(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Forming Taps(Thread Types:Unified)

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
Days to Ship
  • All
  • Same day
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
  • 17 Days or Less
  1. 1
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Forming Taps - TiCN Coated, Grooveless, IT-NRT

      Forming Taps - TiN Coated, Grooveless, TIN-NRT

        Forming Taps - VP New Roll, Grooveless, VP-NRT

          Forming Taps - VP New Roll, Short Chamfer, VP-SC-NRT

            Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

              Forming Taps - High Speed Steel, TiCN Coated, OL+RZ/OL-RZ

                Forming Taps - High Performance, TiCN Coated, HP+ RZ/HP-RZ

                Brand

                OSG

                OSG

                OSG

                OSG

                OSG

                YAMAWA

                YAMAWA

                Product Series

                Forming Taps - TiCN Coated, Grooveless, IT-NRT

                Forming Taps - TiN Coated, Grooveless, TIN-NRT

                Forming Taps - VP New Roll, Grooveless, VP-NRT

                Forming Taps - VP New Roll, Short Chamfer, VP-SC-NRT

                Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

                Forming Taps - High Speed Steel, TiCN Coated, OL+RZ/OL-RZ

                Forming Taps - High Performance, TiCN Coated, HP+ RZ/HP-RZ

                Days to Ship 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 10 Days or more 8 Days or more
                Thread TypesUnifiedUnifiedUnifiedUnifiedUnifiedUnifiedUnified
                Thread Size (Nominal)No2UN ~ No4UNNo0UN ~ No12UNNo2UN ~ No6UNNo2UN ~ No6UNNo2UN ~ No6UNNo.10-32UNF ~ 1/4-20UNCNo.10-32UNF ~ M20
                Pitch (P), Thread Count(mm)40 ~ 5620 ~ 8032 ~ 5632 ~ 5632 ~ 56-0.25 ~ 1.75
                Number of Chamfered Threads (Lcf)2P2P ~ 4P2P ~ 4P1P2P ~ 4P4P2P ~ 4P
                Tool Material TypePowdered High-Speed SteelVanadium High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelPowdered High-Speed Steel
                Work MaterialLow-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]
                Tap ModelRolled TapRolled TapRolled TapRolled TapRolled TapRolled TapRolled Tap
                Bore ModelFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Through HolesFor Through Holes / For Blind Holes
                Coating PresenceIncludedIncludedIncludedIncludedIncludedIncludedIncluded
                Coating TypeTiCNTiNTiCNTiCNTiCNTiCNTiCN
                Overall Length (L)(mm)42 ~ 4436 ~ 6242 ~ 4842 ~ 488042 ~ 6236 ~ 105

                Loading...

                1. 1

                Related Categories to Forming Taps