(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machinin ...Readmore
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap. ▲ Close
Days to Ship |
|
---|
Hand Taps - Through Hole/Blind Hole Use, HT
OSG
An HSS hand tap.
For complete product overview and details on Hand Taps - Through Hole/Blind Hole Use, HT see the sections below:
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Forming Taps - VP New Roll, Grooveless, VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: | 8 Days or more |
---|
Forming Taps - TiN Coated, Grooveless, TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Model A Series, V Coated, A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT
MISUMI
Now offering a special price on threading cutters for stable, high-speed machining
Days to Ship: | 10 Days or more |
---|
Forming Taps - X Performer, Grooveless, S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, HT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML
MISUMI
TS-coated version of the popular threading cutter
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】
MISUMI
Also available: high-precision toothed 1.5P version for blind hole drilling, and a long shank version ideal for deep threading of workpieces(C-Value)
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Forming Taps - TiCN Coated, Grooveless, IT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: | 8 Days or more |
---|
Forming Taps - Carbide, New Roll Tap, Long Shank, OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, Through Hole/Blind Hole Use
YAMAWA
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)
YAMAWA
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, for Cast Iron, N-CT FC
YAMAWA
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT
MISUMI
Proprietary coating and geometry for left-flute left-rotary cutting enables milling threading of hard steel up to HRC62.
Days to Ship: | 10 Days or more |
---|
Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, MT-SPFT
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT
OSG
Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, for Die Castings, OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide with Oil Hole, TiAlN Coated, DR-PNAC, Planet Cutter Series
OSG
A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, TiN Coated, TIN-TPT
OSG
TiN coating excellent in welding resistance and abrasion resistance is applied
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Parallel Pipe Taps - Carbide, Long Shank, OT-LT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, IT-TF-T
TANOI
•Tap Model: Rolled Tap
•Coating Type: TiCN
•Thread Type: Meter
•Tool Material Type: High-Speed Steel
•Coating Presence: Included
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, Long Shank, LS-SL-TF
TANOI
•Thread Types : Meter
•Thread Size (Nominal) : M11, M12, M14, M16, M18, M20, M3, M3.5, M4, M5, M6, M7, M8, M9
•Number of Chamfered Threads (Lcf) : 1P, 2P
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)
•Tap Model : Rolled Tap
For complete product overview and details on Long Seamless TAFLET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Hand Taps - for Left Hand Threads, HT(LH)
YAMAWA
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L
OSG
[Specifications]
· Shape: Spiral Tap
· Screw type: metric
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML
MISUMI
Threading cutters for stable high-speed processing are available at a special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, DLC Coated, DLC-ALCTM
MISUMI
For aluminum processing (C-Value)
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
Spiral Flute Taps - Carbide, SEC-SPFT
MISUMI
Ideal for high-volume, high-speed machining of non-ferrous metals (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】
MISUMI
Supports all work materials from standard steel to difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, Low Spiral, LW-SFT
OSG
The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose, Long Shank, EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
Brand | OSG | OSG | OSG | OSG | MISUMI | OSG | MISUMI | OSG | MISUMI | MISUMI | OSG | OSG | YAMAWA | YAMAWA | YAMAWA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | TANOI | TANOI | OSG | YAMAWA | OSG | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG |
Product Series | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT | Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】 | Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP) | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT | Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】 | Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】 | Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT | Thread Mills - Carbide with Oil Hole, TiAlN Coated, DR-PNAC, Planet Cutter Series | Forming Taps - High Speed Steel, TiCN Coated, Long Shank, LS-SL-TF | Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series | Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L | Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series | Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】 | Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】 | Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】 | Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT | ||||||||||||||||||||||||||||
Days to Ship |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter / Unified | Meter / Unified | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Pipe Taper | Meter | Meter | Meter / Unified | Meter | Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Pipe Taper | Pipe Parallel | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
Thread Size (Nominal) | M1 ~ M35 | M1 ~ M12 | No0UN ~ M20 | 1-8UNC ~ M56 | M1.4 ~ M20 | M1 ~ M45 | M3 ~ M10 | R1"1/4 ~ R5/8 | M3 ~ M12 | M3 ~ M10 | M1 ~ No4UN | M3 ~ M12 | No.10-24UNC | M2 ~ M6 | M3 ~ M5 | M2 ~ M12 | M2 ~ M12 | M2 ~ M12 | M2 ~ M24 | M2 ~ M24 | 1/2UN ~ M36 | M3 ~ M12 | M3 ~ M12 | M6 ~ M12 | M1.4 ~ M42 | M3 ~ M30 | R1 ~ R3/8 | G1/2 ~ G3/8 | M1 ~ M10 | M4 ~ M6 | 1/2-20UNF ~ M24 | M2.5 ~ M8 | M24 ~ M30 | M2 ~ M24 | M3 ~ M20 | M3 ~ M16 | M3 ~ M10 | M3 ~ M10 | M2 ~ M12 | M3 ~ M10 | M1.4 ~ M16 | M3 ~ M16 | M3 ~ M16 | M6 | M2.5 ~ M20 |
Pitch (P), Thread Count(mm) | 0.25 ~ 40 | 0.25 ~ 56 | 0.25 ~ 80 | 0.25 ~ 5.5 | 0.3 ~ 2.5 | 0.2 ~ 4.5 | 0.5 ~ 1.5 | 11 ~ 14 | 0.5 ~ 1.75 | 0.5 ~ 1.5 | 0.25 ~ 56 | 0.5 ~ 1.75 | - | 0.4 ~ 1 | 0.5 ~ 0.8 | 0.4 ~ 1.75 | 0.4 ~ 1.75 | 0.4 ~ 1.75 | 0.4 ~ 3 | 0.4 ~ 3 | 0.35 ~ 40 | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 1 ~ 1.75 | 0.3 ~ 4.5 | 0.5 ~ 3.5 | 11 ~ 28 | 14 ~ 28 | 0.2 ~ 1.5 | 0.7 ~ 1 | 0.25 ~ 3 | 0.45 ~ 0.75 | 3 ~ 3.5 | 0.25 ~ 3 | 0.5 ~ 2.5 | 0.5 ~ 2 | 0.5 ~ 1.5 | 0.5 ~ 1.5 | 0.4 ~ 1.75 | 0.5 ~ 1.5 | 0.3 ~ 2 | 0.5 ~ 2 | 0.5 ~ 2 | 1 | 0.45 ~ 2 |
Number of Chamfered Threads (Lcf) | 1.5P ~ 9P | 2P ~ 4P | 2P ~ 4P | 1.5P ~ 2.5P | - | 2P ~ 4P | 1.5 P ~ 9 P | 2.5P | - | 1.5 P ~ 2.5 P | 2P | 2P | 5P | 2.5P | 1.5P | - | 2.5 P | 5 P | 2.5 P | 5 P | 2.5P ~ 3P | 1.5P ~ 2.5P | 1.5P | - | 5P | 6P | 2.5P | 3P | 1P ~ 4P | 1P ~ 2P | 5P | 5P | 2.5P | 5P | - | - | 2 P ~ 4 P | 1.5 P ~ 2.5 P | 2.5 P | 5 P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P |
Tool Material Type | High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel / Vanadium High-Speed Steel | Carbide | Powdered High-Speed Steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-Speed Steel | Carbide | Vanadium High-Speed Steel | Powdered High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Carbide | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
Work Material | Brass (Bs)[○] | Brass (Bs)[◎] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[◎] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[◎] | Brass (Bs)[◎] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[◎] | Brass (Bs)[◎] | Brass (Bs)[○] | Brass (Bs)[◎] | Brass (Bs)[◎] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[◎] | Brass (Bs)[◎] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] | Brass (Bs)[○] |
Tap Model | Hand Tap | Rolled Tap | Rolled Tap | Spiral Tap | Tapping Cutter | Rolled Tap | Hand Tap | Pipe Tap | Tapping Cutter | Spiral Tap | Rolled Tap | Rolled Tap | Hand Tap | Spiral Tap | Hand Tap | Tapping Cutter | Spiral Tap | Point Tap | Spiral Tap | Point Tap | Spiral Tap | Spiral Tap | Hand Tap | Tapping Cutter | Point Tap | Point Tap | Pipe Tap | Pipe Tap | Rolled Tap | Rolled Tap | Point Tap | Hand Tap | Spiral Tap | Point Tap | Tapping Cutter | Tapping Cutter | Rolled Tap | Spiral Tap | Spiral Tap | Point Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
Bore Model | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | - | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes |
Coating Presence | None | Included | Included | Included | Included | Included | None | None | Included | Included | Included | None | None | None | None | Included | None | None | None | None | None | None | None | Included | Included | Included | Included | None | Included | Included | Included | None | None | Included | Included | Included | Included | None | None | Included | Included | Included | Included | None | None |
Coating Type | Non-Coated | TiCN | TiN | Others | TiAlN | TiCN | - | Non-Coated | For High Hardness (Silicone-Based) | TiN | TiCN | Non-Coated | - | - | - | TiAlN | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | TiN | TiN | TiN | Non-Coated | TiCN | TiCN | Others | - | Non-Coated | Others | TiAlN | DLC | TiN | - | - | TiN | TiN | TiN | Others | Non-Coated | Non-Coated |
Overall Length (L)(mm) | 30 ~ 135 | 30 ~ 82 | 30 ~ 105 | 34 ~ 250 | 39 ~ 105 | 30 ~ 220 | 46 ~ 75 | 82 ~ 105 | 48 ~ 74 | 46 ~ 150 | 30 ~ 46 | 100 ~ 150 | 60 | 42 ~ 62 | 46 ~ 60 | 58 ~ 73 | 40 ~ 82 | 40 ~ 82 | 40 ~ 120 | 40 ~ 120 | 36 ~ 155 | 46 ~ 82 | 46 ~ 82 | 62 ~ 89 | 34 ~ 175 | 100 ~ 200 | 55 ~ 95 | 100 ~ 150 | 30 ~ 75 | 70 ~ 120 | 34 ~ 120 | 46 ~ 70 | 120 ~ 135 | 80 ~ 200 | 57 ~ 115 | 57 ~ 92 | 46 ~ 75 | 46 ~ 75 | 40 ~ 82 | 46 ~ 150 | 34 ~ 95 | 100 ~ 150 | 46 ~ 95 | 62 | 80 ~ 250 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy