ~ 12 | 0.15 ~ 30 | 0.15 ~ 24 | 2 ~ 48 | 8 ~ 30 | 2.5 ~ 30 | 2.5 ~ 30 | 4 ~ 80 | 1.5 ~ 26 | 0.15 ~ 9 | 1.5 ~ 8 | 0.15 ~ 15 | 8 ~ 32 | 0.3 ~ 12 | 1 ~ 12 | 2 ~ 24 | 0.3 ~ 36 | 3 ~ 36 | 1.2 ~ 48 | 4 ~ 48 | 1.5 ~ 60 | 5 ~ 60 | 10 ~ 30 |
Number of Flutes(sheet) | 2 | 2 | 4 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 1 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 3 | 2 | 4 | 2 | 4 | 2 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 4 | 6 |
Model | Long Neck Square | Square | Long Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Square | Long Neck Square | Long Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Coating | For High Hardness (Silicone-Based) | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
Link Diameter (d)(mm) | 4 ~ 6 | 4 ~ 12 | 4 ~ 10 | 4 | 4 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 | 4 ~ 10 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 3 ~ 6 | 6 | 4 ~ 6 | 3 ~ 6 | 4 | 4 ~ 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 6 | 6 | 4 ~ 6 | 6 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 |
Overall Length (L)(mm) | 45 ~ 100 | 45 ~ 80 | 50 ~ 150 | 50 | 50 | 45 ~ 80 | 45 ~ 90 | 50 ~ 110 | 45 ~ 90 | 50 ~ 70 | 80 ~ 150 | 45 ~ 80 | 40 ~ 70 | 40 ~ 75 | 40 ~ 85 | 45 ~ 105 | 40 ~ 110 | 35 ~ 90 | 60 | 50 ~ 110 | 45 ~ 130 | 45 | 45 ~ 60 | 45 ~ 80 | 45 ~ 80 | 50 ~ 110 | 50 ~ 80 | 45 ~ 80 | 45 ~ 80 | 50 ~ 140 | 45 ~ 80 | 45 ~ 120 | 60 | 45 ~ 55 | 55 ~ 105 | 45 ~ 80 | 45 ~ 80 | 45 ~ 80 | 45 ~ 80 | 45 ~ 80 | 45 ~ 105 | 45 ~ 105 | 45 ~ 105 | 45 ~ 105 | 60 ~ 80 |
Length Under Neck (ℓ1)(mm) | 0.3 ~ 50 | - | 4 ~ 80 | 0.5 ~ 5 | - | - | - | - | - | - | - | 3 ~ 36 | - | - | - | - | - | 2 ~ 40 | - | 4 ~ 50 | 0.8 ~ 80 | - | - | - | - | - | - | - | - | - | - | 0.3 ~ 60 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Processing Applications | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting |
Flute Shape | With Lead | With Lead | With Lead | Ultra-Small R | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | With Lead | Sharp Corner | With Lead | Sharp Corner | With Lead | With Lead | With Lead | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | Ultra-Small R | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead |
Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) / Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Without Torsion | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy