(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/0.01mm Designation Model
MISUMI
Blade diameter can be selected from extensive lineup of flute lengths in 0.01 mm increments
Days to Ship: | 9 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
The price of the low-cost classic XAL Series has been further reduced. [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model
MISUMI
Misumi's unique lineup of fine blade length is available at attractive low prices [C-Value]
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model
MISUMI
The lineup of fine intermediate blade length between short and regular is available only in Misumi
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model
MISUMI
A low blade flat type with the blade shape that's ideal for counter boring
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model
MISUMI
Achieves high-efficiency machining with the 3-geometry that's emphasized the rigidity.
Days to Ship: | 8 Days or more |
---|
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model
MISUMI
The CrN coating with excellent lubricity exhibits power in copper electrode processing
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model
MISUMI
A long blade length type that is compatible with deep engraving [C-Value]
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/5D Flute Length (Extra Long) Model
MISUMI
Perform one-shot standing-wall machining at high surface accuracy. Now offering a flute length of 5 times the outer diameter at ultra-low price (C-Value)
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 2-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
A short blade length (stub) series that's ideal for high-speed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
2-blade regular size that can be used in a wide range of applications
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model
MISUMI
Lineups of fine intermediate blade length between regular and long are available only in MISUMI.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model
MISUMI
Compatible with Deep Engraving.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model
MISUMI
The standard key grooving end mills that are sorted by tolerance have been significantly reduced in price
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
Excellent in general versatility, it is a 2D blade length type that can be used in a wide range of applications
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Roughing End Mill for Stainless Steel Machining
MISUMI
Ideal for the medium-finishing of difficult-to-cut SUS, etc.
Days to Ship: | 8 Days or more |
---|
Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining [C-Value]
Days to Ship: | 8 Days or more |
---|
Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining [C-Value]
Days to Ship: | 8 Days or more |
---|
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model
MISUMI
Short blade length that suppresses chattering
Days to Ship: | 8 Days or more |
---|
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model
MISUMI
The cutting performance of aluminum has been improved by the combination of sharp edge and DLC coating
Days to Ship: | 8 Days or more |
---|
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model
MISUMI
4D blade length type that's ideal for deep engraving
Days to Ship: | 8 Days or more |
---|
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model
MISUMI
The unique tip pocket shape improves the discharging of chips
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub Model
MISUMI
A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model SEC-ALHEM2S
MISUMI
A non-coated type that does not impair the sharpness of the blade
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model SEC-ALHEM2R
MISUMI
Affordable, non-coated type of the Aluminum Processing Series
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model
MISUMI
The large rake angle prevents the built-up edge that's unique to aluminum
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute/2D Flute Length (Short) Model
MISUMI
3-blade structure that's excellent in discharging chips
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub, Long Shank Model
MISUMI
2 types that are recommended in the standing-wall machining of aluminum
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub, Slim Shank Model
MISUMI
2 types that are recommended in the standing-wall machining of aluminum
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model
MISUMI
A non-coated type that has achieved both the cost reduction and processing performance
Days to Ship: | 8 Days or more |
---|
Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute/Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price [C-Value]
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Graphite Machining, 2-Flute/Non-Coated, Long Model
MISUMI
The price of the non-coated product with excellent cost performance has been further reduced
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Resin Machining, 2-Flute/Regular Model
MISUMI
The cutting edge with an emphasis on sharpness is ideal for resin machining
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
Stub blade length items that are ideal for grooving are available at incredibly low prices [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine blade length is available at attractive low prices[C-Value]
Days to Ship: | 8 Days or more |
---|
Carbide Blade Neck Relief End Mill, 2-Flute/Short Model
MISUMI
Blade relief type is unaffected by interference from tools
Days to Ship: | 10 Days or more |
---|
Carbide Blade Neck Relief End Mill, 2-Flute/Regular Model
MISUMI
Blade relief type is unaffected by interference from tools
Days to Ship: | 10 Days or more |
---|
Non-Coated TS Coated Carbide 0.1mm Unit Corner C Designated End Mill
MISUMI
Corner C can be specified in 0.1 mm increments (coating may be supported)
Days to Ship: | 10 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model XEL-ALHEM2S
MISUMI
Now offering an ultra-affordable aluminum processing end mills with outstanding machined surface accuracy (C-Value)
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model XEL-ALHEM2R
MISUMI
Perform one-shot standing-wall machining at high surface accuracy. Now offering a flute length of 3 times the outer diameter at ultra-low price (C-Value)
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model | TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model | TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model | Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model | XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model | Carbide Square End Mill for Aluminum Machining, 2-Flute/5D Flute Length (Extra Long) Model | TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model | TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model | TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model | Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Roughing End Mill for Stainless Steel Machining | Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/Regular Model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/Regular Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model | Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub Model | Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model SEC-ALHEM2S | Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model SEC-ALHEM2R | Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model | Carbide Square End Mill for Aluminum Machining, 3-Flute/2D Flute Length (Short) Model | Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub, Long Shank Model | Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub, Slim Shank Model | Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute/Long Model | Carbide Square End Mill for Graphite Machining, 2-Flute/Non-Coated, Long Model | Carbide Square End Mill for Resin Machining, 2-Flute/Regular Model | XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model | XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model | Non-Coated TS Coated Carbide 0.1mm Unit Corner C Designated End Mill | Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model XEL-ALHEM2S | Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model XEL-ALHEM2R | ||||
Days to Ship | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flute Diameter (D)(φ) | 1.5 ~ 25 | 3.15 ~ 19.99 | 0.1 ~ 20 | 0.3 ~ 20 | 0.5 ~ 12 | 3 ~ 16 | 0.5 ~ 20 | 0.5 ~ 12 | 0.5 ~ 12 | 3 ~ 12 | 1 ~ 20 | 0.5 ~ 12 | 0.5 ~ 20 | 0.1 ~ 20 | 0.2 ~ 20 | 0.5 ~ 12 | 1 ~ 12 | 2 ~ 14 | 0.2 ~ 12 | 0.2 ~ 12 | 6 ~ 20 | 1 ~ 12 | 1 ~ 12 | 1 ~ 20 | 0.5 ~ 20 | 3 ~ 12 | 0.5 ~ 20 | 1 ~ 12 | 0.5 ~ 20 | 0.5 ~ 20 | 3 ~ 12 | 1 ~ 12 | 5 ~ 22 | 6.2 ~ 16.2 | 0.5 ~ 20 | 1 ~ 12 | 1 ~ 12 | 0.3 ~ 16 | 0.5 ~ 20 | 1 ~ 12 | 6 ~ 12 | 6 ~ 12 | 2 ~ 20 | 0.5 ~ 20 | 0.5 ~ 20 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○/◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] |
Flute Length (ℓ)(mm) | 6 ~ 120 | 3.5 ~ 48 | 0.2 ~ 40 | 0.9 ~ 60 | 1.25 ~ 30 | 8 ~ 32 | 1.5 ~ 60 | 1.5 ~ 36 | 2 ~ 48 | 15 ~ 60 | 2.5 ~ 38 | 0.5 ~ 12 | 0.75 ~ 30 | 0.2 ~ 40 | 0.6 ~ 60 | 1.75 ~ 42 | 4 ~ 48 | 3 ~ 21 | 0.4 ~ 24 | 0.6 ~ 36 | 15 ~ 50 | 3 ~ 36 | 3 ~ 36 | 2 ~ 40 | 1.5 ~ 60 | 5 ~ 48 | 1.5 ~ 60 | 1.5 ~ 18 | 1 ~ 40 | 1.5 ~ 60 | 5 ~ 48 | 2 ~ 24 | 9 ~ 33 | 9 ~ 24 | 1.5 ~ 60 | 5 ~ 60 | 5 ~ 60 | 0.9 ~ 48 | 0.75 ~ 30 | 2.5 ~ 30 | - | - | 3 ~ 60 | 1 ~ 40 | 1.5 ~ 60 |
Number of Flutes(sheet) | 4 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 3 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Coating | - | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | CrN | For General Steel (AlCrN etc.) | Non-Coated | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | Diamond Coat | Diamond Coat | DLC | DLC | DLC | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Diamond Coat | Non-Coated | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) / Non-Coated | Non-Coated | Non-Coated |
Link Diameter (d)(mm) | 4 ~ 25 | 6 ~ 20 | 3 ~ 20 | 3 ~ 20 | 4 ~ 12 | 6 ~ 16 | 4 ~ 20 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 3 ~ 20 | 3 ~ 20 | 4 ~ 12 | 4 ~ 12 | 6 ~ 16 | 3 ~ 12 | 3 ~ 12 | 6 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 4 ~ 12 | 4 ~ 20 | 6 ~ 16 | 4 ~ 20 | 4 ~ 12 | 4 ~ 12 | 3 ~ 16 | 4 ~ 20 | 4 ~ 12 | 6 ~ 12 | 6 ~ 12 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 |
Overall Length (L)(mm) | 60 ~ 250 | 40 ~ 105 | 40 ~ 110 | 40 ~ 110 | 45 ~ 85 | 50 ~ 110 | 40 ~ 130 | 50 ~ 90 | 45 ~ 100 | 60 ~ 130 | 40 ~ 105 | 40 ~ 65 | 40 ~ 105 | 35 ~ 110 | 40 ~ 130 | 45 ~ 95 | 45 ~ 100 | 45 ~ 75 | 35 ~ 75 | 40 ~ 85 | 60 ~ 130 | 40 ~ 80 | 40 ~ 80 | 40 ~ 110 | 40 ~ 130 | 60 ~ 100 | 40 ~ 130 | 40 ~ 80 | 40 ~ 110 | 40 ~ 130 | 60 ~ 100 | 40 ~ 80 | 80 ~ 200 | 80 ~ 180 | 50 ~ 130 | 75 ~ 200 | 75 ~ 200 | 45 ~ 110 | 40 ~ 110 | 45 ~ 85 | 45 ~ 75 | 60 ~ 85 | 40 ~ 130 | 40 ~ 110 | 40 ~ 130 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | 20 ~ 55 | - | 23 ~ 92 | - | - | - | - | - | - | 17 ~ 73 | 23 ~ 92 | 26 ~ 65 | 29 ~ 76 | - | 17 ~ 45 | 23 ~ 55 | - | - | - | 17 ~ 73 | 23 ~ 92 | 29 ~ 70 | 23 ~ 92 | 3 ~ 36 | 17 ~ 73 | 23 ~ 92 | 29 ~ 70 | 17 ~ 50 | - | - | - | 10 ~ 85 | 10 ~ 85 | - | - | - | - | - | - | - | - |
Processing Applications | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
Flute Shape | - | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | With Lead | Sharp Corner | Sharp Corner / With Lead | - | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | C Surface | Sharp Corner | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | Ultra-Small R | Ultra-Small R | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | - | - |
Helix Angle (θ) | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) |
Loading...
[5-60/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy