(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machinin ...Readmore
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap. ▲ Close
Days to Ship |
|
---|
Forming Taps - VP New Roll, Grooveless, VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: | 8 Days or more |
---|
Forming Taps - TiN Coated, Grooveless, TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Model A Series, V Coated, A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT
MISUMI
Now offering a special price on threading cutters for stable, high-speed machining
Days to Ship: | 10 Days or more |
---|
Forming Taps - X Performer, Grooveless, S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, HT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML
MISUMI
TS-coated version of the popular threading cutter
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】
MISUMI
Also available: high-precision toothed 1.5P version for blind hole drilling, and a long shank version ideal for deep threading of workpieces(C-Value)
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Spiral Point Taps - for Stainless Steels, Oxidized, SU+PO/SU-PO
YAMAWA
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, Through Hole/Blind Hole Use
YAMAWA
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)
YAMAWA
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT
MISUMI
Proprietary coating and geometry for left-flute left-rotary cutting enables milling threading of hard steel up to HRC62.
Days to Ship: | 10 Days or more |
---|
Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
MISUMI
Carbide taps with dramatically improved tool life (C-Value
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Spiral Flute Taps - High Speed Steel, MT-SPFT
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
Special Price | |
Days to Ship: | Same day or more |
Show Stock Products
Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Hand Taps - for Left Hand Threads, HT(LH)
YAMAWA
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML
MISUMI
Threading cutters for stable high-speed processing are available at a special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Carbide, SEC-SPFT
MISUMI
Ideal for high-volume, high-speed machining of non-ferrous metals (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】
MISUMI
Supports all work materials from standard steel to difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - General Purpose, Oxidized, EX-H-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
Special Price | |
Days to Ship: | Same day |
Show Stock Products
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT
OSG
Suitable for blind hole machining in high carbon materials such as medium carbon steel and higher, die steel, alloy steel, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT
OSG
Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, Long Shank, EX-LT
OSG
Long shank type.
For complete product overview and details on Hand Taps - High Speed Steel, Long Shank, EX-LT see the sections below:
Days to Ship: | 8 Days or more |
---|
Hand Taps - for Difficult-To-Cut Materials, CPM-HT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - V Coated, Long Shank, V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
Brand | OSG | OSG | OSG | MISUMI | OSG | MISUMI | OSG | MISUMI | MISUMI | YAMAWA | YAMAWA | YAMAWA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | YAMAWA | OSG | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
Product Series | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT | Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】 | Spiral Point Taps - for Stainless Steels, Oxidized, SU+PO/SU-PO | Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP) | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT | Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】 | Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】 | Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series | Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT | Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series | Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series | Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】 | Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】 | Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT | Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT | Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT | Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC | ||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter / Unified | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Pipe Taper | Meter | Meter | Meter / Unified / Wit | Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter / Pipe Taper / Pipe Parallel | Meter / Unified / Pipe Taper | Meter | Meter | Meter | Meter | Meter |
Thread Size (Nominal) | M1 ~ M12 | No0UN ~ M20 | 1-8UNC ~ M56 | M1.4 ~ M20 | M1 ~ M45 | M3 ~ M10 | R1"1/4 ~ R5/8 | M3 ~ M12 | M3 ~ M10 | No.10-32UNF ~ M16 | No.10-24UNC | M2 ~ M6 | M2 ~ M12 | M2 ~ M12 | M2 ~ M12 | M3 ~ M10 | M2 ~ M24 | M2 ~ M24 | - | M3 ~ M10 | M1.4 ~ M42 | M3 ~ M30 | 1/2-20UNF ~ M24 | M2.5 ~ M8 | M2 ~ M24 | M3 ~ M20 | M3 ~ M10 | M2 ~ M12 | M3 ~ M10 | M1.4 ~ M16 | M3 ~ M16 | M3 ~ M16 | M5 ~ M24 | M5 ~ M10 | M10 ~ M12 | M2.6 ~ M10 | 3/8UN ~ M12 | M12 | - | - | - | M3 ~ M24 | M8 ~ M10 | M4 ~ M6 | M2 ~ M42 |
Pitch (P), Thread Count(mm) | 0.25 ~ 56 | 0.25 ~ 80 | 0.25 ~ 5.5 | 0.3 ~ 2.5 | 0.2 ~ 4.5 | 0.5 ~ 1.5 | 11 ~ 14 | 0.5 ~ 1.75 | 0.5 ~ 1.5 | 0.35 ~ 2 | - | 0.4 ~ 1 | 0.4 ~ 1.75 | 0.4 ~ 1.75 | 0.4 ~ 1.75 | 0.5 ~ 1.5 | 0.4 ~ 3 | 0.4 ~ 3 | 0.25 ~ 32 | 0.5 ~ 1.5 | 0.3 ~ 4.5 | 0.5 ~ 3.5 | 0.25 ~ 3 | 0.45 ~ 0.75 | 0.25 ~ 3 | 0.5 ~ 2.5 | 0.5 ~ 1.5 | 0.4 ~ 1.75 | 0.5 ~ 1.5 | 0.3 ~ 2 | 0.5 ~ 2 | 0.5 ~ 2 | 0.8 ~ 3 | 0.8 ~ 1.5 | 1.25 ~ 1.5 | 0.45 ~ 1.5 | 1.25 ~ 16 | 1.75 | 1 ~ 19 | 1 ~ 28 | 0.5 ~ 3 | 0.5 ~ 3 | 1 ~ 1.25 | 0.7 ~ 1 | 0.4 ~ 4.5 |
Number of Chamfered Threads (Lcf) | 2P ~ 4P | 2P ~ 4P | 1.5P ~ 2.5P | - | 2P ~ 4P | 1.5 P ~ 9 P | 2.5P | - | 1.5 P ~ 2.5 P | 5P | 5P | 2.5P | - | 2.5 P | 5 P | 1.5 P ~ 3 P | 2.5 P | 5 P | - | 3P | 5P | 6P | 5P | 5P | 5P | - | 1.5 P ~ 2.5 P | 2.5 P | 5 P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 3P | 2.5P | 1.5P ~ 5P | 2P ~ 5P | - | - | - | 5P | 5P | 5P | 5P |
Tool Material Type | Powdered High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel / Vanadium High-Speed Steel | Carbide | Powdered High-Speed Steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-Speed Steel | Carbide | Vanadium High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Carbide | Carbide | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
Work Material | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[◎] | Cast Steel (SC)[◎] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[◎] | Cast Steel (SC)[○] | Cast Steel (SC)[◎] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[◎] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[○] | Cast Steel (SC)[◎] | Cast Steel (SC)[◎] | Cast Steel (SC)[○] |
Tap Model | Rolled Tap | Rolled Tap | Spiral Tap | Tapping Cutter | Rolled Tap | Hand Tap | Pipe Tap | Tapping Cutter | Spiral Tap | Point Tap | Hand Tap | Spiral Tap | Tapping Cutter | Spiral Tap | Point Tap | Hand Tap | Spiral Tap | Point Tap | Tapping Cutter | Spiral Tap | Point Tap | Point Tap | Point Tap | Hand Tap | Point Tap | Tapping Cutter | Spiral Tap | Spiral Tap | Point Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Tapping Cutter | Tapping Cutter | Tapping Cutter | Point Tap | Point Tap | Point Tap | Point Tap |
Bore Model | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes |
Coating Presence | Included | Included | Included | Included | Included | None | None | Included | Included | None | None | None | Included | None | None | None | None | None | Included | Included | Included | Included | Included | None | Included | Included | None | None | Included | Included | Included | Included | None | Included | None | None | None | None | Included | Included | Included | Included | Included | Included | None |
Coating Type | TiCN | TiN | Others | TiAlN | TiCN | - | Non-Coated | For High Hardness (Silicone-Based) | TiN | - | - | - | TiAlN | - | - | - | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) / Others | TiN | TiN | TiN | Others | - | Others | TiAlN | - | - | TiN | TiN | TiN | Others | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiAlN | TiAlN | TiN | TiCN | TiCN | Non-Coated |
Overall Length (L)(mm) | 30 ~ 82 | 30 ~ 105 | 34 ~ 250 | 39 ~ 105 | 30 ~ 220 | 46 ~ 75 | 82 ~ 105 | 48 ~ 74 | 46 ~ 150 | 36 ~ 700 | 60 | 42 ~ 62 | 58 ~ 73 | 40 ~ 82 | 40 ~ 82 | 46 ~ 75 | 40 ~ 120 | 40 ~ 120 | 40 | 100 ~ 150 | 34 ~ 175 | 100 ~ 200 | 34 ~ 120 | 46 ~ 70 | 80 ~ 200 | 57 ~ 115 | 46 ~ 75 | 40 ~ 82 | 46 ~ 150 | 34 ~ 95 | 100 ~ 150 | 46 ~ 95 | 60 ~ 120 | 60 ~ 75 | 75 ~ 82 | 44 ~ 75 | 150 | 82 | 80 ~ 210 | 60 ~ 120 | 60 ~ 120 | 100 ~ 200 | 70 ~ 75 | 100 | 40 ~ 175 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy