(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machinin ...Readmore
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap. ▲ Close
Days to Ship |
|
---|
Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT
OSG
Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, for Die Castings, OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L
OSG
[Specifications]· Shape: Spiral Tap· Screw type: metric· Chamfer threads: 2.5 P· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vin...Readmore
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Deep Hole Machining, High Speed Steel, SUS-DH-SFT
OSG
Ideal for deep-hole processing of stainless steel over 2D
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, Long Shank, EX-LT-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, Low Spiral, LW-SFT
OSG
The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose, Long Shank, EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
Special Price | |
Days to Ship: | Same day |
Show Stock Products
Spiral Flute Taps - For Copper, CrN Coated, CU-SFT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT
OSG
Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - For Non-Ferrous Metals, Deep Hole Machining, EX-B-DH-SFT
OSG
Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.
Days to Ship: | 8 Days or more |
---|
Hand Taps - for Stainless Steels, Oxidized, EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
Days to Ship: | Same day |
---|
Show Stock Products
Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - V Coated, Long Shank, V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Stainless Steels, Oxidized, EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Stainless Steel, Long Shank, EX-LT-SUS-POT
OSG
With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Deep Hole Machining, EX-DH-POT
OSG
Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, LT-SUS-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, for Stainless Steels, Short Screw, EX-SUS-S-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - for Stainless Steels, Long Shank, Short Screw, LT-SUS-S-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, Micro Tool, MMTS
NS TOOL
•Thread Types : Others•Thread Size (Nominal) : S0.1, S0.2, S0.3, S0.4, S0.5, S0.6, S0.8, S1, S1.2, S1.4•Tool Material Type : Carbide•Work Material : Alloy Steel (SCM), Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Heat-Treated Steel (25 - 35 HRC), Heat-Treated Steel (35 - 45 HRC), Heat-Treated Steel (45 - 55 HRC), High-Carbon Steel (C Content Exceeding 0.45%), High-Hardness Steel (50 - 60 HRC), Lo...Readmore
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM
OSG
[Specifications]· Shape: Spiral Tap· Screw type: machine· Chamfer threads: 2.5 P· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vin...Readmore
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose Whitworth Screw, EX-SFT-W
OSG
[Specifications]· Shape: Spiral Tap· Screw type: Whitworth· Chamfer threads: 2.5 P· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vin...Readmore
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Oxidized, Long Shank, EX-LT-H-POT
OSG
[Specifications]· Shape: Point tap· Screw type: metric· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]
Days to Ship: | 8 Days or more |
---|
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy