(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machinin ...Readmore
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap. ▲ Close
Days to Ship |
|
---|
Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT
OSG
Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, for Die Castings, OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - Carbide, Long Shank, OT-LT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, Through Hole/Blind Hole Use, OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, Long Shank, LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Long Shank, OT-LT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Short Screw, OT-S-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, Micro Tool, MMTS
NS TOOL
•Thread Types : Others
•Thread Size (Nominal) : S0.1, S0.2, S0.3, S0.4, S0.5, S0.6, S0.8, S1, S1.2, S1.4
•Tool Material Type : Carbide
•Work Material : Alloy Steel (SCM), Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Heat-Treated Steel (25 - 35 HRC), Heat-Treated Steel (35 - 45 HRC), Heat-Treated Steel (45 - 55 HRC), High-Carbon Steel (C Content Exceeding 0.45%), High-Hardness Steel (50 - 60 HRC), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Stainless Steel (SUS), Thermoplastic (PVC, Nylon etc.), Thermosetting Plastic (Bakelite, Phenol etc.), Titanium Alloy (Ti-6Al-4V Equivalent), Tool Steel (Before SKD Quenching)
•Tap Model : Tapping Cutter
For complete product overview and details on MMTS Micro Threading Tool, see the sections below:
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series | Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC | Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-TPT | Parallel Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-SPT | ||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter / Unified | Meter | Meter | Pipe Parallel | Meter | Meter | Meter / Pipe Taper / Pipe Parallel | Meter / Unified / Pipe Taper | Meter | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Parallel | Others |
Thread Size (Nominal) | - | M3 ~ M12 | M3 ~ M12 | G1/2 ~ G3/8 | M1.4 ~ M20 | M3 ~ M20 | - | - | - | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | G1/2 ~ G3/8 | S0.1 ~ S1.4 |
Pitch (P), Thread Count(mm) | 0.25 ~ 32 | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 14 ~ 28 | 0.3 ~ 2.5 | 0.5 ~ 2.5 | 1 ~ 19 | 1 ~ 28 | 0.5 ~ 3 | 14 ~ 28 | 14 ~ 28 | 14 ~ 28 | 14 ~ 28 | 0.025 ~ 0.3 |
Number of Chamfered Threads (Lcf) | - | 1.5P ~ 2.5P | 1.5P | 3P | 1.5P ~ 3P | 1.5P ~ 3P | - | - | - | 2.5P | 2.5P | 2.5P | 3P | - |
Tool Material Type | Carbide | Carbide | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
Work Material | Thermosetting Plastic (Bakelite, Phenol etc.)[○] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[○] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[○] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[○] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] |
Tap Model | Tapping Cutter | Spiral Tap | Hand Tap | Pipe Tap | Hand Tap | Hand Tap | Tapping Cutter | Tapping Cutter | Tapping Cutter | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Tapping Cutter |
Bore Model | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - |
Coating Presence | Included | None | None | None | None | None | Included | Included | Included | None | None | None | None | Included |
Coating Type | For High Hardness (Silicone-Based) / Others | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN |
Overall Length (L)(mm) | 40 | 46 ~ 82 | 46 ~ 82 | 100 ~ 150 | 34 ~ 105 | 100 ~ 150 | 80 ~ 210 | 60 ~ 120 | 60 ~ 120 | 55 ~ 80 | 100 ~ 150 | 55 ~ 80 | 55 ~ 80 | 45 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy