While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

MISUMI Carbide Square End Mill（Helix Angle (θ)：Standard Helix (30 to 40°)）

Search by specifying the lower class category

54 items

: 30; 45; 60

Days to Ship	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 13 Days or Less

XAL Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model

MISUMI

Popular XAL Series with the 4-blade structure that's ideal for side milling has been further reduced in price. [C-Value]

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more

Show Stock Products
XAC Series Carbide Square End Mill, 4-Flute/Short Model

MISUMI

Standard TiAlN coat [C-Value] series

Volume Discount

TiAlN

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model

MISUMI

The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 8 Days or more
TSC Series Carbide Roughing End Mill for Stainless Steel Machining

MISUMI

Ideal for the medium-finishing of difficult-to-cut SUS, etc.

Volume Discount

TS

SUS

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model

MISUMI

Significantly reduces the roughing time of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model

MISUMI

The price of the low-cost classic XAL Series has been further reduced. [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model

MISUMI

Misumi's unique lineup of fine blade length is available at attractive low prices [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAC Series Carbide Square End Mill, 2-Flute/Short Model

MISUMI

Standard TiAlN coat [C-Value] series

Volume Discount

TiAlN

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
XAC Series Carbide Square End Mill, 4-Flute/Long Model

MISUMI

User friendly TiAlN coated series with long blade length [C-Value]

Volume Discount

TiAlN

General Steel

4 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model

MISUMI

In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model

MISUMI

A short blade length (stub) series that's ideal for high-speed machining

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model

MISUMI

In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model

MISUMI

The lineup of fine intermediate blade length between short and regular is available only in Misumi

Volume Discount

TS

General Steel

2 Flutes

SR
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model

MISUMI

2-blade regular size that can be used in a wide range of applications

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model

MISUMI

Lineups of fine intermediate blade length between regular and long are available only in MISUMI.

Volume Discount

TS

General Steel

2 Flutes

RL
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model

MISUMI

Compatible with Deep Engraving.

Volume Discount

TS

General Steel

2 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model

MISUMI

Shrink-Fit Chuck Supported Type

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/1.5D Flute Length (Stub) Model

MISUMI

Also exerts effectiveness in high-speed machining

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model

MISUMI

26 Sizes of Standard Blade Length

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model

MISUMI

The fine intermediate blade length between short and regular that's unique to Misumi

Volume Discount

TS

General Steel

4 Flutes

SR
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model

MISUMI

A standard regular size with high versatility

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: Same day or more

Show Stock Products
TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model

MISUMI

The fine intermediate blade length between regular and long that's unique to Misumi

Volume Discount

TS

General Steel

4 Flutes

RL
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model

MISUMI

Compatible with deeper side milling

Volume Discount

TS

General Steel

4 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model

MISUMI

A low blade flat type with the blade shape that's ideal for counter boring

Volume Discount

Price Reduction

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 8 Days or more
Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model

MISUMI

Excellent in general versatility, it is a 2D blade length type that can be used in a wide range of applications

Volume Discount

Non-Coated

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model

MISUMI

The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas

Volume Discount

Non-Coated

General Steel

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model

MISUMI

The 2D blade length type with high versatility achieves high-precision processing including grooving

Volume Discount

Non-Coated

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model

MISUMI

The 3D blade length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

Volume Discount

Non-Coated

General Steel

4 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model

MISUMI

Achieves both high levels of machining precision and reduction of processing time in side milling

Volume Discount

Non-Coated

General Steel

4 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Long Neck Square End Mill, 4-Flute/Long Neck Model

MISUMI

Classic 4-blade long neck is available in extensive sizes and low price

Volume Discount

Price Reduction

TS

General Steel

4 Flutes
Days to Ship: 8 Days or more
TSC Series Carbide Long Neck Square End Mill, 2-Flute/Long Neck Model

MISUMI

Classic 2-blade long neck is available in extensive sizes and low price

Volume Discount

Price Reduction

TS

General Steel

2 Flutes
Days to Ship: 8 Days or more
DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model

MISUMI

Popular DLC coated type of aluminum roughing

Volume Discount

DLC

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Long Neck Model

MISUMI

A ribbing type with the cutting edge that's suitable for copper machining

Volume Discount

Price Reduction

CrN

Copper

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute/Long Model

MISUMI

The premium diamond coated products are available at the industry's lowest price [C-Value]

Volume Discount

DIA

Graphite

2 Flutes

L (Long)
Days to Ship: 8 Days or more
Carbide Square End Mill for Graphite Machining, 2-Flute/Non-Coated, Long Model

MISUMI

The price of the non-coated product with excellent cost performance has been further reduced

Volume Discount

Price Reduction

Non-Coated

Graphite

2 Flutes

L (Long)
Days to Ship: 8 Days or more
Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute/Long Model

MISUMI

The premium diamond coated products are available at the industry's lowest price [C-Value]

Volume Discount

DIA

Graphite

4 Flutes

L (Long)
Days to Ship: 8 Days or more
Carbide Square End Mill for Graphite Machining, 4-Flute/Non-Coated, Long Model

MISUMI

The price of the non-coated product with excellent cost performance has been further reduced

Volume Discount

Price Reduction

Non-Coated

Graphite

4 Flutes

L (Long)
Days to Ship: 8 Days or more
Carbide Square End Mill for Resin Machining, 2-Flute/Regular Model

MISUMI

The cutting edge with an emphasis on sharpness is ideal for resin machining

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Square End Mill for Resin Machining, 2-Flute/Extra Long Model

MISUMI

Extra-long type for resin that's capable of deep processing in the first shot

Volume Discount

Non-Coated

Resin

2 Flutes

EXL (Extra Long)
Days to Ship: 8 Days or more
Carbide Square End Mill for Resin Machining, 2-Flute/Regular, Long Shank Model

MISUMI

Available in 10 sizes including the long shank type

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Long Neck Square End Mill for Resin Machining, 2-Flute/Stub, Long Neck Model

MISUMI

End mill for resin that's capable of deep engraving

Volume Discount

Non-Coated

Resin

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model

MISUMI

Stub blade length items that are ideal for grooving are available at incredibly low prices [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model

MISUMI

The Misumi's unique lineup of fine blade length is available at attractive low prices[C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model

MISUMI

A long blade length type that is compatible with deep engraving [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model

MISUMI

The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 8 Days or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
Days to Ship
Specifications
Flute Diameter (D)(φ)
Work Material
Flute Length (ℓ)(mm)
Number of Flutes(sheet)
Model
Coating
Link Diameter (d)(mm)
Overall Length (L)(mm)
Length Under Neck (ℓ1)(mm)
Processing Applications
Flute Shape
Helix Angle (θ)

																								Price Reduction						Price Reduction	Price Reduction		Price Reduction		Price Reduction		Price Reduction
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	XAL Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model	XAC Series Carbide Square End Mill, 4-Flute/Short Model	XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model	TSC Series Carbide Roughing End Mill for Stainless Steel Machining	Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model	XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model	XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model	XAC Series Carbide Square End Mill, 2-Flute/Short Model	XAC Series Carbide Square End Mill, 4-Flute/Long Model	TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model	TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model	TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model	TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model	TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model	TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 4-Flute/1.5D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model	TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model	TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model	TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model	TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model	TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model	Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model	Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model	Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model	Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model	Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model	TSC Series Carbide Long Neck Square End Mill, 4-Flute/Long Neck Model	TSC Series Carbide Long Neck Square End Mill, 2-Flute/Long Neck Model	DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model	CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Long Neck Model	Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute/Long Model	Carbide Square End Mill for Graphite Machining, 2-Flute/Non-Coated, Long Model	Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute/Long Model	Carbide Square End Mill for Graphite Machining, 4-Flute/Non-Coated, Long Model	Carbide Square End Mill for Resin Machining, 2-Flute/Regular Model	Carbide Square End Mill for Resin Machining, 2-Flute/Extra Long Model	Carbide Square End Mill for Resin Machining, 2-Flute/Regular, Long Shank Model	Carbide Long Neck Square End Mill for Resin Machining, 2-Flute/Stub, Long Neck Model	XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model	XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model	XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model	XAL Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model
Days to Ship	Same day or more Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more
Specifications	XAL General Steel 4 Flutes	TiAlN General Steel 4 Flutes S (Short)	XAL General Steel 4 Flutes	TS SUS 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes SR	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes RL	TS General Steel 2 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes RL	TS General Steel 4 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	Non-Coated General Steel 2 Flutes S (Short)	Non-Coated General Steel 2 Flutes R (Regular)	Non-Coated General Steel 4 Flutes S (Short)	Non-Coated General Steel 4 Flutes R (Regular)	Non-Coated General Steel 4 Flutes L (Long)	TS General Steel 4 Flutes	TS General Steel 2 Flutes	DLC Aluminum 3 Flutes R (Regular)	CrN Copper 2 Flutes B (Stub)	DIA Graphite 2 Flutes L (Long)	Non-Coated Graphite 2 Flutes L (Long)	DIA Graphite 4 Flutes L (Long)	Non-Coated Graphite 4 Flutes L (Long)	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated Resin 2 Flutes EXL (Extra Long)	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated Resin 2 Flutes B (Stub)	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes
Flute Diameter (D)(φ)	1 ～ 20	2 ～ 20	1 ～ 20	6 ～ 20	5 ～ 20	0.1 ～ 20	0.1 ～ 20	1 ～ 20	3 ～ 12	0.5 ～ 12	0.5 ～ 20	0.1 ～ 20	0.5 ～ 12	0.2 ～ 20	0.5 ～ 12	1 ～ 12	2 ～ 12	2 ～ 12	1 ～ 20	1 ～ 16	1 ～ 20	1 ～ 16	1 ～ 12	3 ～ 16	0.2 ～ 12	0.2 ～ 12	1 ～ 20	2 ～ 20	1 ～ 12	1 ～ 6	0.1 ～ 6	5 ～ 20	0.5 ～ 3	1 ～ 12	1 ～ 12	2 ～ 12	2 ～ 12	0.3 ～ 16	0.3 ～ 12	1 ～ 10	0.3 ～ 6	0.5 ～ 20	1 ～ 12	0.5 ～ 12	1.5 ～ 16
Work Material	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]
Flute Length (ℓ)(mm)	2 ～ 40	6 ～ 38	3 ～ 60	15 ～ 50	15 ～ 45	0.2 ～ 40	0.3 ～ 60	2.5 ～ 38	12 ～ 30	0.5 ～ 12	0.75 ～ 30	0.2 ～ 40	1.25 ～ 30	0.6 ～ 60	1.75 ～ 42	4 ～ 48	2 ～ 12	3 ～ 18	2 ～ 40	2.5 ～ 40	3 ～ 60	3.5 ～ 56	4 ～ 48	8 ～ 32	0.4 ～ 24	0.6 ～ 36	2 ～ 40	5 ～ 60	4 ～ 48	1.5 ～ 9	0.2 ～ 10	15 ～ 45	0.7 ～ 4.5	5 ～ 60	5 ～ 60	10 ～ 60	10 ～ 60	0.9 ～ 48	1.5 ～ 48	3 ～ 20	0.6 ～ 15	0.75 ～ 30	2.5 ～ 30	2 ～ 48	3.75 ～ 40
Number of Flutes(sheet)	4	4	4	3	3	2	2	2	4	2	2	2	2	2	2	2	4	4	4	4	4	4	4	3	2	2	4	4	4	4	2	3	2	2	2	4	4	2	2	2	2	2	2	2	4
Model	Square	Square	Square	Roughing	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Long Neck Square	Long Neck Square	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Long Neck Square	Square	Square	Square	Square
Coating	For General Steel (AlCrN etc.)	TiAlN	For General Steel (AlCrN etc.)	For High Hardness (Silicone-Based)	Non-Coated	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	TiAlN	TiAlN	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	DLC	CrN	Diamond Coat	Non-Coated	Diamond Coat	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)
Link Diameter (d)(mm)	4 ～ 20	4 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	3 ～ 20	3 ～ 20	4 ～ 20	6 ～ 12	4 ～ 12	4 ～ 20	3 ～ 20	4 ～ 12	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 16	4 ～ 20	6 ～ 16	4 ～ 12	6 ～ 16	3 ～ 12	3 ～ 12	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 6	4 ～ 6	6 ～ 20	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	3 ～ 16	3 ～ 12	1 ～ 10	3 ～ 6	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 16
Overall Length (L)(mm)	40 ～ 110	40 ～ 105	45 ～ 130	60 ～ 130	57 ～ 100	40 ～ 110	40 ～ 110	40 ～ 105	50 ～ 90	40 ～ 65	40 ～ 105	35 ～ 110	45 ～ 85	40 ～ 130	45 ～ 95	45 ～ 100	40 ～ 65	40 ～ 75	40 ～ 110	45 ～ 105	45 ～ 130	45 ～ 120	45 ～ 100	50 ～ 110	35 ～ 75	40 ～ 85	40 ～ 110	45 ～ 130	45 ～ 100	50 ～ 100	40 ～ 100	57 ～ 100	50 ～ 100	75 ～ 200	75 ～ 200	75 ～ 200	75 ～ 200	45 ～ 110	40 ～ 110	65 ～ 180	50 ～ 80	40 ～ 110	45 ～ 85	45 ～ 100	45 ～ 105
Length Under Neck (ℓ1)(mm)	-	-	-	-	20 ～ 70	-	-	-	-	-	-	17 ～ 73	20 ～ 55	23 ～ 92	26 ～ 65	29 ～ 76	-	-	15 ～ 73	20 ～ 73	23 ～ 92	26 ～ 88	29 ～ 70	-	17 ～ 45	23 ～ 55	17 ～ 73	23 ～ 92	29 ～ 70	4 ～ 50	0.3 ～ 60	20 ～ 70	2 ～ 40	10 ～ 85	10 ～ 85	20 ～ 85	20 ～ 85	-	-	-	2.5 ～ 52	-	-	-	-
Processing Applications	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting
Flute Shape	Sharp Corner / With Lead	Sharp Corner	Sharp Corner / With Lead	C Surface	Ultra-Small R	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner	Sharp Corner	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Ultra-Small R	Sharp Corner	Sharp Corner	Sharp Corner	Sharp Corner	Sharp Corner	Sharp Corner	-	Sharp Corner	Sharp Corner	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead
Helix Angle (θ)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)

Configure

Stock

- Show Stock Products
Clear

Specification/Dimensions

Metric / Inch
- metric
Clear

Flute Diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6H
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8H
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10H
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12H
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- High-Hardness Steel – HRC60
- High-Hardness Steel – HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Flute Length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 12～12.9
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.4
  - 26.5
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.5
  - 27.6
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57～57.5
  - 57
  - 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 62
- 63
- 64
- 65
- 66
- 67
- 70
- 72
- 75
- 76
- 78
- 80
- 82
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 115
- 120
- 125
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Number of Flutes(sheet)
1

2

3

4

5

6

Outer Diameter 6/Bottom Blade 3

7

8

Outer Diameter 8/Bottom Blade 4

10

Outer Diameter 10/Bottom Blade 5

12

14

Outer Diameter 14/Bottom Blade 7

16

Outer Diameter 16/Bottom Blade 8

Bur End
Clear

Model
- Square
- Roughing
- Long Neck Square
- Highly-Helical
Clear

Coating
- For High Hardness (Silicone-Based)
- TiAlN
- For General Steel (AlCrN etc.)
- TiCN
- TiN
- DLC
- CrN
- Diamond Coat
- Non-Coated
- DG
Details

Clear

Link Diameter (d)(mm)
1

1.5

2

3

3.175

4

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

17

18

20

22

24

25

30

32

42
Drawing

Clear

Overall Length (L)(mm)
35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

57

58

60

62

63

63.5

64

65

66

68

69

70

72

73

74

75

76

78

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

100

104

105

107

108

109

110

111

113

115

118

120

121

123

125

126

128

130

135

140

145

150

155

160

165

170

175

180

185

190

200

210

215

220

225

230

240

250

260

265

270

280

300

310

320

350

800
Drawing

Clear

Length Under Neck (ℓ1)(mm)
- 0.1～0.8
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
- 1～1.8
  - 1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9
- 10～10.5
  - 10
  - 10.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17.5
- 18
- 19.6
- 20
- 21
- 22
- 23
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35～35.3
  - 35
  - 35.3
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 57
- 60
- 62
- 63
- 64
- 65
- 66
- 70
- 74
- 75
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 108
- 120
- 125
- 130
- 140
- 150
- 200
[8-92/1mm Unit(s)]

Drawing

Clear

Processing Applications
- Flat Surface
- Side Surface
- Groove
- Thrust (Z-Feed)
- Inclined Cutting
- Countersunk
Images

Clear

Flute Shape
- Sharp Corner
- With Lead
- C Surface
- Ultra-Small R
Images

Clear

Helix Angle (θ)
- Without Torsion
- Weak Helix (15 to 25°)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
- Uneven Lead
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (54)
- C-Value ()
- OSG (62)
- NS TOOL (42)
- Nachi-Fujikoshi (32)
- DIJET (24)
- OKAZAKI (21)
- UNION TOOL (16)
- KYOWASEIKO (15)
- ASAHI TOOLS (14)
- 7 LEADERS (12)
- GUHRING (12)
- KYOCERA (11)
- S&K (7)
- EIKOSHA (6)
- SANDVIK (4)
- Poulten&Graf (2)
- GCT (1)
- TAIYO TOOL (1)
- PROCHI (0)
- ATOM (0)
- VAN HOORN (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Carbide Square End Mill

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

MISUMI Carbide Square End Mill（Helix Angle (θ)：Standard Helix (30 to 40°)）

Search by specifying the lower class category

Configure

Stock

Specification/Dimensions

Metric / Inch

Flute Diameter (D)(φ)

Work Material

Flute Length (ℓ)(mm)

Number of Flutes(sheet)

Model

Coating

Link Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Flute Shape

Helix Angle (θ)

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Square End Mill

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)