(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CAP-EBD
OSG
Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type for Graphite DG-EBD
OSG
End mill with diamond coating dedicated for graphite.
Days to Ship: | 8 Days or more |
---|
2-Flute Slim Shank Ball End Type FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End, Miniature Type CRN-EBD-3
OSG
A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End, Miniature Type FX-MG-EBD-3
OSG
FX coating and high-toughness ultra-hard material enable a wide range of machining
Days to Ship: | 8 Days or more |
---|
OSG
Excellent for machining high-hardness materials and cast iron
Days to Ship: | 8 Days or more |
---|
OSG
Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.
Days to Ship: | 8 Days or more |
---|
2-Flute Ball End Type FX-MG-EBD
OSG
Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.
Days to Ship: | 8 Days or more |
---|
2-Flute Ball End Type GX-EBD-SF
OSG
Carbide mushroom type ball end mill developed for shrink fitting.
Days to Ship: | 8 Days or more |
---|
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
Days to Ship: | 8 Days or more |
---|
OSG
Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type (HSK-Compatible) CRN-HS-EBD
OSG
High-speed and high-precision machining has been achieved by fusion of shrink-fit and HSK
Days to Ship: | 8 Days or more |
---|
2-Flute Long Shank Ball End Type FX-LS-MG-EBD
OSG
The long shank allows machining in deep sections
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CRN-EBD
OSG
Ball end mill that enables dry cutting of copper and copper alloy thanks to the CrN coating and sharp blade shape.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type with Oil Holes FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type with Oil Holes (High Rigidity) FXS-HO-EBDS
OSG
Ball end mill for high-hardness steel with an oil hole that has achieved superb tool rigidity.
Days to Ship: | 8 Days or more |
---|
3-Flute, Ball End, High-Cutting, High-Feed Type PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Days to Ship: | 8 Days or more |
---|
Spherical Ball-End Type GX-EQD-SF
OSG
Ball end mill with spherical cutting edge developed for shrink fitting.
Days to Ship: | 8 Days or more |
---|
For Finishing, 2-Flute, Ball-End Type (HSK Compatible) FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
R Size(mm) |
Model |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Coating |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Link Diameter (d)(mm) |
R Precision(µm) |
Processing Applications |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | 2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CAP-EBD | 2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CRN-EBD | 2-Flute, Ball End Type with Oil Holes (High Rigidity) FXS-HO-EBDS | For Finishing, 2-Flute, Ball-End Type (HSK Compatible) FX-H-EBD | |||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
R Size(mm) | 0.5 ~ 10 | 2 ~ 6 | 3 ~ 6 | 0.1 ~ 1.5 | 0.2 ~ 1.5 | 3 ~ 6 | 0.5 ~ 10 | 0.5 ~ 15 | 5 ~ 10 | 0.6 | 8 | 0.5 ~ 6 | 0.5 ~ 15 | 0.1 ~ 6 | 3 ~ 10 | 3 ~ 10 | 0.5 ~ 10 | 8 ~ 10 | 0.5 ~ 6 |
Model | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Spherical Bore | Bore |
Work Material | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Cast Iron[○] | Aluminum[◎] / Copper[○] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
Flute Length (ℓ)(mm) | 2.5 ~ 38 | 8 ~ 60 | 12 ~ 22 | 0.4 ~ 8 | 0.8 ~ 8 | 4 ~ 7 | 2.5 ~ 38 | 2.5 ~ 55 | 10 ~ 20 | 3 | 24 | 1 ~ 12 | 2.5 ~ 55 | 0.4 ~ 22 | 12 ~ 38 | 6 ~ 20 | 1.5 ~ 30 | 12 ~ 15 | 1 ~ 12 |
Number of Flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 |
Coating | Non-Coated | DG | TiAlN | CrN | TiAlN | Non-Coated | DLC | TiAlN | For General Steel (AlCrN etc.) | TiAlN | For High Hardness (Silicone-Based) | CrN | TiAlN | CrN | TiAlN | TiAlN | TiAlN | For General Steel (AlCrN etc.) | TiAlN |
Overall Length (L)(mm) | 60 ~ 180 | 80 ~ 200 | 120 ~ 160 | 40 | 40 | 90 ~ 110 | 50 ~ 160 | 50 ~ 180 | 32 ~ 58 | 50 | 140 | 50 ~ 80 | 70 ~ 280 | 60 ~ 140 | 90 ~ 160 | 90 ~ 160 | 60 ~ 200 | 49 ~ 58 | 50 ~ 80 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | - | 20 | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ~ 30 |
Link Diameter (d)(mm) | 4 ~ 20 | 4 ~ 12 | 5 ~ 11 | 3 | 3 | 6 ~ 12 | 4 ~ 20 | 4 ~ 25 | 6 ~ 12 | 4 | 16 | 6 ~ 12 | 3 ~ 25 | 4 ~ 12 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 10 ~ 12 | 6 ~ 12 |
R Precision(µm) | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 |
Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy