(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Nachi-Fujikoshi
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Supports a wide range of applications from raw materials to high hardness steel.
Days to Ship: | 8 Days or more |
---|
DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC
Nachi-Fujikoshi
End mill for aluminum, suitable for a wide range of side wall machining, grooving deep grooves or grooving in deep locations.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Days to Ship: | 8 Days or more |
---|
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Days to Ship: | 8 Days or more |
---|
GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing. Cutting edge has a sharp corner.
Days to Ship: | 8 Days or more |
---|
GSX MILL 2-Flute Blade 2D GSX2C-2D
Nachi-Fujikoshi
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]
· Blade Shape: With Lead
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Days to Ship: | 8 Days or more |
---|
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: | 8 Days or more |
---|
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: | Same day or more |
---|
Show Stock Products
GSX MILL 4-Flute Blade 3D GSX4C-3D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: | Same day or more |
---|
Show Stock Products
Nachi-Fujikoshi
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
Days to Ship: | Same day or more |
---|
Show Stock Products
GSX MILL VL Ti/ SUS 2.5D GSXVL4T-2.5D
Nachi-Fujikoshi
The variable split, variable lead, and sharp cutting edge suppress chatter and make it suitable for heat-resistant alloys.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Capable of high-efficient machining of hardened materials. Suitable for wide side finishing.
Days to Ship: | 8 Days or more |
---|
X's Mill Geo Long Shank 4GEOLS
Nachi-Fujikoshi
High precision machining is possible even for deep engraving.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.
Days to Ship: | 8 Days or more |
---|
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: | 8 Days or more |
---|
Carbide Mini Square End Mill with 2 Flutes 2MNE
Nachi-Fujikoshi
Carbide solid type small diameter end mill. Suitable for grooving precision molds and precision components.
Days to Ship: | 8 Days or more |
---|
Carbide Mini Square End Mill with 4 Flutes 4MNE
Nachi-Fujikoshi
Carbide solid type small diameter end mill. Suitable for side-wall machining precision molds and precision components.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
[Features]
· End mill for aluminum and copper alloys.
· Dry machining of aluminum is possible.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Days to Ship: | 8 Days or more |
---|
GSX MILL 2-Flute Blade 3D GSX2C-3D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: | 8 Days or more |
---|
GSX MILL 2-Flute Blade 4D GSX2C-4D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: | 8 Days or more |
---|
GSX MILL 4-Flute Blade 2D GSX4C-2D
Nachi-Fujikoshi
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Days to Ship: | 8 Days or more |
---|
GSX MILL 4-Flute Blade 4D GSX4C-4D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Suitable for side processing of wide side surfaces and deep positions.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
General purpose carbide end mill. Suitable for grooving.
Days to Ship: | 8 Days or more |
---|
DLC Mill, Sharp Corner, 2-Flute 2DLCSC
Nachi-Fujikoshi
End mill for aluminum and copper alloys. Adopts sharp corners.
Days to Ship: | 8 Days or more |
---|
DLC Mill Slot Long Shank DLCSLTLS
Nachi-Fujikoshi
Capable of continuous high-efficiency machining of aluminum alloys from hole drilling to groove cutting. Suitable for deep engraving work.
Days to Ship: | 8 Days or more |
---|
GSX MILL 3-Flute Blade 2D GSX3C-2D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: | 8 Days or more |
---|
GSX MILL Slot 1.5D GSXSLT-1.5D
Nachi-Fujikoshi
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Days to Ship: | 8 Days or more |
---|
GSX MILL 4-Flute Blade 1D GSX4C-1D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for side surface machining.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Capable of continuous high-performance drilling of holes and grooving with a wide range of materials, from raw materials to hardened materials.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
General purpose carbide end mill. Suitable for side surface machining.
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
GSX MILL 4-Flute Blade 2.5D P Type GSX4P-2.5D
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Days to Ship: | 8 Days or more |
---|
GSX MILL 2-Flute Blade 1.5D GSX2C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Days to Ship: | 8 Days or more |
---|
GSX MILL VL Long Shank 1.5D GSXVLLS4-1.5D
Nachi-Fujikoshi
[Features]
· Minimizes chattering during machining on vertical walls or deep engraving, allowing highly efficient high quality machining to be performed.
· For steel.
Days to Ship: | 8 Days or more |
---|
GSX MILL VL Multi-Edged 2.5D GSXVL6-2.5D
Nachi-Fujikoshi
[Features]
· Unequal division and unequal lead enable high-speed and high-grade processing.
· For steel.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
Brand | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | ||||||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 1 ~ 20 | 2 ~ 20 | 3 ~ 20 | 1 ~ 18 | 0.2 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 3 ~ 20 | 3 ~ 20 | 6 ~ 20 | 3 ~ 20 | 0.2 ~ 20 | 1 ~ 20 | 0.1 ~ 2 | 1 ~ 2 | 1 ~ 20 | 3 ~ 16 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 2 ~ 32 | 3 ~ 20 | 1 ~ 20 | 1 ~ 20 | 2 ~ 20 | 1 ~ 20 | 1 ~ 16 | 1 ~ 20 | 2 ~ 25 | 1 ~ 16 | 2 ~ 20 | 2 ~ 20 | 1 ~ 20 | 1 ~ 20 | 3 ~ 20 | 6 ~ 20 |
Work Material | Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] | Stainless Steel[◎] / Titanium[◎] | Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] |
Flute Length (ℓ)(mm) | 3 ~ 38 | 10 ~ 56 | 12 ~ 56 | 2.5 ~ 32 | 0.5 ~ 50 | 2.5 ~ 50 | 2 ~ 40 | 1.5 ~ 30 | 2.5 ~ 50 | 3 ~ 60 | 7.5 ~ 50 | 7.5 ~ 50 | 25 ~ 75 | 4.5 ~ 30 | 0.4 ~ 38 | 1.5 ~ 30 | 0.2 ~ 6 | 3 ~ 6 | 3 ~ 38 | 8 ~ 32 | 3 ~ 60 | 4 ~ 80 | 2 ~ 40 | 4 ~ 80 | 6 ~ 70 | 18 ~ 75 | 3 ~ 38 | 3 ~ 38 | 3 ~ 30 | 2.5 ~ 40 | 1.5 ~ 24 | 1 ~ 20 | 6 ~ 45 | 3 ~ 32 | 6 ~ 38 | 6 ~ 38 | 2.5 ~ 50 | 1.5 ~ 30 | 4.5 ~ 30 | 15 ~ 50 |
Number of Flutes(sheet) | 4 ~ 8 | 4 | 2 | 4 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 4 | 6 ~ 8 | 4 | 2 | 4 | 2 | 4 | 2 | 3 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 2 | 3 | 3 | 3 | 4 | 4 | 3 | 4 | 2 | 4 | 2 | 4 | 6 |
Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Coating | TiAlN | TiAlN | DLC | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | - | - | DLC | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | - | DLC | DLC | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | - | - | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) |
Link Diameter (d)(mm) | 6 ~ 20 | 4 ~ 20 | 6 ~ 20 | 3 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 3 ~ 20 | 4 ~ 20 | 3 ~ 4 | 4 | 4 ~ 20 | 6 ~ 16 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 32 | 6 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 16 | 4 ~ 20 | 4 ~ 25 | 4 ~ 16 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 |
Overall Length (L)(mm) | 50 ~ 100 | 50 ~ 125 | 50 ~ 125 | 38 ~ 100 | 40 ~ 100 | 40 ~ 100 | 40 ~ 100 | 40 ~ 100 | 40 ~ 100 | 40 ~ 120 | 45 ~ 100 | 45 ~ 100 | 70 ~ 155 | 60 ~ 200 | 38 ~ 100 | 40 ~ 100 | 40 | 40 | 40 ~ 100 | 50 ~ 115 | 40 ~ 120 | 40 ~ 140 | 40 ~ 100 | 40 ~ 140 | 50 ~ 175 | 60 ~ 155 | 50 ~ 100 | 40 ~ 100 | 50 ~ 200 | 40 ~ 100 | 40 ~ 90 | 40 ~ 100 | 40 ~ 120 | 50 ~ 115 | 50 ~ 100 | 50 ~ 100 | 40 ~ 100 | 40 ~ 100 | 60 ~ 160 | 50 ~ 100 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | 12 ~ 82 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ~ 82 | - | - | - | - | - | - | - | - | - | 15 ~ 100 | - |
Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Side Surface | Side Surface |
Flute Shape | With Lead | With Lead | Sharp Corner | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | With Lead | Sharp Corner | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | Sharp Corner | With Lead | With Lead | With Lead | With Lead | Sharp Corner | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | Sharp Corner | Sharp Corner |
Helix Angle (θ) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | - | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Uneven Lead | Uneven Lead |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy