(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CAP-EBD
OSG
Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.
Days to Ship: | 8 Days or more |
---|
2-Flute Ball End Type for Heavy Cutting (HSK-Compatible) FX-HS-EBDS
OSG
Ball end mill for heavy cutting that enables high speed and high efficiency (large cutting depth). Short overall length which fits shrink-fit and HSK types perfectly.
Days to Ship: | 8 Days or more |
---|
2-Flute Slim Shank Ball End Type FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End, Miniature Type CRN-EBD-3
OSG
A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End, Miniature Type FX-MG-EBD-3
OSG
FX coating and high-toughness ultra-hard material enable a wide range of machining
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End, Miniature Type MG-EBD-3
OSG
Uses high toughness carbide alloy with high transverse rupture strength
Days to Ship: | 8 Days or more |
---|
OSG
Allows both high-speed machining and dry cutting of aluminum. Also, great extension of tool life even in graphite processing has been achieved.
Days to Ship: | 8 Days or more |
---|
2-Flute Ball End Type DIA-EBD-SF
OSG
Excellent durability in graphite and aluminum machining
Days to Ship: | 8 Days or more |
---|
OSG
Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.
Days to Ship: | 8 Days or more |
---|
2-Flute Ball End Type FX-MG-EBD
OSG
Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.
Days to Ship: | 8 Days or more |
---|
2-Flute Ball End Type GX-EBD-SF
OSG
Carbide mushroom type ball end mill developed for shrink fitting.
Days to Ship: | 8 Days or more |
---|
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
Days to Ship: | 8 Days or more |
---|
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type (HSK-Compatible) CRN-HS-EBD
OSG
High-speed and high-precision machining has been achieved by fusion of shrink-fit and HSK
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type (Strong Type) WXL-HS-EBD
OSG
WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type (High-Precision Type) FX-EBD-6
OSG
High-precision ball end mill for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers. Super ultra-fine particle carbide base metal realizes long life for hardened steel high-speed machining.
Days to Ship: | 8 Days or more |
---|
2-Flute Long Shank Ball End Type FX-LS-MG-EBD
OSG
The long shank allows machining in deep sections
Days to Ship: | 8 Days or more |
---|
2-Flute, Ultra-High Precision Ball End Type (Strong Type) WXE-HS-EBD
OSG
Ultra-high grade accuracy and precision ball end mill series for better craftsmanship. Short length that perfectly fits the HSK shrink holder. The product accuracy warranty sheet is included for HP3 specification types.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CRN-EBD
OSG
Ball end mill that enables dry cutting of copper and copper alloy thanks to the CrN coating and sharp blade shape.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type with Oil Holes FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
Days to Ship: | 8 Days or more |
---|
2-Flute, Pencil-Neck, Ball End Type DIA-PC-EBD
OSG
Pencil neck ball supports ultra-deep milling of graphite electrodes. Ultra-microcrystalline diamond coating realizes dramatic extension of tool life.
Days to Ship: | 8 Days or more |
---|
2-Flute, Pencil-Neck, Ball End Type FX-PC-MG-EBD
OSG
Pencil neck with high rigidity provides excellent cutting even with large protrusion length.
Days to Ship: | 8 Days or more |
---|
WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Pencil-Neck, Ball End Type FX-PCL-EBD
OSG
Ball end mill for deep-engraving in places that cannot be reached with ordinary end mills.
Days to Ship: | 8 Days or more |
---|
Spherical Ball-End Type GX-EQD-SF
OSG
Ball end mill with spherical cutting edge developed for shrink fitting.
Days to Ship: | 8 Days or more |
---|
For Finishing, 2-Flute, Ball-End Type (HSK Compatible) FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
Days to Ship: | 8 Days or more |
---|
WXL-Coated 2-Flute Ball End Type WXL-EBD
OSG
[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
R Size(mm) |
Model |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Coating |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Link Diameter (d)(mm) |
R Precision(µm) |
Processing Applications |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | 2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CAP-EBD | 2-Flute Ball End Type for Heavy Cutting (HSK-Compatible) FX-HS-EBDS | 2-Flute, Ultra-High Precision Ball End Type (Strong Type) WXE-HS-EBD | 2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CRN-EBD | For Finishing, 2-Flute, Ball-End Type (HSK Compatible) FX-H-EBD | ||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
R Size(mm) | 0.5 ~ 10 | 0.5 ~ 6 | 3 ~ 6 | 0.1 ~ 1.5 | 0.2 ~ 1.5 | 0.05 ~ 1.5 | 0.5 ~ 6 | 5 ~ 6 | 0.5 ~ 10 | 0.5 ~ 15 | 5 ~ 10 | 0.5 ~ 12.5 | 0.6 | 0.5 ~ 6 | 0.1 ~ 6 | 0.1 ~ 3 | 0.5 ~ 15 | 4 | 0.1 ~ 6 | 3 ~ 10 | 0.5 ~ 3 | 0.3 ~ 6 | 0.1 ~ 3 | 2 ~ 6 | 8 ~ 10 | 0.5 ~ 6 | 0.05 ~ 10 |
Model | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Spherical Bore | Bore | Bore |
Work Material | Copper[◎] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] |
Flute Length (ℓ)(mm) | 2.5 ~ 38 | 1 ~ 12 | 12 ~ 22 | 0.4 ~ 8 | 0.8 ~ 8 | 0.2 ~ 8 | 2.5 ~ 22 | 10 ~ 12 | 2.5 ~ 38 | 2.5 ~ 55 | 10 ~ 20 | 2.5 ~ 50 | 3 | 1 ~ 12 | 0.4 ~ 18 | 0.2 ~ 6 | 2.5 ~ 55 | 8 | 0.4 ~ 22 | 12 ~ 38 | 2.5 ~ 12 | 0.6 ~ 22 | 0.16 ~ 6 | 8 ~ 22 | 12 ~ 15 | 1 ~ 12 | 0.2 ~ 38 |
Number of Flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 |
Coating | Non-Coated | TiAlN | TiAlN | CrN | TiAlN | Non-Coated | Diamond Coat | Diamond Coat | DLC | TiAlN | For General Steel (AlCrN etc.) | Non-Coated | TiAlN | CrN | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | CrN | TiAlN | Diamond Coat | TiAlN | For General Steel (AlCrN etc.) | TiAlN | For General Steel (AlCrN etc.) | TiAlN | For General Steel (AlCrN etc.) |
Overall Length (L)(mm) | 60 ~ 180 | 50 ~ 80 | 120 ~ 160 | 40 | 40 | 40 | 60 ~ 140 | 32 ~ 34 | 50 ~ 160 | 50 ~ 180 | 32 ~ 58 | 50 ~ 180 | 50 | 50 ~ 80 | 35 ~ 70 | 50 | 70 ~ 280 | 60 | 60 ~ 140 | 90 ~ 160 | 100 ~ 220 | 60 ~ 160 | 45 ~ 130 | 200 ~ 250 | 49 ~ 58 | 50 ~ 80 | 40 ~ 160 |
Length Under Neck (ℓ1)(mm) | - | 2.5 ~ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.1 ~ 9 | - | 16 | - | - | 30 ~ 150 | 10 ~ 80 | 1 ~ 80 | 100 ~ 140 | - | 2.5 ~ 30 | - |
Link Diameter (d)(mm) | 4 ~ 20 | 6 ~ 12 | 5 ~ 11 | 3 | 3 | 3 | 4 ~ 12 | 6 | 4 ~ 20 | 4 ~ 25 | 6 ~ 12 | 4 ~ 25 | 4 | 6 ~ 12 | 4 ~ 12 | 6 | 3 ~ 25 | 8 | 4 ~ 12 | 6 ~ 20 | 6 ~ 12 | 6 ~ 16 | 4 ~ 12 | 10 ~ 16 | 10 ~ 12 | 6 ~ 12 | 4 ~ 20 |
R Precision(µm) | -0.01~+0.01 | -0.015~+0.015 ~ -0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | - | - | - | -0.01~+0.01 | -0.01~+0.01 | -0.01~+0.01 | - | -0.01~+0.01 | -0.01~+0.01 | -0.007~+0.003 ~ -0.005~+0.005 | -0.005~+0.005 | -0.01~+0.01 | -0.003~+0.003 | -0.01~+0.01 | -0.01~+0.01 | - | -0.01~0.01 | -0.005~+0.005 | -0.01~0.01 | -0.01~+0.01 | -0.01~+0.01 | -0.007~0.003 ~ ±0.01 |
Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy