(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - V Coated, Long Shank, V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Short Screw, OT-S-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, SPT-NPSF
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Days to Ship: | 8 Days or more |
---|
Tapered Tap Series for American Piping General Use (NPT) TPT
OSG
Used to process tapered female pipe threads. Mainly used for connecting pipes
Days to Ship: | 8 Days or more |
---|
Threading Tools - High Speed Steel, EX-S-MCT
OSG
Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - High Speed Steel, CTG Conduit Tap, Thick
SKC
•Thread Types : Others
•Thread Size (Nominal) : CTG-16, CTG-22, CTG-28, CTG-36, CTG-42, CTG-54
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
For complete product overview and details on C.T.G Thick Conduit Pipe Screw Tap, see the sections below:
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - High Speed Steel, PG Conduit Tap
SKC
•Thread Types : Others
•Thread Size (Nominal) : PG11, PG13.5, PG16, PG21, PG29, PG36, PG42, PG7, PG9
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
For complete product overview and details on Pg Conduit Thread Tap (German Standard), see the sections below:
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - Solid Type, for Gas Pipes, NPT
SKC
•Thread Size (Nominal) : NPT11/2, NPT11/4, NPT1, NPT1/2, NPT1/4, NPT1/8, NPT3/4, NPT3/8, NPT5/8, NPT7/8
•Pitch (P), Thread Count : 11 1/2, 14, 18, 27
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Die
For complete product overview and details on Gas Pipe Solid Die Taper NPT, see the sections below:
Days to Ship: | 9 Days or more |
---|
Round Threading Dies - Steel, Solid Type, Parallel Thread, NSP
SKC
•Thread Size (Nominal) : NPS11/2, NPS11/4, NPS1, NPS1/2, NPS1/4, NPS1/8, NPS3/4, NPS3/8, NPS5/8, NPS7/8
•Pitch (P), Thread Count : 11 1/2, 14, 18, 19, 27, 28
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Die
For complete product overview and details on Gas Pipe Solid Die Parallel NSP, see the sections below:
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - High Speed Steel, SU Type
SKC
•Thread Types : Meter
•Thread Size (Nominal) : M10, M12, M14, M16, M18, M20, M22, M24, M27, M3, M30, M33, M36, M4, M5, M6, M8
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), Heat-Treated Steel (25 - 35 HRC), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Stainless Steel (SUS), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Spiral Tap
For complete product overview and details on Stainless Steel-Use SU Spiral-Type, see the sections below:
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - High Speed Steel, SX Type
SKC
•Tap Model: Spiral Tap
•Material: SKH
Days to Ship: | 9 Days or more |
---|
Threading Tools - High Speed Steel, Tire Valve Screw
SKC
•Thread Size (Nominal) : CTV5, CTV8, TV10, TV5, TV8
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Point Tap
•Bore Model : For Blind Holes
For complete product overview and details on Tire Valve Screw, see the sections below:
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series
YAMAWA
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - Dry Tapping, Through Hole Use, HDISL Series
YAMAWA
[Features]
· Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.
· Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - Ultra Fast Tapping, Vertical Use, HFIHS Series
YAMAWA
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series
YAMAWA
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Cobalt High Speed Steel, Helical Thread, MC-HLC
YAMAWA
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - TiN Coated, Through Hole Use, AU+SL
YAMAWA
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P
YAMAWA
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - For Titanium Alloys, ZET-B
YAMAWA
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
Days to Ship: | 8 Days or more |
---|
Hand Taps - for Left Hand Threads, HT(LH)
YAMAWA
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Plus Series, TiN Coated, AU+ SP
YAMAWA
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
[Features]
· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
· Completely threaded to prevent the blade from chipping.
· Reduction of friction resistance and tapping torque.
· Maintains screw guidance (stable machining).
· Maintains excellent chip discharge performance (smooth discharge).
[Applications]
· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
· Ideal for water soluble cutting fluids.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - TiN Coated, Long Shank, LS-PO-V(LS-N-PO-V)
YAMAWA
LS-N-PO-V is available as long as it lasts. LS-PO-V takes the place of LS-N-PO-V.
Days to Ship: | 9 Days or more |
---|
Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, Short Screw, CT-S-PT
YAMAWA
•Tap Model: Pipe Tap
•Thread Type: Pipe Taper
•Number Of Chamfered Threads Lcf: 2.5P
•Tool Material Type: Carbide
•Class: Ⅱ
Days to Ship: | 9 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT
YAMAWA
For standard pipe taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Long Screw, CT-PT
YAMAWA
•Thread Types : Pipe Taper
•Thread Size (Nominal) : 1-¦-11, 1/2-14, 1/4-19, 1/8-28, 3/4-14, 3/8-19
•Number of Chamfered Threads (Lcf) : 2.5P
•Tool Material Type : Carbide
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Ductile Cast Iron (FCD), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
•Bore Model : For Blind Holes, For thru Holes
For complete product overview and details on For Tapered Screw for Pipe (Long Screw Type for Use with Cast Iron Hard) CT-PT, see the sections below:
Days to Ship: | 9 Days or more |
---|
Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PF
YAMAWA
A tap suitable for thread machining of hard and brittle material such as cast iron.
Days to Ship: | 9 Days or more |
---|
Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PS
YAMAWA
•Thread Types : Pipe Parallel
•Thread Size (Nominal) : 1-¦-11, 1/2-14, 1/4-19, 1/8-28, 3/4-14, 3/8-19
•Number of Chamfered Threads (Lcf) : 3.5P
•Tool Material Type : Carbide
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Ductile Cast Iron (FCD), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
•Bore Model : For Blind Holes, For thru Holes
For complete product overview and details on For Parallel Screw for Pipe (Hard) CT-PS, see the sections below:
Days to Ship: | 9 Days or more |
---|
Spiral Flute Taps - Fast Tapping, Through Hole Use, F-SL
YAMAWA
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for High Carbon Steels, Through Hole Use, HC+PO/HC-PO
YAMAWA
It is suitable for tapping high carbon steel such as S55C.
Days to Ship: | 9 Days or more |
---|
Spiral Point Taps - High Speed Steel, Deep Hole Machining, S-PO
YAMAWA
A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
Days to Ship: | 9 Days or more |
---|
Thread Mills - Carbide, Helical Thread, MC-CSLC
YAMAWA
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.
Days to Ship: | 9 Days or more |
---|
Spiral Point Taps - Carbide, TiAlN Coated, HFICT-B
YAMAWA
Carbide tap that makes ultra-high speed machining possible and a center-through hole shape adopted to support internal lubrication, mist type lubrication and low temperature cold/dry machining. Suitable for blind holes in cast iron.
Days to Ship: | 9 Days or more |
---|
Spiral Point Taps - Carbide, Through Hole Use, HFICT-P
YAMAWA
Carbide tap that makes ultra-high speed machining possible and a side-through hole shape adopted to support internal lubrication, mist type lubrication and low temperature cold/dry machining. Suitable for through holes in cast iron.
Days to Ship: | 9 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SKC | SKC | SKC | SKC | SKC | SKC | SKC | SKC | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT | Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT | Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT | Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-TPT | Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT | Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT | Parallel Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-SPT | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, SPT-NPSF | Tapered Tap Series for American Piping General Use (NPT) TPT | Parallel Pipe Taps - High Speed Steel, CTG Conduit Tap, Thick | Round Threading Dies - Steel, Solid Type, Parallel Thread, NSP | Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series | Spiral Flute Taps - Dry Tapping, Through Hole Use, HDISL Series | Spiral Flute Taps - Ultra Fast Tapping, Vertical Use, HFIHS Series | Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series | Thread Mills - Cobalt High Speed Steel, Helical Thread, MC-HLC | Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P | Spiral Point Taps - TiN Coated, Long Shank, LS-PO-V(LS-N-PO-V) | Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, Short Screw, CT-S-PT | Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT | Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PF | Parallel Pipe Taps - Carbide, for Difficult-to-Cut Materials, CT-PS | Spiral Point Taps - for High Carbon Steels, Through Hole Use, HC+PO/HC-PO | Spiral Point Taps - High Speed Steel, Deep Hole Machining, S-PO | |||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more |
Thread Types | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Parallel | Pipe Parallel | Pipe Taper | Meter | Others | Others | - | - | Meter | Meter / Wit | - | Meter | Meter | Meter | Meter | Meter | Meter / Pipe Taper / Pipe Parallel | Meter | Meter | Meter | Meter | Meter | Meter | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Parallel | Pipe Parallel | Meter | Meter | Meter | Meter / Pipe Taper / Pipe Parallel | Meter | Meter |
Thread Size (Nominal) | M3 ~ M24 | M5 ~ M10 | M4 ~ M6 | 1/2UN ~ M36 | M3 ~ M20 | M6 | M8 ~ M12 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | G1/2 ~ G3/8 | NPS1/16 | NPT1/8 | M8 | CTG-54 ~ CTG-16 | PG7 ~ PG42 | NPT3/8 | NPS1 ~ NPS7/8 | M10 ~ M14 | W1 ~ M48 | TV8 | M13 | M6 ~ M20 | M6 ~ M20 | M6 ~ M20 | M6 ~ M20 | 1015 ~ 32506N300M | M3 ~ M6 | M3 ~ M20 | M3 ~ M20 | M2.5 ~ M8 | M2 ~ M12 | M3 ~ M12 | 1/2-14 ~ 3/8-19 | 1/4-19 | 1´-11 ~ 3/8-19 | 1´-11 ~ 3/8-19 | 1´-11 ~ 3/8-19 | M3 ~ M12 | M1.4 ~ M24 | M2 ~ M30 | 06510X28R ~ 200505N300M | M6 ~ M12 | M6 ~ M12 |
Pitch (P), Thread Count(mm) | 0.5 ~ 3 | 0.8 ~ 1.25 | 0.7 ~ 1 | 0.3 ~ 44 | 0.5 ~ 2 | 1 | 1.25 ~ 1.75 | 14 ~ 28 | 14 ~ 28 | 11 ~ 19 | 11 ~ 28 | 14 ~ 28 | 27 | 27 | 1.25 | 11 ~ 14 | 16 ~ 20 | 18 | 11 1/2 ~ 28 | 1.5 ~ 2 | 0.5 ~ 20 | 32 | 0.5 | 1 ~ 1.75 | 1 ~ 1.75 | 1 ~ 1.75 | 1 ~ 1.75 | - | 0.5 ~ 1 | 0.5 ~ 2.5 | 0.5 ~ 2.5 | 0.45 ~ 0.75 | 0.4 ~ 1.75 | 0.5 ~ 1.75 | - | - | - | - | - | 0.5 ~ 1.75 | 0.3 ~ 3 | 0.4 ~ 3.5 | 0.5 ~ 3 | 1 ~ 1.75 | 1 ~ 1.75 |
Number of Chamfered Threads (Lcf) | 5P | 5P | 5P | 5P | 5P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 4P | 2.5P | 3P | - | - | - | - | - | - | - | 5P | 2.5P | 5P | 2.5P | 2.5P | - | 5P | 5P | 3P | 5P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 3.5P | 3.5P | 5P | 5P | 5P | - | 2.5P | 4P |
Tool Material Type | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Carbide | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | High-Speed Steel | High-Speed Steel | - | - | - | - | High-Speed Steel | - | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide |
Work Material | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[◎] | Ductile Cast Iron (FCD)[○/◎] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] |
Tap Model | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Tapping Related Tools | Pipe Tap | Pipe Tap | Die | Die | Spiral Tap | Spiral Tap | Point Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Tapping Cutter | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Point Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Spiral Tap | Point Tap | Point Tap | Tapping Cutter | Point Tap | Point Tap |
Bore Model | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | - | - | - | - | - | For Blind Holes | - | For Through Holes / For Blind Holes | For Through Holes | For Blind Holes | For Through Holes / For Blind Holes | - | For Through Holes | For Through Holes | For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes |
Coating Presence | Included | Included | Included | None | None | None | None | None | None | None | None | None | None | None | None | - | - | - | - | - | - | None | - | Included | Included | Included | Included | Included | Included | None | None | None | Included | Included | None | None | None | None | None | Included | None | None | Included | Included | Included |
Coating Type | TiN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | - | - | - | - | Non-Coated | - | TiCN | TiCN | TiCN | TiCN | TiN | TiN | - | - | - | TiN | TiN | - | - | - | - | - | TiN | - | - | TiAlN | TiAlN | TiAlN |
Overall Length (L)(mm) | 100 ~ 200 | 60 ~ 75 | 100 | 34 ~ 155 | 100 ~ 150 | 62 | 150 | 55 ~ 80 | 55 ~ 80 | 62 ~ 95 | 120 ~ 150 | 55 ~ 80 | 55 | 55 | 70 | 80 ~ 120 | 85 ~ 135 | - | - | - | - | 70 | - | 62 ~ 105 | 62 ~ 105 | 62 ~ 105 | 62 ~ 105 | 70 ~ 200 | 46 ~ 62 | 46 ~ 105 | 46 ~ 105 | 46 ~ 70 | 42 ~ 82 | 100 ~ 150 | 55 ~ 80 | 150 | 55 ~ 95 | 55 ~ 95 | 55 ~ 95 | 46 ~ 82 | 36 ~ 120 | 42 ~ 135 | 50 ~ 140 | 62 ~ 82 | 62 ~ 82 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy