(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Hand Taps - Through Hole/Blind Hole Use, HT
OSG
An HSS hand tap.
For complete product overview and details on Hand Taps - Through Hole/Blind Hole Use, HT see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Hand Taps - Carbide, Through Hole/Blind Hole Use, OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, V Coated, VP-SFT
OSG
Ideal for machining alloy steel and pre-hardened steel of 35 to 42 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Model A Series, V Coated, A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
Days to Ship: | Same day |
---|
Show Stock Products
Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - High Speed Steel, Solid Type, Metric
YAMAWA
Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML
MISUMI
Threading cutters for stable high-speed processing are available at a special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
From general steel to difficult-to-cut materials, this coated tap allows high-speed, high-efficiency threading of blind holes.
[Features]
· A tap that adopts powdered high-speed steel with excellent wear resistance and has a TiN coated surface.
· It has a stable life using high-speed, high-precision threading.
· Special relief prevents over-cutting due to excessive advancement of the tap.
[Applications]
· High-speed, high-efficiency threading of through holes on materials ranging from general steel to difficult-to-cut materials.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, IT-TF-T
TANOI
•Tap Model: Rolled Tap
•Coating Type: TiCN
•Thread Type: Meter
•Tool Material Type: High-Speed Steel
•Coating Presence: Included
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Copper, CrN Coated, CU-POT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
Days to Ship: | 8 Days or more |
---|
Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Days to Ship: | 8 Days or more |
---|
Forming Taps - Carbide, New Roll Tap, Long Shank, OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, Long Shank, LS-SL-TF
TANOI
•Thread Types : Meter
•Thread Size (Nominal) : M11, M12, M14, M16, M18, M20, M3, M3.5, M4, M5, M6, M7, M8, M9
•Number of Chamfered Threads (Lcf) : 1P, 2P
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)
•Tap Model : Rolled Tap
For complete product overview and details on Long Seamless TAFLET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Threading Tools - Jet/Spiral Drill Set, Cobalt High Speed Steel, COJSD【21 Pieces Per Package】
ISHIHASHI
•Thread Types : Meter
•Tool Material Type : Cobalt High-Speed Steel
•Tap Model : Tapping Related Tools
For complete product overview and details on Cobalt Jet/Spiral Type/Drill Set, see the sections below:
Days to Ship: | 8 Days or more |
---|
Threading Tools - Spiral Drill Set, Cobalt High Speed Steel, COSSD【21 Pieces Per Package】
ISHIHASHI
Set of Cobalt Spiral Taps and Cobalt Masamune Drills in Steel Case
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, TiN Coated, 1013
GUHRING
[Features]
· JIS standard compliant tap for blind holes.
· Supports a wide range of work materials from general steel to stainless steel.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - Cemented Carbide, TiAlN Coated, EH-CT
YAMAWA
Ideal for tapping of high-hardness steel of 45 to 55 HRC, such as steel for hot-rolled dies (SKS3, SKD11, etc.). We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Days to Ship: | 8 Days or more |
---|
Round Threading Dies - High Speed Steel, Oxidized, HS-D
YAMAWA
Solid die for difficult-to-cut materials, such as stainless steel, etc.
[Features]
· Adopts high-speed tool steel (HSS).
· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
· Stable male threading can be performed.
· Solid type with minimal variation even under harsh cutting condition specifications.
[Applications]
· Optimal for machining stainless steel and other difficult-to-cut materials.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Spiral Claw 300, TiCN Coated, EX0DMJ
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· TiCN coating with high wear resistance provides less wear and longer service life.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials: Stainless steel, steel.
[Material]
· High-Speed Steel (HSS-E)
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, MT-SPFT
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Days to Ship: | Same day or more |
---|
Show Stock Products
Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.
Days to Ship: | 8 Days or more |
---|
G Spiral Tap for Deep Holes in Stainless Steel GSPS
Nachi-Fujikoshi
Coating tap suitable for stainless steel and places prone to chip clogging.
[Features]
· Adopts powdered high-speed steel with excellent wear resistance.
· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.
· A thick neck, which eliminates chipping and wrapping of chips, has been adopted.
[Applications]
· Coating tap suitable for stainless steel and places prone to chip clogging.
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, for Hardened Steels, WH55-OT
OSG
Ideal for tapping hardened steel up to 55 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT
OSG
Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.
Days to Ship: | 8 Days or more |
---|
Threading Tools - Spatter Removal Hand Tap, SR-HT
OSG
Ideal for removing welding spatter and chips from the interior of female screws
Days to Ship: | 8 Days or more |
---|
Hand Taps - Carbide, for Die Castings, OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Days to Ship: | 8 Days or more |
---|
Thread Mills - Carbide with Oil Hole, TiAlN Coated, DR-PNAC, Planet Cutter Series
OSG
A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Forming Taps - VP New Roll, Grooveless, VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: | 8 Days or more |
---|
Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: | 8 Days or more |
---|
Forming Taps - X Performer, Grooveless, S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.
Days to Ship: | 8 Days or more |
---|
Forming Taps - for Steels, Oxidized, Grooveless, NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, Carbon Coated, IT-TF-C
TANOI
•Tap Model: Rolled Tap
•Coating Type: Others
•Thread Type: Meter
•Tool Material Type: High-Speed Steel
•Coating Presence: Included
Days to Ship: | 8 Days or more |
---|
Forming Taps - High Speed Steel, TiCN Coated, SL-TF
TANOI
•Thread Types : Meter
•Thread Size (Nominal) : M10, M11, M12, M14, M16, M18, M2, M2.3, M2.5, M2.6, M20, M3, M3.5, M4, M5, M6, M7, M8, M9
•Number of Chamfered Threads (Lcf) : 1P, 2P
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)
•Tap Model : Rolled Tap
For complete product overview and details on Seamless TAFLET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, SX Type
SKC
•Tap Model: Spiral Tap
•Material: SKH
Days to Ship: | 9 Days or more |
---|
Forming Taps - Torqueless Thread Forming, Short Chamfer, SC-TL-RZ
YAMAWA
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Deep Hole Machining, SU-S-SP
YAMAWA
[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)
YAMAWA
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA | MISUMI | Nachi-Fujikoshi | OSG | TANOI | OSG | MISUMI | OSG | OSG | OSG | TANOI | ISHIHASHI | ISHIHASHI | GUHRING | YAMAWA | YAMAWA | SANDVIK | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | TANOI | TANOI | SKC | YAMAWA | YAMAWA | YAMAWA |
Product Series | Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT | Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC | Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series | Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series | Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】 | Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT | Forming Taps - High Speed Steel, TiCN Coated, Long Shank, LS-SL-TF | Threading Tools - Jet/Spiral Drill Set, Cobalt High Speed Steel, COJSD【21 Pieces Per Package】 | Threading Tools - Spiral Drill Set, Cobalt High Speed Steel, COSSD【21 Pieces Per Package】 | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, TiN Coated, 1013 | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT | Thread Mills - Carbide with Oil Hole, TiAlN Coated, DR-PNAC, Planet Cutter Series | Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT | Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT | Forming Taps - Torqueless Thread Forming, Short Chamfer, SC-TL-RZ | Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP) | |||||||||||||||||||||||||||||
Days to Ship |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
Thread Size (Nominal) | M1 ~ M38 | M1.4 ~ M20 | M3 ~ M12 | M1.4 ~ M56 | M1.6 ~ M20 | - | M2 ~ M24 | M1 ~ M30 | M3 ~ M20 | M8 | M3 ~ M16 | M1 ~ M10 | M1.4 ~ M24 | M3 ~ M10 | M3 | M3 ~ M12 | M3 ~ M12 | M4 ~ M6 | - | - | M2 ~ M20 | M3 ~ M12 | M1 ~ M10 | M3 ~ M24 | M2 ~ M24 | M2 ~ M24 | M8 ~ M16 | M3 ~ M12 | M2.6 ~ M27 | M3 ~ M12 | M5 ~ M12 | M3 ~ M12 | M6 ~ M12 | M3 ~ M20 | M6 | M1 ~ M12 | M1 ~ M12 | M1 ~ M45 | M1.2 ~ M10 | M1 ~ M10 | M2 ~ M20 | M3 ~ M48 | M1 ~ M6 | M3 ~ M20 | M2 ~ M6 |
Pitch (P), Thread Count(mm) | 0.25 ~ 3.5 | 0.3 ~ 2.5 | 0.5 ~ 1.75 | 0.25 ~ 5.5 | 0.35 ~ 2.5 | 1 ~ 3.5 | 0.25 ~ 3 | 0.25 ~ 3.5 | 0.5 ~ 2.5 | 1.25 | 0.5 ~ 2 | 0.2 ~ 1.5 | 0.25 ~ 3 | 0.5 ~ 1.5 | 0.5 | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 0.7 ~ 1 | - | - | 0.4 ~ 2.5 | 0.5 ~ 1.75 | 0.25 ~ 1.5 | 0.5 ~ 3 | 0.4 ~ 3 | 0.4 ~ 3 | 1.25 ~ 2 | 0.5 ~ 1.75 | 0.45 ~ 3 | 0.5 ~ 1.75 | 0.8 ~ 1.25 | 0.5 ~ 1.75 | 1 ~ 1.75 | 0.5 ~ 2 | 1 | 0.25 ~ 1.75 | 0.25 ~ 1.75 | 0.2 ~ 4.5 | 0.25 ~ 1.5 | 0.2 ~ 1.5 | 0.4 ~ 2.5 | 0.5 ~ 5 | 0.2 ~ 1 | 0.5 ~ 2.5 | 0.4 ~ 1 |
Number of Chamfered Threads (Lcf) | 1.5P ~ 9P | 1.5P ~ 3P | 2.5P | 1.5P ~ 2.5P | 3P | - | 5P | - | - | 2.5P | 2.5P | 1P ~ 4P | 5P | 5 P | 5P | 2P ~ 4P | 2P | 1P ~ 2P | - | - | - | 5P | - | 2P | 2.5 P | 5 P | 2.5P | 2.5P ~ 5P | 2.5P | 1.5P ~ 2.5P | 5P | 1.5P | - | 5P | 5P | 2P ~ 4P | 2P ~ 4P | 2P ~ 4P | 2P ~ 4P | 1P ~ 4P | 1P ~ 2P | - | 1P | 2.5P | 2.5P |
Tool Material Type | High-Speed Steel | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel / Vanadium High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Carbide | Alloy High-Speed Steel | Vanadium High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | Carbide | High-Speed Steel | - | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Alloy High-Speed Steel | Carbide | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel / Vanadium High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | - | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel |
Work Material | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | - | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Cast Aluminum Alloy (AC, ADC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Stainless Steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | - | - | - | Heat-Treated Steel (45 - 55 HRC)[○] | - | - | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Cast Aluminum Alloy (AC, ADC)[○] | Heat-Treated Steel (45 - 55 HRC)[◎] | Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] / Thermoplastic (PVC, Nylon etc.)[○] | - | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[○] / Thermoplastic (PVC, Nylon etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] |
Tap Model | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Tapping Cutter | Point Tap | Die | Tapping Cutter | Spiral Tap | Spiral Tap | Rolled Tap | Point Tap | Point Tap | Point Tap | Rolled Tap | Rolled Tap | Rolled Tap | Tapping Related Tools | Tapping Related Tools | Spiral Tap | Point Tap | Die | Spiral Tap | Spiral Tap | Point Tap | Spiral Tap | Hand Tap | Spiral Tap | Spiral Tap | Repair / Removal Tool | Hand Tap | Tapping Cutter | Point Tap | Point Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Spiral Tap | Rolled Tap | Spiral Tap | Spiral Tap |
Bore Model | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | - | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | - | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | - | - | For Blind Holes | For Through Holes / For Blind Holes | - | For Blind Holes | For Blind Holes | For Through Holes | For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Through Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | - | - | For Blind Holes | For Blind Holes | For Blind Holes |
Coating Presence | None | None | Included | Included | None | Included | Included | None | Included | Included | Included | Included | Included | Included | Included | Included | None | Included | None | None | Included | Included | None | Included | None | None | Included | Included | None | None | None | None | Included | None | None | Included | Included | Included | None | Included | Included | - | Included | None | None |
Coating Type | Non-Coated | Non-Coated | TiCN | Others | Non-Coated | TiN | Others | - | TiAlN | TiN | Others | TiCN | Others | TiN | CrN | TiN | Non-Coated | TiCN | Non-Coated | Non-Coated | TiN | TiAlN | - | TiCN | Non-Coated | Non-Coated | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | Non-Coated | Non-Coated | TiCN | TiCN | TiCN | Non-Coated | Others | TiCN | - | TiCN | - | - |
Overall Length (L)(mm) | 30 ~ 165 | 34 ~ 105 | 46 ~ 82 | 34 ~ 250 | 36 ~ 105 | 90 ~ 210 | 80 ~ 200 | - | 57 ~ 115 | 70 | 46 ~ 95 | 30 ~ 75 | 34 ~ 120 | 46 ~ 150 | 46 | 80 ~ 150 | 100 ~ 150 | 70 ~ 120 | - | - | 40 ~ 105 | 46 ~ 82 | - | 46 ~ 120 | 40 ~ 120 | 40 ~ 120 | 70 ~ 95 | 46 ~ 82 | 44 ~ 130 | 46 ~ 82 | 60 ~ 80 | 46 ~ 82 | 62 ~ 89 | 100 ~ 150 | 62 | 30 ~ 82 | 60 ~ 200 | 30 ~ 220 | 32 ~ 75 | 30 ~ 75 | 40 ~ 105 | - | 36 ~ 62 | 46 ~ 105 | 42 ~ 62 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy