(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
LSU Long Shank Ultra 30 End Mill AH10
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
SAC2 Solid 2-Blade A Cut End Mill MA
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Blade Diameter Tolerance (mm): 0~-0.03
Days to Ship: | 8 Days or more |
---|
SAC2 Solid Long 2-Blade A Cut End Mill MA
ASAHI TOOLS
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
SAC4 Solid 4-Blade A Cut End Mill MA
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
TAC2, 2-Flute, A-Cut End Mill G2
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
TAC2 Long 2-Flute A Cut End Mill G2
ASAHI TOOLS
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
TAC4, 4-Flute, A-Cut End Mill MA
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
SAL2 Solid Alumic 2000 End Mill AH10
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Blade Diameter Tolerance (mm): +0.05~0
Days to Ship: | 8 Days or more |
---|
UEM Long Ultra 30 End Mill AH10
ASAHI TOOLS
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Blade Diameter Tolerance (mm): +0.05~0
Days to Ship: | 8 Days or more |
---|
LSU Special Long Shank Ultra 30 End Mill AH10
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Without Torsion
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Blade Shape: Straight edge
Days to Ship: | 8 Days or more |
---|
SLE2 Long Shank Slotting End Mill G2
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Without Torsion
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Blade Shape: Straight edge
Days to Ship: | 8 Days or more |
---|
SLE2 Special Long Shank Slotting End Mill G2
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Without Torsion
•Coating: Non-Coated
•Flute Length (ℓ) (mm): 21
•Link Diameter (d) (mm): 32
Days to Ship: | 8 Days or more |
---|
ASAHI TOOLS
•Model: Roughing
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
ASAHI TOOLS
•Model: Roughing
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
TAC2, 2-Flute, A-Cut End Mill MA
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
TAC2 Long 2-Flute A Cut End Mill MA
ASAHI TOOLS
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Flute Diameter D (f): 22
Days to Ship: | 8 Days or more |
---|
TAL2, 2-Flute, Alumik 2000 End Mill AH10
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
Brand | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | |||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 13 ~ 40 | 1 ~ 30 | 3 ~ 20 | 3 ~ 20 | 10 ~ 60 | 10 ~ 50 | 15 ~ 50 | 3 ~ 13 | 13 ~ 50 | 13 ~ 50 | 13 ~ 40 | 3 ~ 50 | 3 ~ 30 | 5 ~ 30 | 20 ~ 40 | 20 ~ 40 | 10 ~ 40 | 22 | 14 ~ 50 |
Work Material | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] |
Flute Length (ℓ)(mm) | 20 ~ 50 | 3 ~ 40 | 20 ~ 70 | 8 ~ 40 | 20 ~ 70 | 30 ~ 150 | 25 ~ 60 | 8 ~ 25 | 20 ~ 50 | 43 ~ 103 | 20 ~ 50 | 8 ~ 35 | 8 ~ 21 | 21 | 40 ~ 80 | 60 ~ 120 | 20 ~ 50 | 60 | 25 ~ 60 |
Number of Flutes(sheet) | 2 | 2 | 2 | 4 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 |
Model | Square | Square | Long Neck Square | Square | Square | Long Neck Square | Square | Square | Square | Long Neck Square | Square | Square | Square | Square | Roughing | Roughing | Square | Long Neck Square | Square |
Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
Link Diameter (d)(mm) | 16 ~ 42 | 6 ~ 30 | 6 ~ 20 | 6 ~ 20 | 12 ~ 42 | 12 ~ 42 | 16 ~ 42 | 6 ~ 12 | 12 ~ 42 | 12 ~ 42 | 16 ~ 42 | 10 ~ 32 | 10 ~ 32 | 32 | 20 ~ 42 | 20 ~ 42 | 12 ~ 32 | 25 | 16 ~ 32 |
Overall Length (L)(mm) | 140 ~ 270 | 45 ~ 100 | 60 ~ 140 | 45 ~ 100 | 70 ~ 160 | 80 ~ 250 | 80 ~ 160 | 45 ~ 80 | 100 ~ 170 | 125 ~ 225 | 180 ~ 320 | 55 ~ 180 | 100 ~ 220 | 150 ~ 350 | 130 ~ 180 | 150 ~ 220 | 70 ~ 130 | 130 | 95 ~ 160 |
Length Under Neck (ℓ1)(mm) | 80 ~ 150 | - | - | - | - | - | - | - | - | - | 120 ~ 200 | 15 ~ 80 | 15 ~ 41 | 15 ~ 41 | - | - | - | - | - |
Processing Applications | Side Surface / Groove / Countersunk | Side Surface / Groove / Countersunk | Side Surface / Groove / Countersunk | Side Surface / Groove | Side Surface / Groove / Countersunk | Side Surface / Groove / Countersunk | Side Surface / Groove | Side Surface / Groove / Countersunk | Side Surface / Groove | Side Surface / Groove | Side Surface / Groove / Countersunk | Flat Surface / Countersunk | Flat Surface / Countersunk | Flat Surface / Countersunk | Side Surface / Groove | Side Surface / Groove | Side Surface / Groove / Countersunk | Side Surface / Groove / Countersunk | Side Surface / Groove / Countersunk |
Flute Shape | C Surface | Sharp Corner / With Lead | With Lead | With Lead | C Surface | With Lead | C Surface | Sharp Corner | Sharp Corner | Sharp Corner | C Surface | - | - | - | C Surface | C Surface | C Surface | With Lead | Sharp Corner |
Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Without Torsion | Without Torsion | Without Torsion | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy