(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Forming Taps - TiN Coated, Grooveless, TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Model A Series, V Coated, A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Days to Ship: | 8 Days or more |
---|
Forming Taps - X Performer, Grooveless, S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Deep Hole Machining, SU-S-SP
YAMAWA
[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Days to Ship: | 8 Days or more |
---|
Forming Taps - VP New Roll, Grooveless, VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】
MISUMI
Also available: high-precision toothed 1.5P version for blind hole drilling, and a long shank version ideal for deep threading of workpieces(C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Copper, CrN Coated, CU-POT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT
MISUMI
Proprietary coating and geometry for left-flute left-rotary cutting enables milling threading of hard steel up to HRC62.
Days to Ship: | 10 Days or more |
---|
Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】
MISUMI
Supports all work materials from standard steel to difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, HT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
Spiral Flute Taps - High Speed Steel, MT-SPFT
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Days to Ship: | Same day or more |
---|
Show Stock Products
Spiral Flute Taps - Deep Hole Machining, High Speed Steel, SUS-DH-SFT
OSG
Ideal for deep-hole processing of stainless steel over 2D
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Spiral Fluted, for Stainless Steels, SUS-SFT-TPT
OSG
[Specifications]
· Shape: Pipe tap
· Screw type: pipe taper
· Coating: Non-Coated
· Work Material: Stainless Steel
Days to Ship: | 8 Days or more |
---|
Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, Micro Tool, MMTS
NS TOOL
•Thread Types : Others
•Thread Size (Nominal) : S0.1, S0.2, S0.3, S0.4, S0.5, S0.6, S0.8, S1, S1.2, S1.4
•Tool Material Type : Carbide
•Work Material : Alloy Steel (SCM), Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Heat-Treated Steel (25 - 35 HRC), Heat-Treated Steel (35 - 45 HRC), Heat-Treated Steel (45 - 55 HRC), High-Carbon Steel (C Content Exceeding 0.45%), High-Hardness Steel (50 - 60 HRC), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Stainless Steel (SUS), Thermoplastic (PVC, Nylon etc.), Thermosetting Plastic (Bakelite, Phenol etc.), Titanium Alloy (Ti-6Al-4V Equivalent), Tool Steel (Before SKD Quenching)
•Tap Model : Tapping Cutter
For complete product overview and details on MMTS Micro Threading Tool, see the sections below:
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, SL-TF
TANOI
•Thread Types : Meter
•Thread Size (Nominal) : M10, M11, M12, M14, M16, M18, M2, M2.3, M2.5, M2.6, M20, M3, M3.5, M4, M5, M6, M7, M8, M9
•Number of Chamfered Threads (Lcf) : 1P, 2P
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)
•Tap Model : Rolled Tap
For complete product overview and details on Seamless TAFLET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Deep Hole Machining, Oxidized, S-SP
YAMAWA
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - for Tough Stainless Steels, Oxidized, SU2-SP
YAMAWA
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - TiCN Coated, Through Hole Use, SGPO
Nachi-Fujikoshi
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML
MISUMI
Threading cutters for stable high-speed processing are available at a special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT
MISUMI
Now offering a special price on threading cutters for stable, high-speed machining
Days to Ship: | 10 Days or more |
---|
Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML
MISUMI
TS-coated version of the popular threading cutter
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
Forming Taps - High Speed Steel, Oxidized, TFST
Nachi-Fujikoshi
A rise up type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips.
· Less inconsistent screw precision.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.
Days to Ship: | 8 Days or more |
---|
G Spiral Tap for Deep Holes in Stainless Steel GSPS
Nachi-Fujikoshi
Coating tap suitable for stainless steel and places prone to chip clogging.
[Features]
· Adopts powdered high-speed steel with excellent wear resistance.
· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.
· A thick neck, which eliminates chipping and wrapping of chips, has been adopted.
[Applications]
· Coating tap suitable for stainless steel and places prone to chip clogging.
Days to Ship: | 8 Days or more |
---|
Forming Taps - Blind Hole Machining, Long Shank, TFSTL
Nachi-Fujikoshi
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
[Applications]
· Ideal for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.
· For standard dimensions, it is convenient when the protrusion length is insufficient.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT
OSG
Achieves female thread machining of stainless steel using water-soluble cutting fluid
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, Long Shank, EX-LT-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - For Copper, CrN Coated, CU-SFT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
Days to Ship: | 8 Days or more |
---|
Hand Taps - for Stainless Steels, Oxidized, EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
Days to Ship: | Same day |
---|
Show Stock Products
Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Brand | OSG | OSG | OSG | OSG | OSG | YAMAWA | OSG | OSG | OSG | MISUMI | MISUMI | OSG | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | NS TOOL | TANOI | YAMAWA | YAMAWA | OSG | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
Product Series | Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series | Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series | Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC | Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT | Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】 | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT | Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】 | Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】 | Spiral Flute Taps - Deep Hole Machining, High Speed Steel, SUS-DH-SFT | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT | Taper Pipe Taps - Spiral Fluted, for Stainless Steels, SUS-SFT-TPT | Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT | Spiral Flute Taps - for Tough Stainless Steels, Oxidized, SU2-SP | Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT | Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】 | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT | Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT | Spiral Flute Taps - High Speed Steel, Long Shank, EX-LT-SUS-SFT | ||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 8 Days or more | 8 Days or more |
Thread Types | Meter / Unified | Meter / Unified | Meter / Unified | Meter | Meter / Unified | Meter | Meter / Pipe Taper / Pipe Parallel | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified / Wit | Meter | Pipe Taper | Meter / Unified | Others | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
Thread Size (Nominal) | No0UN ~ M20 | - | 1-8UNC ~ M56 | M1 ~ M45 | 1/2-20UNF ~ M24 | M3 ~ M20 | - | M3 ~ M12 | M1 ~ M12 | M3 ~ M10 | M2 ~ M24 | M3 ~ M30 | M3 | M2 ~ M12 | M2 ~ M12 | M3 ~ M10 | M3 ~ M10 | M2 ~ M24 | M2.6 ~ M10 | 1/2UN ~ M27 | M5 ~ M10 | G1/2 ~ G3/8 | M1 ~ M12 | S0.1 ~ S1.4 | M2 ~ M20 | M2 ~ M30 | M3 ~ M24 | M2 ~ M24 | M3 ~ M24 | M3 ~ M20 | M1.4 ~ M20 | M3 ~ M12 | M3 ~ M10 | M1.4 ~ M10 | M8 ~ M16 | M3 ~ M10 | M2 ~ M24 | M1.4 ~ M16 | M3 ~ M16 | M3 ~ M16 | M8 ~ M10 | M10 | M3 | - | M1.4 ~ M42 |
Pitch (P), Thread Count(mm) | 0.25 ~ 80 | 0.25 ~ 32 | 0.25 ~ 5.5 | 0.2 ~ 4.5 | 0.25 ~ 3 | 0.5 ~ 2.5 | 1 ~ 19 | 0.5 ~ 1.75 | 0.25 ~ 56 | 0.5 ~ 1.5 | 0.4 ~ 3 | 0.5 ~ 3.5 | 0.5 | 0.4 ~ 1.75 | 0.4 ~ 1.75 | 0.5 ~ 1.5 | 0.5 ~ 1.5 | 0.4 ~ 3 | 0.45 ~ 1.5 | 0.45 ~ 40 | 0.8 ~ 1.25 | 14 ~ 28 | 0.25 ~ 56 | 0.025 ~ 0.3 | 0.4 ~ 2.5 | 0.4 ~ 3.5 | 0.5 ~ 3 | 0.25 ~ 3 | 0.5 ~ 3 | 0.5 ~ 2.5 | 0.3 ~ 2.5 | 0.5 ~ 1.75 | 0.5 ~ 1.5 | 0.3 ~ 1.5 | 1.25 ~ 2 | 0.5 ~ 1.5 | 0.4 ~ 3 | 0.3 ~ 2 | 0.5 ~ 2 | 0.5 ~ 2 | 1.25 ~ 1.5 | 1.5 | 0.5 | 0.5 ~ 3 | 0.3 ~ 4.5 |
Number of Chamfered Threads (Lcf) | 2P ~ 4P | - | 1.5P ~ 2.5P | 2P ~ 4P | 5P | 2.5P | - | 2P ~ 4P | 2P ~ 4P | 1.5 P ~ 2.5 P | 5 P | 6P | 5P | - | 2.5 P | 5 P | 1.5 P ~ 9 P | 2.5 P | 2.5P | 2.5P | 5P | 2.5P | 2P ~ 4P | - | 1P ~ 2P | 2.5P | 3P | 5P | 5 | - | - | - | 2 P ~ 4 P | 2P ~ 4P | 2.5P | 2P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P | - | 5P |
Tool Material Type | Vanadium High-Speed Steel | Carbide | Powdered High-Speed Steel / Vanadium High-Speed Steel | Powdered High-Speed Steel / Vanadium High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Cobalt High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Cobalt High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | High-Speed Steel | Alloy High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel |
Work Material | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○/◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[○] | Stainless Steel (SUS)[◎] |
Tap Model | Rolled Tap | Tapping Cutter | Spiral Tap | Rolled Tap | Point Tap | Spiral Tap | Tapping Cutter | Rolled Tap | Rolled Tap | Spiral Tap | Point Tap | Point Tap | Point Tap | Tapping Cutter | Spiral Tap | Point Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point Tap | Spiral Tap | Rolled Tap | Tapping Cutter | Rolled Tap | Spiral Tap | Spiral Tap | Point Tap | Point Tap | Tapping Cutter | Tapping Cutter | Tapping Cutter | Rolled Tap | Rolled Tap | Spiral Tap | Rolled Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Tapping Cutter | Point Tap |
Bore Model | For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Blind Holes | For Blind Holes | - | - | For Blind Holes | For Blind Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes |
Coating Presence | Included | Included | Included | Included | Included | None | Included | Included | Included | Included | None | Included | Included | Included | None | Included | None | None | None | None | Included | None | Included | Included | Included | None | None | Included | Included | Included | Included | Included | Included | None | Included | None | Included | Included | Included | Included | None | Included | None | Included | Included |
Coating Type | TiN | For High Hardness (Silicone-Based) / Others | Others | TiCN | Others | - | TiN | TiN | TiCN | TiN | Non-Coated | TiN | CrN | TiAlN | - | TiN | - | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | TiCN | TiAlN | TiCN | - | - | Others | TiCN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | TiN | - | TiN | - | TiN / CrN | TiN | TiN | Others | Non-Coated | CrN | Non-Coated | TiAlN | TiN |
Overall Length (L)(mm) | 30 ~ 105 | 40 | 34 ~ 250 | 30 ~ 220 | 34 ~ 120 | 46 ~ 105 | 80 ~ 210 | 80 ~ 150 | 30 ~ 82 | 46 ~ 150 | 40 ~ 120 | 100 ~ 200 | 46 | 58 ~ 73 | 40 ~ 82 | 46 ~ 150 | 46 ~ 75 | 40 ~ 120 | 44 ~ 75 | 44 ~ 130 | 60 ~ 75 | 55 ~ 80 | 60 ~ 200 | 45 | 40 ~ 105 | 42 ~ 135 | 46 ~ 120 | 80 ~ 200 | 46 ~ 120 | 57 ~ 115 | 39 ~ 105 | 48 ~ 74 | 46 ~ 75 | 34 ~ 75 | 70 ~ 95 | 70 ~ 150 | 40 ~ 120 | 34 ~ 95 | 100 ~ 150 | 46 ~ 95 | 150 | 75 | 46 | 60 ~ 120 | 34 ~ 175 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy