(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Deep Hole Machining, EX-DH-POT
OSG
Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Through Hole Use, EX-SS-POT
OSG
Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Interrupted Threads, Long Shank, EX-LT-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Interrupted Threads, Short Screw, EX-S-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Interrupted Threads, Short Screw, Long Shank, EX-LT-S-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, LT-SUS-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Spiral Fluted, for Stainless Steels, SUS-SFT-TPT
OSG
[Specifications]
· Shape: Pipe tap
· Screw type: pipe taper
· Coating: Non-Coated
· Work Material: Stainless Steel
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Spiral Fluted, for Stainless Steels, Short Screw, SUS-SFT-S-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, for Stainless Steels, Short Screw, EX-SUS-S-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - for Stainless Steels, Long Shank, Short Screw, LT-SUS-S-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Blind Hole Machining, SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, LT-SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, Short Screw, LT-SFT-S-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Spiral Fluted, Blind Hole Machining, Short Screw, SFT-S-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Carbide, Short Screw, OT-S-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - New Roll Tap, Oxidized, NRT-SPT
OSG
Convenient for lateral tapping of pipe threads and processing deep holes.
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - High Speed Steel, Oxidized, H-SPT
OSG
Used to process female threads for parallel pipe threads.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Synchro Tap for Aluminum, HS-AL-NRT
OSG
Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, Grooveless, HRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
Days to Ship: | 8 Days or more |
---|
Forming Taps - for Steels, Oxidized, Grooveless, NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
Days to Ship: | 8 Days or more |
---|
Forming Taps - Carbide, New Roll Tap, OT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: | 8 Days or more |
---|
Forming Taps - Carbide, New Roll Tap, Long Shank, OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: | 8 Days or more |
---|
Forming Taps - for Non-Ferrous Alloys, Grooveless, B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, SPT-NPSF
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Days to Ship: | 8 Days or more |
---|
Tapered Tap Series for American Piping General Use (NPT) TPT
OSG
Used to process tapered female pipe threads. Mainly used for connecting pipes
Days to Ship: | 8 Days or more |
---|
Threading Tools - High Speed Steel, EX-S-MCT
OSG
Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-S-PS
OSG
[Specifications]
· Shape: Die
· Screw type: pipe parallel
· Coating: Non-Coated
· Tool material: Alloy HSS
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-S-NPS
OSG
[Specifications]
· Shape: Die
· Screw type: pipe parallel
· Coating: Non-Coated
· Tool material: Alloy HSS
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-H
OSG
[Specifications]
· Shape: Die
· Screw type: pipe parallel
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Threading Round Die Series, Threading Round Die for Stainless Steel, Solid Type, SUS-SD (HSS)
OSG
[Specifications]
· Shape: Die
· Screw type: metric
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-PT
OSG
[Specifications]
· Shape: Die
· Screw type: pipe taper
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-NPT
OSG
[Specifications]
· Shape: Die
· Screw type: pipe taper
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-S-PF
OSG
[Specifications]
· Shape: Die
· Screw type: pipe parallel
· Coating: Non-Coated
· Tool material: Alloy HSS
Days to Ship: | 8 Days or more |
---|
Threading Tools - High Speed Steel, Tire Valve Screw
SKC
•Thread Size (Nominal) : CTV5, CTV8, TV10, TV5, TV8
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Point Tap
•Bore Model : For Blind Holes
For complete product overview and details on Tire Valve Screw, see the sections below:
Days to Ship: | 8 Days or more |
---|
Threading Tools - Jet/Spiral Drill Set, Cobalt High Speed Steel, COJSD【21 Pieces Per Package】
ISHIHASHI
•Thread Types : Meter
•Tool Material Type : Cobalt High-Speed Steel
•Tap Model : Tapping Related Tools
For complete product overview and details on Cobalt Jet/Spiral Type/Drill Set, see the sections below:
Days to Ship: | 8 Days or more |
---|
Threading Tools - Spiral Drill Set, Cobalt High Speed Steel, COSSD【21 Pieces Per Package】
ISHIHASHI
Set of Cobalt Spiral Taps and Cobalt Masamune Drills in Steel Case
Days to Ship: | 8 Days or more |
---|
Threading Tools - Drill Set, for Electric Construction, ETD【26 Pieces Per Package】
ISHIHASHI
•Tap Model: Tapping Related Tools
•Coating Type: Non-Coated
•Sale Operation: Set
•Drill external diameter (mm): 3.4: 10 pcs, 4.3: 2 pcs, 5.2: 2 pcs
•Tap Designation: M4X0.7: 8 pcs/M5X0.8: 2 pcs/M6X1.0: 2 pcs
Days to Ship: | 8 Days or more |
---|
Threading Tools - Drill Set, Hand Tap, HTD【21 Pieces Per Package】
ISHIHASHI
•Tap Model: Tapping Related Tools
•Coating Type: Non-Coated
•Sale Operation: Set
•Drill external diameter (mm): 2.5/3.3/4.2/5.0/6.8/8.5/10.3 (1 piece each)
•Tap Designation: M3/M4/M5/M6/M8/M10/M12
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SKC | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT | Spiral Point Taps - High Speed Steel, Deep Hole Machining, EX-DH-POT | Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT | Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT | Spiral Point Taps - High Speed Steel, Through Hole Use, EX-SS-POT | Taper Pipe Taps - Interrupted Threads, Long Shank, EX-LT-IRT | Taper Pipe Taps - Interrupted Threads, Short Screw, EX-S-IRT | Taper Pipe Taps - Interrupted Threads, Short Screw, Long Shank, EX-LT-S-IRT | Taper Pipe Taps - Spiral Fluted, for Stainless Steels, SUS-SFT-TPT | Taper Pipe Taps - Spiral Fluted, for Stainless Steels, Short Screw, SUS-SFT-S-TPT | Taper Pipe Taps - Carbide, for Stainless Steels, Short Screw, EX-SUS-S-TPT | Taper Pipe Taps - for Stainless Steels, Long Shank, Short Screw, LT-SUS-S-TPT | Taper Pipe Taps - High Speed Steel, Blind Hole Machining, SFT-TPT | Taper Pipe Taps - High Speed Steel, Long Shank, Short Screw, LT-SFT-S-TPT | Taper Pipe Taps - Spiral Fluted, Blind Hole Machining, Short Screw, SFT-S-TPT | Taper Pipe Taps - Carbide, Through Hole/Blind Hole Use, OT-TPT | Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT | Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT | Forming Taps - High Speed Synchro Tap for Aluminum, HS-AL-NRT | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, SPT-NPSF | Tapered Tap Series for American Piping General Use (NPT) TPT | Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-S-PS | Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-S-NPS | Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-H | Threading Round Die Series, Threading Round Die for Stainless Steel, Solid Type, SUS-SD (HSS) | Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-PT | Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-NPT | Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-S-PF | Threading Tools - Jet/Spiral Drill Set, Cobalt High Speed Steel, COJSD【21 Pieces Per Package】 | Threading Tools - Spiral Drill Set, Cobalt High Speed Steel, COSSD【21 Pieces Per Package】 | Threading Tools - Drill Set, for Electric Construction, ETD【26 Pieces Per Package】 | Threading Tools - Drill Set, Hand Tap, HTD【21 Pieces Per Package】 | |||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Parallel | Pipe Parallel | Meter | Meter | Meter | Meter | Meter | Meter | Pipe Parallel | Pipe Taper | Meter | Pipe Parallel | Pipe Parallel | Pipe Parallel | Meter | Pipe Taper | Pipe Taper | Pipe Parallel | - | Meter | Meter | - | - |
Thread Size (Nominal) | 1/2UN ~ M36 | M3 ~ M20 | M2.5 ~ M10 | M6 | M8 ~ M12 | M2 ~ M12 | R1 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | R1/2 ~ R3/8 | G1/2 ~ G3/8 | R1 ~ R3/8 | R1 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | PF3/8 | G1/2 | M4 | M1.4 ~ M3.5 | M1.2 ~ M10 | M3 ~ M12 | M3 ~ M12 | M4 ~ M6 | NPS1/16 | NPT1/8 | M8 | R1 ~ R7/8 | NPS1 ~ NPS3/8 | G1/2 ~ G3/8 | M4 | R1 ~ R3/8 | NPT1 ~ NPT3/8 | G1 ~ G7/8 | TV8 | - | - | - | - |
Pitch (P), Thread Count(mm) | 0.3 ~ 44 | 0.5 ~ 2 | 0.45 ~ 1.25 | 1 | 1.25 ~ 1.75 | 0.4 ~ 1.75 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 14 ~ 28 | 14 ~ 28 | 11 ~ 28 | 11 ~ 28 | 14 ~ 28 | 11 ~ 28 | 14 ~ 28 | 14 ~ 28 | 11 ~ 28 | 14 ~ 28 | 14 ~ 28 | 11 ~ 19 | 11 ~ 28 | 19 | 14 | 0.7 | 0.3 ~ 0.6 | 0.25 ~ 1.5 | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 0.7 ~ 1 | 27 | 27 | 1.25 | 11 ~ 28 | 11.5 ~ 27 | 14 ~ 28 | 0.7 | 11 ~ 28 | 11.5 ~ 27 | 11 ~ 28 | 32 | - | - | - | - |
Number of Chamfered Threads (Lcf) | 5P | 5P | 4P | 5P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 4P | 2P | 2.5P | 2P ~ 4P | 2P | 2P | 2.5P ~ 4P | 4P | 2.5P | 3P | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Material Type | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Alloy High-Speed Steel | Alloy High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Alloy High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | - | - |
Work Material | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[◎] / Cast Iron (FC)[○] | Stainless Steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] | Stainless Steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Stainless Steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - | - | - | - | - | - | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | - | - | - | - |
Tap Model | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Spiral Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Pipe Tap | Pipe Tap | Tapping Related Tools | Die | Die | Die | Die | Die | Die | Die | Point Tap | Tapping Related Tools | Tapping Related Tools | Tapping Related Tools | Tapping Related Tools |
Bore Model | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | - | - | - | - | - | - | For Blind Holes | - | - | - | - |
Coating Presence | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Coating Type | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
Overall Length (L)(mm) | 34 ~ 155 | 100 ~ 150 | 44 ~ 75 | 62 | 150 | 40 ~ 82 | 120 ~ 150 | 55 ~ 95 | 120 ~ 150 | 100 ~ 150 | 55 ~ 80 | 55 ~ 95 | 55 ~ 95 | 100 ~ 150 | 55 ~ 95 | 100 ~ 150 | 100 ~ 150 | 55 ~ 95 | 55 ~ 80 | 55 ~ 80 | 62 ~ 95 | 120 ~ 150 | 65 | 80 | 52 | 34 ~ 48 | 32 ~ 75 | 46 ~ 82 | 100 ~ 150 | 52 ~ 62 | 55 | 55 | 70 | - | - | - | - | - | - | - | 70 | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy