(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Spiral Flute Taps（Work Material：High-Carbon Steel (C Content Exceeding 0.45%)）
| Days to Ship |
|
|---|
-
Spiral Flute Taps - Model A Series, V Coated, A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
- Volume Discount
Days to Ship: 8 Days or more -
G Spiral Tap for Deep Holes in Stainless Steel GSPS
Nachi-Fujikoshi
Coating tap suitable for stainless steel and places prone to chip clogging.
[Features]
· Adopts powdered high-speed steel with excellent wear resistance.
· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.
· A thick neck, which eliminates chipping and wrapping of chips, has been adopted.
[Applications]
· Coating tap suitable for stainless steel and places prone to chip clogging.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, V Coated, VP-SFT
OSG
Ideal for machining alloy steel and pre-hardened steel of 35 to 42 HRC
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, Low Spiral, LW-SFT
OSG
The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
- Volume Discount
Days to Ship: Same day Show Stock Products
-
Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】
MISUMI
Supports all work materials from standard steel to difficult-to-cut materials
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】
MISUMI
Also available: high-precision toothed 1.5P version for blind hole drilling, and a long shank version ideal for deep threading of workpieces(C-Value)
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - T Spiral Tap, High Speed Steel, TSP
Nachi-Fujikoshi
General-purpose tap used for threading blind holes.
[Features]
· The special groove shape excels in chip discharge properties, eliminating biting of chips and winding around taps.- Volume Discount
Days to Ship: 6 Days or more -
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
- Volume Discount
Days to Ship: Same day Show Stock Products
-
Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT
OSG
Suitable for blind hole machining in high carbon materials such as medium carbon steel and higher, die steel, alloy steel, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Spiral Flute Taps - High Speed Steel, SU Type
SKC
•Thread Types : Meter
•Thread Size (Nominal) : M10, M12, M14, M16, M18, M20, M22, M24, M27, M3, M30, M33, M36, M4, M5, M6, M8
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), Heat-Treated Steel (25 - 35 HRC), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Stainless Steel (SUS), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Spiral Tap
For complete product overview and details on Stainless Steel-Use SU Spiral-Type, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
Spiral Flute Taps - High Speed Steel, SX Type
SKC
•Tap Model: Spiral Tap
•Material: SKH- Volume Discount
Days to Ship: 9 Days or more -
Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series
YAMAWA
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.
- Volume Discount
Days to Ship: 9 Days or more -
Spiral Flute Taps - Dry Tapping, Through Hole Use, HDISL Series
YAMAWA
[Features]
· Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.
· Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.- Volume Discount
Days to Ship: 9 Days or more -
Spiral Flute Taps - Ultra Fast Tapping, Vertical Use, HFIHS Series
YAMAWA
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.
- Volume Discount
Days to Ship: 9 Days or more -
Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series
YAMAWA
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Deep Hole Machining, SU-S-SP
YAMAWA
[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, SU+SP/SU-SP
YAMAWA
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Through Hole Use, SU+SL
YAMAWA
A tap suitable for machining through holes, including viscous materials that have a high machining hardness such as stainless steel, chrome steel, and molybdenum steel.
[Features]
· Achieves a tool life triple or more that of SU-PO for SUS304.
· Provides excellent finish and thread shape to female thread flanks even after 2,000 drilling.
· By adopting inverse twisted spiral groove, the discharge of chips is improved and tool life is improved compared to SU-PO.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 5 to 15 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - TiN Coated, Through Hole Use, AU+SL
YAMAWA
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - For Titanium Alloys, ZET-B
YAMAWA
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - For Nickel Base Alloys, ZEN-B
YAMAWA
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)
YAMAWA
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Plus Series, TiN Coated, AU+ SP
YAMAWA
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
[Features]
· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
· Completely threaded to prevent the blade from chipping.
· Reduction of friction resistance and tapping torque.
· Maintains screw guidance (stable machining).
· Maintains excellent chip discharge performance (smooth discharge).
[Applications]
· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
· Ideal for water soluble cutting fluids.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, Long Shank, LS-SP (LS-N-SP)
YAMAWA
N-SP(LH) is available as long as it lasts. SP(LH) takes the place of N-SP(LH).
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - TiN Coated, Long Shank, LS-SP-V (LS-N-SP-V)
YAMAWA
LS-N-SP-V is available as long as it lasts. LS-SP-V takes the place of LS-N-SP-V.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Fast Tapping, Through Hole Use, F-SL
YAMAWA
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Fast Tapping, TiN Coated, F-SP
YAMAWA
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
- Volume Discount
Days to Ship: 9 Days or more -
Spiral Flute Taps - for High Carbon Steels, HC+SP/HC-SP
YAMAWA
It is suitable for tapping high carbon steel such as S55C.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - for High Carbon Steels, Oxidized, HC+SP-OX/HC-SP-OX
YAMAWA
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
- Volume Discount
Days to Ship: 9 Days or more -
Spiral Flute Taps - Deep Hole Machining, Oxidized, S-SP
YAMAWA
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - for Tough Stainless Steels, Oxidized, SU2-SP
YAMAWA
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - SG Spiral Tap, High Speed Steel, SGSP
Nachi-Fujikoshi
[Features]
・ Exhibits excellent performance across a wide range of cutting conditions, machinery, and work materials.- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Thread Size (Nominal) |
| Pitch (P), Thread Count(mm) |
| Number of Chamfered Threads (Lcf) |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating Presence |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | Nachi-Fujikoshi | OSG | OSG | OSG | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SKC | SKC | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | OSG | Nachi-Fujikoshi |
| Product Series | Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT | Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】 | Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】 | Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】 | Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT | Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT | Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT | Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT | Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series | Spiral Flute Taps - Dry Tapping, Through Hole Use, HDISL Series | Spiral Flute Taps - Ultra Fast Tapping, Vertical Use, HFIHS Series | Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series | Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP) | Spiral Flute Taps - High Speed Steel, Long Shank, LS-SP (LS-N-SP) | Spiral Flute Taps - TiN Coated, Long Shank, LS-SP-V (LS-N-SP-V) | Spiral Flute Taps - for High Carbon Steels, Oxidized, HC+SP-OX/HC-SP-OX | Spiral Flute Taps - for Tough Stainless Steels, Oxidized, SU2-SP | Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT | |||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 6 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Thread Types | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Wit | Meter | Meter | Meter | Meter | Meter | Meter / Unified / Wit | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Wit | Meter | Meter | Meter | Meter | Meter |
| Thread Size (Nominal) | 1-8UNC ～ M56 | M8 ～ M16 | M3 ～ M12 | M6 | M1.6 ～ M20 | M2 ～ M12 | M3 ～ M10 | M2 ～ M12 | M4 | M1.4 ～ M16 | M3 ～ M16 | M3 ～ M16 | M5 ～ M10 | M3 ～ M10 | M10 ～ M12 | M6 ～ M16 | M10 ～ M14 | W1 ～ M48 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M3 ～ M20 | No.10-32UNF ～ M30 | M3 ～ M6 | M3 ～ M6 | M3 ～ M20 | M3 ～ M20 | M2 ～ M6 | M2 ～ M12 | M16 | M3 ～ M12 | M3 ～ M12 | M3 ～ M12 | 1/2W12 ～ M30 | M3 ～ M16 | M2 ～ M30 | M3 ～ M24 | M2 ～ M24 | M3 ～ M24 |
| Pitch (P), Thread Count(mm) | 0.25 ～ 5.5 | 1.25 ～ 2 | 0.5 ～ 1.75 | 1 | 0.35 ～ 2.5 | 0.4 ～ 1.75 | 0.5 ～ 1.5 | 0.4 ～ 1.75 | 0.7 | 0.3 ～ 2 | 0.5 ～ 2 | 0.5 ～ 2 | 0.8 ～ 1.5 | 0.5 ～ 1.5 | 1.25 ～ 1.5 | 1 ～ 2 | 1.5 ～ 2 | 0.5 ～ 20 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 2.5 | 0.3 ～ 3.5 | 0.5 ～ 1 | 0.5 ～ 1 | 0.5 ～ 2.5 | 0.5 ～ 2.5 | 0.4 ～ 1 | 0.4 ～ 1.75 | 2 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 3 | 0.5 ～ 2 | 0.4 ～ 3.5 | 0.5 ～ 3 | 0.25 ～ 3 | 0.5 ～ 3 |
| Number of Chamfered Threads (Lcf) | 1.5P ～ 2.5P | 2.5P | 2.5P | 2.5P | 3P | 2.5 P | 1.5 P ～ 2.5 P | 2.5 P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 3P | 3P | 3P | - | - | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 5P | 5P | 3P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 2.5P | 2.5 |
| Tool Material Type | Powdered High-Speed Steel / Vanadium High-Speed Steel | Alloy High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | - | - | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Alloy High-Speed Steel |
| Work Material | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[○] |
| Tap Model | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
| Bore Model | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | - | - | For Through Holes / For Blind Holes | For Through Holes | For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Through Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes |
| Coating Presence | Included | Included | Included | None | None | None | Included | None | Included | Included | Included | Included | Included | Included | None | None | - | - | Included | Included | Included | Included | None | None | None | Included | None | None | None | Included | None | None | Included | Included | None | None | None | None | Included | Included |
| Coating Type | Others | TiN | TiCN | Non-Coated | Non-Coated | - | TiN | - | - | TiN | TiN | Others | TiN | TiN | Non-Coated | Non-Coated | - | - | TiCN | TiCN | TiCN | TiCN | - | - | - | TiN | - | - | - | TiN | - | - | TiN | TiN | - | - | - | - | Others | TiCN |
| Overall Length (L)(mm) | 34 ～ 250 | 70 ～ 95 | 46 ～ 82 | 62 | 36 ～ 105 | 40 ～ 82 | 46 ～ 150 | 40 ～ 82 | 52 | 34 ～ 95 | 100 ～ 150 | 46 ～ 95 | 60 ～ 75 | 100 ～ 150 | 75 ～ 82 | 100 ～ 150 | - | - | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 46 ～ 105 | 36 ～ 135 | 46 ～ 62 | 46 ～ 62 | 46 ～ 105 | 46 ～ 105 | 42 ～ 62 | 42 ～ 82 | 150 | 100 ～ 150 | 46 ～ 82 | 46 ～ 82 | 46 ～ 135 | 46 ～ 95 | 42 ～ 135 | 46 ～ 120 | 80 ～ 200 | 46 ～ 120 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Thread Types
- Meter
- Unified
- Wit
- Perforation
-
Metric / Inch
- metric
-
Thread Size (Nominal)
- No.10-32UNF
- No.10-24UNC
- No.2-56UNC
- No.3-48UNC
- No.4-48UNF
- No.4-40UNC
- No.5-44UNF
- No.5-40UNC
- No.6-40UNF
- No.6-32UNC
- No.8-36UNF
- No.8-32UNC
- W1
- 1'-12UNF
- 1-8UNC
- 1'-8UNC
- W1"1/2
- 1 1/2-8UN
- W1"1/4
- 1 1/4-8UN
- W1"1/8
- 1 1/8-8UN
- 1/2UN
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- 1/2W12
- 1 3/4-8UN
- W1"3/8
- 1 3/8-8UN
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4W20
- 1 5/8-8UN
- 1 7/8-8UN
- 1'W8
- SM1/8
- W1/8
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- 2-8UN
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- 3/4UN
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/4W10
- 3/8UN
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/8W16
- SM3/16
- 3/16W24
- SM3/32
- M3.5
- M4
- No4UN
- №4-40UNC
- M4.5
- M5
- No5UN
- №5-40UNC
- 5/8UN
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16UN
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- M5.5
- M6
- No6UN
- №6-32UNC
- M7
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- M8
- No8UN
- №8-32UNC
- M9
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- M10
- №10-32UNF
- №10-24UNC
- M11
- SM11/64
- M12
- M14
- M15
- SM15/64
- M16
- M17
- M18
- M20
- M22
- M24
- M25
- M26
- M27
- M28
- M30
- M33
- M36
- M39
- M42
- M45
- M48
- M56
-
Pitch (P), Thread Count(mm)
-
Number of Chamfered Threads (Lcf)
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Tool Steel (Before SKD Quenching)
- Cast Steel (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Cast Magnesium Alloy (MC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
- Nickel-Based Alloy (Inconel Equivalent)
- Thermosetting Plastic (Bakelite, Phenol etc.)
- Thermoplastic (PVC, Nylon etc.)
-
Tap Model
-
Bore Model
-
Coating Presence
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- YAMAWA (20)
- OSG (12)
- Nachi-Fujikoshi (3)
- SKC (2)
- Trusco Nakayama (0)
- ESCO (0)
- GUHRING (0)
- SANDVIK (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy