(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDASP Series
YAMAWA
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.
Days to Ship: | 9 Days or more |
---|
Thread Mills - Cobalt High Speed Steel, Helical Thread, MC-HLC
YAMAWA
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.
Days to Ship: | 9 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, PO-V(N-PO-V)
YAMAWA
Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - TiN Coated, Through Hole Use, AU+SL
YAMAWA
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P
YAMAWA
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
Days to Ship: | 8 Days or more |
---|
Hand Taps - for Left Hand Threads, HT(LH)
YAMAWA
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Plus Series, TiN Coated, AU+ SP
YAMAWA
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
[Features]
· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
· Completely threaded to prevent the blade from chipping.
· Reduction of friction resistance and tapping torque.
· Maintains screw guidance (stable machining).
· Maintains excellent chip discharge performance (smooth discharge).
[Applications]
· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
· Ideal for water soluble cutting fluids.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Through Hole Use, +PO(N+PO)
YAMAWA
A point tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, Long Shank, LS-SP (LS-N-SP)
YAMAWA
N-SP(LH) is available as long as it lasts. SP(LH) takes the place of N-SP(LH).
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - TiN Coated, Long Shank, LS-SP-V (LS-N-SP-V)
YAMAWA
LS-N-SP-V is available as long as it lasts. LS-SP-V takes the place of LS-N-SP-V.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - TiN Coated, Long Shank, LS-PO-V(LS-N-PO-V)
YAMAWA
LS-N-PO-V is available as long as it lasts. LS-PO-V takes the place of LS-N-PO-V.
Days to Ship: | 9 Days or more |
---|
Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, Short Screw, CT-S-PT
YAMAWA
•Tap Model: Pipe Tap
•Thread Type: Pipe Taper
•Number Of Chamfered Threads Lcf: 2.5P
•Tool Material Type: Carbide
•Class: Ⅱ
Days to Ship: | 9 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT
YAMAWA
For standard pipe taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Long Screw, CT-PT
YAMAWA
•Thread Types : Pipe Taper
•Thread Size (Nominal) : 1-¦-11, 1/2-14, 1/4-19, 1/8-28, 3/4-14, 3/8-19
•Number of Chamfered Threads (Lcf) : 2.5P
•Tool Material Type : Carbide
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Ductile Cast Iron (FCD), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
•Bore Model : For Blind Holes, For thru Holes
For complete product overview and details on For Tapered Screw for Pipe (Long Screw Type for Use with Cast Iron Hard) CT-PT, see the sections below:
Days to Ship: | 9 Days or more |
---|
Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PF
YAMAWA
A tap suitable for thread machining of hard and brittle material such as cast iron.
Days to Ship: | 9 Days or more |
---|
Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PS
YAMAWA
•Thread Types : Pipe Parallel
•Thread Size (Nominal) : 1-¦-11, 1/2-14, 1/4-19, 1/8-28, 3/4-14, 3/8-19
•Number of Chamfered Threads (Lcf) : 3.5P
•Tool Material Type : Carbide
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Ductile Cast Iron (FCD), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
•Bore Model : For Blind Holes, For thru Holes
For complete product overview and details on For Parallel Screw for Pipe (Hard) CT-PS, see the sections below:
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - Fast Tapping, Through Hole Use, F-SL
YAMAWA
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Fast Tapping, TiN Coated, F-SP
YAMAWA
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - for High Carbon Steels, HC+SP/HC-SP
YAMAWA
It is suitable for tapping high carbon steel such as S55C.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - for High Carbon Steels, Oxidized, HC+SP-OX/HC-SP-OX
YAMAWA
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
Days to Ship: | 9 Days or more |
---|
Thread Mills - Carbide, Helical Thread, MC-CSLC
YAMAWA
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.
Days to Ship: | 9 Days or more |
---|
Spiral Point Taps - Carbide, Through Hole Use, N-CT-PO
YAMAWA
•Tap Model: Point Tap
•Bore Model: For Through Holes
•Thread Type: Meter
•Number Of Chamfered Threads Lcf: 5P
•Tool Material Type: Carbide
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM
OSG
[Specifications]
· Shape: Spiral Tap
· Screw type: machine
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose Whitworth Screw, EX-SFT-W
OSG
[Specifications]
· Shape: Spiral Tap
· Screw type: Whitworth
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - TiN Coated, Long Shank, Short Screw, TIN-LT-S-TPT
OSG
[Specifications]
· Shape: Pipe tap
· Screw type: pipe taper
· Coating: TiN
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [○] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Tempered Steel (25 to 35HRC) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○]
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - TiN Coated, Long Shank, TIN-LT-TPT
OSG
[Specifications]
· Shape: Pipe tap
· Screw type: pipe taper
· Coating: TiN
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [○] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Tempered Steel (25 to 35HRC) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○]
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
Brand | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | OSG | OSG | OSG | OSG | OSG | OSG | RUKO |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDASP Series | Thread Mills - Cobalt High Speed Steel, Helical Thread, MC-HLC | Spiral Point Taps - High Speed Steel, TiN Coated, PO-V(N-PO-V) | Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P | Spiral Point Taps - High Speed Steel, Through Hole Use, +PO(N+PO) | Spiral Flute Taps - High Speed Steel, Long Shank, LS-SP (LS-N-SP) | Spiral Flute Taps - TiN Coated, Long Shank, LS-SP-V (LS-N-SP-V) | Spiral Point Taps - TiN Coated, Long Shank, LS-PO-V(LS-N-PO-V) | Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, Short Screw, CT-S-PT | Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT | Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PF | Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PS | Spiral Flute Taps - for High Carbon Steels, Oxidized, HC+SP-OX/HC-SP-OX | Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM | Spiral Flute Taps - General Purpose Whitworth Screw, EX-SFT-W | Taper Pipe Taps - TiN Coated, Long Shank, Short Screw, TIN-LT-S-TPT | Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT | Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series | |||||||||||
Days to Ship | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter | Meter / Pipe Taper / Pipe Parallel | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Parallel | Pipe Parallel | Meter | Meter | Meter / Wit | Meter | Meter / Pipe Taper / Pipe Parallel | Meter | Perforation | Wit | Pipe Taper | Pipe Taper | Meter | Meter | Meter |
Thread Size (Nominal) | M6 ~ M20 | 1015 ~ 32506N300M | M3 ~ M12 | M3 ~ M6 | M3 ~ M20 | M2.5 ~ M8 | M2 ~ M12 | M3 ~ M6 | M16 | M3 ~ M12 | M3 ~ M12 | 1/2-14 ~ 3/8-19 | 1/4-19 | 1´-11 ~ 3/8-19 | 1´-11 ~ 3/8-19 | 1´-11 ~ 3/8-19 | M3 ~ M12 | M3 ~ M12 | 1/2W12 ~ M30 | M3 ~ M16 | 06510X28R ~ 200505N300M | M3 ~ M12 | SM1/4 ~ SM15/64 | W1/8 | Rc1/2 ~ Rc3/8 | Rc1/2 ~ Rc3/8 | M2 ~ M24 | M2 ~ M24 | M6 |
Pitch (P), Thread Count(mm) | 1 ~ 1.75 | - | 0.5 ~ 1.75 | 0.5 ~ 1 | 0.5 ~ 2.5 | 0.45 ~ 0.75 | 0.4 ~ 1.75 | 0.5 ~ 1 | 2 | 0.5 ~ 1.75 | 0.5 ~ 1.75 | - | - | - | - | - | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 0.5 ~ 3 | 0.5 ~ 2 | 0.5 ~ 3 | 0.5 ~ 1.75 | 20 ~ 56 | 40 | 14 ~ 28 | 14 ~ 28 | 0.25 ~ 3 | 0.25 ~ 3 | 1 |
Number of Chamfered Threads (Lcf) | 2.5P | - | 5P | 5P | 5P | 5P | 2.5P | 5P | 2.5P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 3.5P | 3.5P | 5P | 2.5P | 2.5P | 2.5P | - | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 5P | - |
Tool Material Type | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel |
Work Material | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] |
Tap Model | Spiral Tap | Tapping Cutter | Point Tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Point Tap | Spiral Tap | Spiral Tap | Point Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Tapping Cutter | Point Tap | Spiral Tap | Spiral Tap | Pipe Tap | Pipe Tap | Spiral Tap | Point Tap | Hand Tap |
Bore Model | For Through Holes / For Blind Holes | - | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes |
Coating Presence | Included | Included | Included | Included | None | None | Included | None | None | None | Included | None | None | None | None | None | Included | Included | None | None | Included | None | None | None | Included | Included | Included | Included | None |
Coating Type | TiCN | TiN | TiN | TiN | - | - | TiN | - | - | - | TiN | - | - | - | - | - | TiN | TiN | - | - | TiAlN | - | Non-Coated | Non-Coated | TiN | TiN | Others | Others | Non-Coated |
Overall Length (L)(mm) | 62 ~ 105 | 70 ~ 200 | 46 ~ 82 | 46 ~ 62 | 46 ~ 105 | 46 ~ 70 | 42 ~ 82 | 46 ~ 62 | 150 | 100 ~ 150 | 100 ~ 150 | 55 ~ 80 | 150 | 55 ~ 95 | 55 ~ 95 | 55 ~ 95 | 46 ~ 82 | 46 ~ 82 | 46 ~ 135 | 46 ~ 95 | 50 ~ 140 | 46 ~ 82 | 42 ~ 65 | 46 | 100 ~ 150 | 100 ~ 150 | 80 ~ 200 | 80 ~ 200 | 60 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy