(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 2/22 to 5:00 p.m. (CST) 2/23/2025. We apologize for the inconvenience.

Screw Hole Related Tools(Thread Size (Nominal):M2.2)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machinin ...Readmore

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.  ▲ Close

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
  • 17 Days or Less
  1. 1
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)
  • On Sale Till 07/03/2025

Hand Taps - Through Hole/Blind Hole Use, HT

    Spiral Flute Taps - Model A Series, V Coated, A-SFT

      Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

        Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

          Forming Taps - High Speed Steel, TiCN Coated, IT-TF-T

            Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

              Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

                Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                  Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                  Brand

                  OSG

                  OSG

                  MISUMI

                  MISUMI

                  TANOI

                  OSG

                  OSG

                  OSG

                  OSG

                  Product Series

                  Hand Taps - Through Hole/Blind Hole Use, HT

                  Spiral Flute Taps - Model A Series, V Coated, A-SFT

                  Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

                  Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

                  Forming Taps - High Speed Steel, TiCN Coated, IT-TF-T

                  Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

                  Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

                  Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                  Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                  Days to Ship Same day

                  Show Stock Products

                  8 Days or more 10 Days or more 10 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more
                  Thread TypesMeterMeterMeterMeterMeterMeterMeterMeterMeter
                  Thread Size (Nominal)M2.2M2.2M2.2M2.2M2.2M2.2M2.2M2.2M2.2
                  Pitch (P), Thread Count(mm)0.450.25 ~ 0.450.450.450.25 ~ 0.450.25 ~ 0.450.25 ~ 0.450.25 ~ 0.450.25 ~ 0.45
                  Number of Chamfered Threads (Lcf)5P2.5P--1P ~ 4P5P-5P2.5P
                  Tool Material TypeHigh-Speed SteelPowdered High-Speed SteelCarbideCarbideHigh-Speed SteelPowdered High-Speed SteelAlloy High-Speed SteelPowdered High-Speed SteelPowdered High-Speed Steel
                  Work MaterialMedium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○]-Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]
                  Tap ModelHand TapSpiral TapTapping CutterTapping CutterRolled TapPoint TapDiePoint TapSpiral Tap
                  Bore ModelFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind Holes-For Through Holes-For Through HolesFor Blind Holes
                  Coating PresenceNoneIncludedIncludedIncludedIncludedIncludedNoneIncludedIncluded
                  Coating TypeNon-CoatedOthersTiAlNTiAlNTiCNOthersNon-CoatedOthersOthers
                  Overall Length (L)(mm)424258584242-8080

                  Loading...

                  1. 1

                  Related Categories to Screw Hole Related Tools