(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 2/22 to 5:00 p.m. (CST) 2/23/2025. We apologize for the inconvenience.

Screw Hole Related Tools(Work Material:Tool Steel (Before SKD Quenching))

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machinin ...Readmore

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.  ▲ Close

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
  • 17 Days or Less
  1. 1
  • Spiral Flute Taps - Model A Series, V Coated, A-SFT

    Spiral Flute Taps - Model A Series, V Coated, A-SFT

    OSG

    Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

    Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

    MISUMI

    Now offering a special price on threading cutters for stable, high-speed machining

    • Volume Discount
    Days to Ship: 10 Days or more
  • Hand Taps - High Speed Steel, HT

    Hand Taps - High Speed Steel, HT【10 Pieces Per Package】

    MISUMI

    Now offering the standard sizes at a limited-time-only special price (C-Value)

    • Volume Discount
    Days to Ship: Same day or more

    Show Stock Products

  • Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML

    Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML

    MISUMI

    TS-coated version of the popular threading cutter

    • Volume Discount
    Days to Ship: 8 Days or more
    • On Sale Till 07/03/2025

    Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT

    Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT

    OSG

    The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

    • Volume Discount
    Special Price
    Days to Ship: Same day or more

    Show Stock Products

  • Hand Taps - High Speed Steel, Through Hole/Blind Hole Use

    Hand Taps - High Speed Steel, Through Hole/Blind Hole Use

    YAMAWA

    Hand tap used for general tapping work.[Features]· High blade tip strength makes it suitable for work materials that are easily worn.· More suitable for manual work compared to taps of other shapes.· 2 types are available, with 5P or 1.5P biting threads.· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.· Machining with mechanical machinery is also possible.· Has straight gro...Readmore

    • Volume Discount
    Days to Ship: 8 Days or more
  • Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

    Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

    MISUMI

    Proprietary coating and geometry for left-flute left-rotary cutting enables milling threading of hard steel up to HRC62.

    • Volume Discount
    Days to Ship: 10 Days or more
  • Spiral Point Taps - High Speed Steel, Through Hole Use

    Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】

    MISUMI

    Now offering the standard sizes at a limited-time-only special price (C-Value)

    • Volume Discount
    Days to Ship: 8 Days or more
    • On Sale Till 07/03/2025
    • New Products

    Spiral Flute Taps - High Speed Steel, MT-SPFT

    Spiral Flute Taps - High Speed Steel, MT-SPFT

    MISUMI

    NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues. SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.

    • Volume Discount
    Special Price
    Days to Ship: Same day or more

    Show Stock Products

    • New Products

    Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP

    Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP

    MISUMI

    NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues. SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

    Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

    OSG

    Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

    Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

    OSG

    Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Hand Taps - for Left Hand Threads, HT(LH)

    Hand Taps - for Left Hand Threads, HT(LH)

    YAMAWA

    It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - Cobalt High Speed Steel, Through Hole Use, EH-PO

    Spiral Point Taps - Cobalt High Speed Steel, Through Hole Use, EH-PO

    YAMAWA

    Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

    • Volume Discount
    Days to Ship: 10 Days or more
  • Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

    Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

    OSG

    Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML

    Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML

    MISUMI

    Threading cutters for stable high-speed processing are available at a special price (C-Value)

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - High Speed Steel, M-SPFT

    Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】

    MISUMI

    Supports all work materials from standard steel to difficult-to-cut materials

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT

    Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT

    OSG

    Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT

    Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT

    OSG

    Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - High Speed Steel, V Coated, V-SFT

    Spiral Flute Taps - High Speed Steel, V Coated, V-SFT

    OSG

    Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT

    Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT

    OSG

    Suitable for blind hole machining in high carbon materials such as medium carbon steel and higher, die steel, alloy steel, etc.

    • Volume Discount
    Days to Ship: 8 Days or more
    • On Sale Till 07/03/2025

    Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT

    Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT

    OSG

    The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

    • Volume Discount
    Special Price
    Days to Ship: Same day or more

    Show Stock Products

  • Hand Taps - for Difficult-To-Cut Materials, CPM-HT

    Hand Taps - for Difficult-To-Cut Materials, CPM-HT

    OSG

    The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT

    Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT

    OSG

    Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - High Speed Steel, V Coated, V-POT

    Spiral Point Taps - High Speed Steel, V Coated, V-POT

    OSG

    Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - V Coated, Long Shank, V-LT-POT

    Spiral Point Taps - V Coated, Long Shank, V-LT-POT

    OSG

    Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT

    Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT

    OSG

    The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT

    Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT

    OSG

    The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

    • Volume Discount
    Days to Ship: 8 Days or more
  • Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, CPM-TPT

    Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, CPM-TPT

    OSG

    The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

    • Volume Discount
    Days to Ship: 8 Days or more
  • Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT

    Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT

    OSG

    The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

    • Volume Discount
    Days to Ship: 8 Days or more
  • Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT

    Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT

    OSG

    The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

    • Volume Discount
    Days to Ship: 8 Days or more
  • Thread Mills - Carbide, Micro Tool, MMTS

    Thread Mills - Carbide, Micro Tool, MMTS

    NS TOOL

    •Thread Types : Others•Thread Size (Nominal) : S0.1, S0.2, S0.3, S0.4, S0.5, S0.6, S0.8, S1, S1.2, S1.4•Tool Material Type : Carbide•Work Material : Alloy Steel (SCM), Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Heat-Treated Steel (25 - 35 HRC), Heat-Treated Steel (35 - 45 HRC), Heat-Treated Steel (45 - 55 HRC), High-Carbon Steel (C Content Exceeding 0.45%), High-Hardness Steel (50 - 60 HRC), Lo...Readmore

    • Volume Discount
    Days to Ship: 8 Days or more
  • Parallel Pipe Taps - High Speed Steel, CTG Conduit Tap, Thick

    Parallel Pipe Taps - High Speed Steel, CTG Conduit Tap, Thick

    SKC

    •Thread Types : Others•Thread Size (Nominal) : CTG-16, CTG-22, CTG-28, CTG-36, CTG-42, CTG-54•Tool Material Type : High-Speed Steel•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), ...Readmore

    • Volume Discount
    Days to Ship: 8 Days or more
  • Parallel Pipe Taps - High Speed Steel, PG Conduit Tap

    Parallel Pipe Taps - High Speed Steel, PG Conduit Tap

    SKC

    •Thread Types : Others•Thread Size (Nominal) : PG11, PG13.5, PG16, PG21, PG29, PG36, PG42, PG7, PG9•Tool Material Type : High-Speed Steel•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.2...Readmore

    • Volume Discount
    Days to Ship: 8 Days or more
  • Hand Taps - Metric Fine

    Hand Taps - Metric Fine

    SKC

    •Tap Model: Hand Tap•Thread Type: Meter

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series

    Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series

    YAMAWA

    Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.

    • Volume Discount
    Days to Ship: 10 Days or more
  • Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series

    Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series

    YAMAWA

    Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.

    • Volume Discount
    Days to Ship: 10 Days or more
  • Spiral Point Taps - High Speed Steel, TiN Coated, PO-V(N-PO-V)

    Spiral Point Taps - High Speed Steel, TiN Coated, PO-V(N-PO-V)

    YAMAWA

    Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - TiN Coated, Through Hole Use, AU+SL

    Spiral Flute Taps - TiN Coated, Through Hole Use, AU+SL

    YAMAWA

    A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P

    Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P

    YAMAWA

    A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - For Titanium Alloys, ZET-B

    Spiral Flute Taps - For Titanium Alloys, ZET-B

    YAMAWA

    A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - Plus Series, TiN Coated, AU+ SP

    Spiral Flute Taps - Plus Series, TiN Coated, AU+ SP

    YAMAWA

    Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintai...Readmore

    • Volume Discount
    Days to Ship: 8 Days or more
  • Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT

    Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT

    YAMAWA

    For standard pipe taps, it is used when the protruding length of the screw is insufficient.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - Fast Tapping, Through Hole Use, F-SL

    Spiral Flute Taps - Fast Tapping, Through Hole Use, F-SL

    YAMAWA

    Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.

    • Volume Discount
    Days to Ship: 8 Days or more
  • Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

    Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

    OSG

    Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

    • Volume Discount
    Days to Ship: 8 Days or more

Loading...

  1. 1

Related Categories to Screw Hole Related Tools