(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Hand Taps - Through Hole/Blind Hole Use, HT
OSG
An HSS hand tap.
For complete product overview and details on Hand Taps - Through Hole/Blind Hole Use, HT see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Round Threading Dies - High Speed Steel, Solid Type, Metric
YAMAWA
Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, IT-TF-T
TANOI
•Tap Model: Rolled Tap
•Coating Type: TiCN
•Thread Type: Meter
•Tool Material Type: High-Speed Steel
•Coating Presence: Included
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, Long Shank, LS-SL-TF
TANOI
•Thread Types : Meter
•Thread Size (Nominal) : M11, M12, M14, M16, M18, M20, M3, M3.5, M4, M5, M6, M7, M8, M9
•Number of Chamfered Threads (Lcf) : 1P, 2P
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)
•Tap Model : Rolled Tap
For complete product overview and details on Long Seamless TAFLET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, TiN Coated, 1013
GUHRING
[Features]
· JIS standard compliant tap for blind holes.
· Supports a wide range of work materials from general steel to stainless steel.
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - High Speed Steel, Oxidized, HS-D
YAMAWA
Solid die for difficult-to-cut materials, such as stainless steel, etc.
[Features]
· Adopts high-speed tool steel (HSS).
· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
· Stable male threading can be performed.
· Solid type with minimal variation even under harsh cutting condition specifications.
[Applications]
· Optimal for machining stainless steel and other difficult-to-cut materials.
Days to Ship: | 8 Days or more |
---|
Forming Taps - for Steels, Oxidized, Grooveless, NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, Carbon Coated, IT-TF-C
TANOI
•Tap Model: Rolled Tap
•Coating Type: Others
•Thread Type: Meter
•Tool Material Type: High-Speed Steel
•Coating Presence: Included
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, SL-TF
TANOI
•Thread Types : Meter
•Thread Size (Nominal) : M10, M11, M12, M14, M16, M18, M2, M2.3, M2.5, M2.6, M20, M3, M3.5, M4, M5, M6, M7, M8, M9
•Number of Chamfered Threads (Lcf) : 1P, 2P
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)
•Tap Model : Rolled Tap
For complete product overview and details on Seamless TAFLET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Threading Tools - High Speed Steel, Tire Valve Screw
SKC
•Thread Size (Nominal) : CTV5, CTV8, TV10, TV5, TV8
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Point Tap
•Bore Model : For Blind Holes
For complete product overview and details on Tire Valve Screw, see the sections below:
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Deep Hole Machining, SU-S-SP
YAMAWA
[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, Through Hole/Blind Hole Use
YAMAWA
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)
YAMAWA
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Deep Hole Machining, Oxidized, S-SP
YAMAWA
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Deep Hole Machining, S-PO
YAMAWA
A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - TiCN Coated, Through Hole Use, SGPO
Nachi-Fujikoshi
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, Oxidized, TFST
Nachi-Fujikoshi
A rise up type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips.
· Less inconsistent screw precision.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.
Days to Ship: | 8 Days or more |
---|
Forming Taps - Blind Hole Machining, Long Shank, TFLL
Nachi-Fujikoshi
A rise up type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
[Applications]
· Suitable for rolled threading of non-ferrous metals such as aluminum.
· For standard dimensions, it is used when the protrusion length is insufficient.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TFL
Nachi-Fujikoshi
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips and provides stable screw accuracy.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Ideal for rolled threading of non-ferrous metals such as aluminum.
Days to Ship: | 8 Days or more |
---|
Forming Taps - Blind Hole Machining, Long Shank, TFSTL
Nachi-Fujikoshi
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
[Applications]
· Ideal for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.
· For standard dimensions, it is convenient when the protrusion length is insufficient.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TFS
Nachi-Fujikoshi
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips and provides stable screw accuracy.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Ideal for rolled threading of non-ferrous metals such as aluminum.
Days to Ship: | 8 Days or more |
---|
Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, Straight Fluted, HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
Days to Ship: | 8 Days or more |
---|
Hand Taps - High Speed Steel, Long Shank, HL-LT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Blind Hole Machining, SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, LT-SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Long Shank, Short Screw, LT-SFT-S-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - Spiral Fluted, Blind Hole Machining, Short Screw, SFT-S-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - New Roll Tap, Oxidized, NRT-SPT
OSG
Convenient for lateral tapping of pipe threads and processing deep holes.
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - High Speed Steel, Oxidized, H-SPT
OSG
Used to process female threads for parallel pipe threads.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, Grooveless, HRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
Days to Ship: | 8 Days or more |
---|
Forming Taps - for Non-Ferrous Alloys, Grooveless, B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.
Days to Ship: | 8 Days or more |
---|
Forming Taps - for Non-Ferrous Alloys, Grooveless, B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, SPT-NPSF
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Days to Ship: | 8 Days or more |
---|
Tapered Tap Series for American Piping General Use (NPT) TPT
OSG
Used to process tapered female pipe threads. Mainly used for connecting pipes
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-H
OSG
[Specifications]
· Shape: Die
· Screw type: pipe parallel
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Threading Round Die Series, Threading Round Die for Stainless Steel, Solid Type, SUS-SD (HSS)
OSG
[Specifications]
· Shape: Die
· Screw type: metric
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-PT
OSG
[Specifications]
· Shape: Die
· Screw type: pipe taper
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-NPT
OSG
[Specifications]
· Shape: Die
· Screw type: pipe taper
· Coating: Non-Coated
· Tool material: HSS
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - High Speed Steel, CTG Conduit Tap, Thick
SKC
•Thread Types : Others
•Thread Size (Nominal) : CTG-16, CTG-22, CTG-28, CTG-36, CTG-42, CTG-54
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
For complete product overview and details on C.T.G Thick Conduit Pipe Screw Tap, see the sections below:
Days to Ship: | 8 Days or more |
---|
Parallel Pipe Taps - High Speed Steel, PG Conduit Tap
SKC
•Thread Types : Others
•Thread Size (Nominal) : PG11, PG13.5, PG16, PG21, PG29, PG36, PG42, PG7, PG9
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
For complete product overview and details on Pg Conduit Thread Tap (German Standard), see the sections below:
Days to Ship: | 8 Days or more |
---|
Threading Tools - Drill Set, Spiral Tap, High Speed Steel【21 Pieces Per Package】
ISHIHASHI
•Tap Model: Tapping Related Tools
•Coating Type: Non-Coated
•Tool Material Type: High-Speed Steel
•Sale Operation: Set
•Drill external diameter (mm): 2.5/3.3/4.2/5.0/6.8/8.5/10.3 (1 piece each)
Days to Ship: | 8 Days or more |
---|
Threading Tools - Jet/Spiral Drill Set, High Speed Steel【21 Pieces Per Package】
ISHIHASHI
•Tap Model: Tapping Related Tools
•Coating Type: Non-Coated
•Tool Material Type: High-Speed Steel
•Sale Operation: Set
•Drill external diameter (mm): 2.5/3.3/4.2/5.0/6.8/8.5/10.3 (1 piece each)
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Through Hole Use, TiN Coated, 1015
GUHRING
[Features]
· JIS standard compliant tap for through holes.
· Supports a wide range of work materials from general steel to stainless steel.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
Brand | OSG | YAMAWA | OSG | TANOI | TANOI | GUHRING | YAMAWA | OSG | TANOI | TANOI | SKC | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SKC | SKC | ISHIHASHI | ISHIHASHI | GUHRING |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT | Forming Taps - High Speed Steel, TiCN Coated, Long Shank, LS-SL-TF | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, TiN Coated, 1013 | Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP) | Spiral Point Taps - High Speed Steel, Deep Hole Machining, S-PO | Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT | Taper Pipe Taps - High Speed Steel, Blind Hole Machining, SFT-TPT | Taper Pipe Taps - High Speed Steel, Long Shank, Short Screw, LT-SFT-S-TPT | Taper Pipe Taps - Spiral Fluted, Blind Hole Machining, Short Screw, SFT-S-TPT | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, SPT-NPSF | Tapered Tap Series for American Piping General Use (NPT) TPT | Round Threading Dies - Alloy High Speed Steel, Parallel Thread, SPD-H | Threading Round Die Series, Threading Round Die for Stainless Steel, Solid Type, SUS-SD (HSS) | Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-PT | Round Threading Dies - High Speed Steel, Taper Thread, TPD-H-NPT | Parallel Pipe Taps - High Speed Steel, CTG Conduit Tap, Thick | Threading Tools - Drill Set, Spiral Tap, High Speed Steel【21 Pieces Per Package】 | Threading Tools - Jet/Spiral Drill Set, High Speed Steel【21 Pieces Per Package】 | |||||||||||||||||||||||||||
Days to Ship |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter / Unified | Meter | Pipe Taper | Meter | Meter | Meter | Meter | Meter | Meter | Meter | - | Meter | Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Unified | Unified | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Pipe Parallel | Pipe Parallel | Meter | Meter | Meter | Pipe Parallel | Pipe Taper | Pipe Parallel | Meter | Pipe Taper | Pipe Taper | Others | Others | - | - | Meter |
Thread Size (Nominal) | 1UNS ~ M38 | M1 ~ M30 | R1"1/4 ~ R5/8 | M1 ~ M10 | M4 ~ M6 | M2 ~ M20 | M1 ~ M10 | M1.2 ~ M10 | M1 ~ M10 | M2 ~ M20 | TV8 | M3 ~ M20 | No.10-24UNC ~ 3/4-16UNF | M2 ~ M6 | M2 ~ M30 | M2 ~ M30 | M3 ~ M24 | M1.4 ~ M10 | M3 ~ M10 | M1.4 ~ M10 | M3 ~ M10 | M1.4 ~ M6 | M8 | No8UN ~ No10UN | No6UN | R1 ~ R3/8 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | PF3/8 | G1/2 | M1.4 ~ M3.5 | M4 ~ M6 | M8 ~ M20 | NPS1/16 | NPT1/8 | G1/2 ~ G3/8 | M4 | R1 ~ R3/8 | NPT1 ~ NPT3/8 | CTG-54 ~ CTG-16 | PG7 ~ PG42 | - | - | M2 ~ M20 |
Pitch (P), Thread Count(mm) | 0.25 ~ 40 | 0.25 ~ 3.5 | 11 ~ 14 | 0.2 ~ 1.5 | 0.7 ~ 1 | 0.4 ~ 2.5 | 0.25 ~ 1.5 | 0.25 ~ 1.5 | 0.2 ~ 1.5 | 0.4 ~ 2.5 | 32 | 0.5 ~ 2.5 | - | 0.4 ~ 1 | 0.4 ~ 3.5 | 0.4 ~ 3.5 | 0.5 ~ 3 | 0.3 ~ 1.5 | 0.5 ~ 1.5 | 0.3 ~ 1.5 | 0.5 ~ 1.5 | 0.3 ~ 1 | 1.25 | 24 ~ 32 | 32 | 11 ~ 28 | 14 ~ 28 | 14 ~ 28 | 11 ~ 28 | 19 | 14 | 0.3 ~ 0.6 | 0.7 ~ 1 | 1.25 ~ 1.5 | 27 | 27 | 14 ~ 28 | 0.7 | 11 ~ 28 | 11.5 ~ 27 | 11 ~ 14 | 16 ~ 20 | - | - | 0.4 ~ 2.5 |
Number of Chamfered Threads (Lcf) | 1.5P ~ 9P | - | 2.5P | 1P ~ 4P | 1P ~ 2P | - | - | 2P ~ 4P | 1P ~ 4P | 1P ~ 2P | - | 2.5P | 1.5P ~ 5P | 2.5P | 2.5P | 5P | 5 | 2P ~ 4P | 2P | 2P ~ 4P | 2P | 2P ~ 4P | 2P | 1.5P ~ 5P | 1.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 4P | 2.5P | 2.5P ~ 4P | 4P | 4P | 2.5P | - | - | - | - | - | - | - | - | - |
Tool Material Type | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel |
Work Material | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | - | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Cast Steel (SC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] | Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] | Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] | Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - | - | - | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | - | - | - |
Tap Model | Hand Tap | Die | Pipe Tap | Rolled Tap | Rolled Tap | Spiral Tap | Die | Rolled Tap | Rolled Tap | Rolled Tap | Point Tap | Spiral Tap | Hand Tap | Spiral Tap | Spiral Tap | Point Tap | Point Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Hand Tap | Hand Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Pipe Tap | Rolled Tap | Rolled Tap | Rolled Tap | Pipe Tap | Pipe Tap | Die | Die | Die | Die | Pipe Tap | Pipe Tap | Tapping Related Tools | Tapping Related Tools | Point Tap |
Bore Model | For Through Holes / For Blind Holes | - | For Through Holes / For Blind Holes | - | - | For Blind Holes | - | For Through Holes / For Blind Holes | - | - | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | - | - | - | - | - | - | - | For Through Holes |
Coating Presence | None | None | None | Included | Included | Included | None | None | Included | Included | None | None | None | None | None | None | Included | None | None | None | None | None | Included | None | None | None | None | None | None | None | None | None | None | Included | None | None | None | None | None | None | - | - | None | None | Included |
Coating Type | Non-Coated | - | Non-Coated | TiCN | TiCN | TiN | - | Non-Coated | Others | TiCN | Non-Coated | - | - | - | - | - | TiCN | - | - | - | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | Non-Coated | TiN |
Overall Length (L)(mm) | 30 ~ 165 | - | 82 ~ 105 | 30 ~ 75 | 70 ~ 120 | 40 ~ 105 | - | 32 ~ 75 | 30 ~ 75 | 40 ~ 105 | 70 | 46 ~ 105 | 60 ~ 105 | 42 ~ 62 | 42 ~ 135 | 42 ~ 135 | 46 ~ 120 | 34 ~ 75 | 70 ~ 150 | 34 ~ 75 | 70 ~ 150 | 34 ~ 62 | 150 | 60 ~ 62 | 100 | 55 ~ 95 | 100 ~ 150 | 100 ~ 150 | 55 ~ 95 | 65 | 80 | 34 ~ 48 | 52 ~ 62 | 70 ~ 105 | 55 | 55 | - | - | - | - | 80 ~ 120 | 85 ~ 135 | - | - | 40 ~ 105 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy