(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Screw Hole Related Tools（Bore Model：For Through Holes）
Search by specifying the lower class category
Dies
Forming Taps
Hand Taps
Pipe Taps
Spiral Point Taps
Spiral Flute Taps
Tap Wrenches
Thread Mills
Threading Repair & Extraction Tools
Threading Tools
| Days to Ship |
|
|---|
-
Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Carbide, TiAlN Coated, UH-CT
YAMAWA
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
- Volume Discount
Days to Ship: 8 Days or more -
Taper Pipe Taps - Carbide, Long Shank, OT-LT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - X Performer, Grooveless, S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Through Hole Use, TiN Coated, 1015
GUHRING
[Features]
· JIS standard compliant tap for through holes.
· Supports a wide range of work materials from general steel to stainless steel.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - Carbide, for Cast Iron, N-CT FC
YAMAWA
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
- Volume Discount
Days to Ship: 8 Days or more -
Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML
MISUMI
Threading cutters for stable high-speed processing are available at a special price (C-Value)
- Volume Discount
Days to Ship: 8 Days or more -
Thread Mills - Carbide, DLC Coated, DLC-ALCTM
MISUMI
For aluminum processing (C-Value)
- Volume Discount
Days to Ship: 8 Days or more -
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT
MISUMI
Proprietary coating and geometry for left-flute left-rotary cutting enables milling threading of hard steel up to HRC62.
- Volume Discount
Days to Ship: 10 Days or more -
Hand Taps - High Speed Steel, HT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Hand Taps - Through Hole/Blind Hole Use, HT
OSG
An HSS hand tap.
For complete product overview and details on Hand Taps - Through Hole/Blind Hole Use, HT see the sections below:- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Hand Taps - Carbide, Through Hole/Blind Hole Use, OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - Carbide, Long Shank, LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - Carbide, for Hardened Steels, VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
- Volume Discount
Days to Ship: 8 Days or more -
Taper Pipe Taps - Carbide, for Stainless Steels, Short Screw, EX-SUS-S-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
- Volume Discount
Days to Ship: 8 Days or more -
Parallel Pipe Taps - Carbide, Long Shank, OT-LT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
- Volume Discount
Days to Ship: 8 Days or more -
Threading Tools - High Speed Steel, Long Shank, EX-MCT
OSG
Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - for Stainless Steels, Oxidized, SU+PO/SU-PO
YAMAWA
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Performance, TiCN Coated, HP+ RZ/HP-RZ
YAMAWA
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - High Speed Steel, Through Hole/Blind Hole Use
YAMAWA
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - X Performer, Long Shank, LT-S-XPF
OSG
[Specifications]
· Shape: Roll tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]- Volume Discount
Days to Ship: 8 Days or more -
Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT
MISUMI
Now offering a special price on threading cutters for stable, high-speed machining
- Volume Discount
Days to Ship: 10 Days or more -
Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML
MISUMI
TS-coated version of the popular threading cutter
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
- Volume Discount
Days to Ship: 8 Days or more -
MISUMI
Carbide taps with dramatically improved tool life (C-Value
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
- New Products
Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP
MISUMI
NEW ITEM: A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and prevents tapping issues.
SLIDE DISCOUNT: Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - Carbide, TiCN Coated, EHT
Nachi-Fujikoshi
Carbide tap with a TiCN coating treatment applied to the carbide base metal.
[Features]
· Excellent abrasion resistance and adhesion resistance.
· Improved chip discharge performance and service life.
[Applications]
· Ideal for mass tapping of aluminum and cast iron, etc.- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Speed Steel, Oxidized, TFST
Nachi-Fujikoshi
A rise up type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips.
· Less inconsistent screw precision.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Speed Steel, TFL
Nachi-Fujikoshi
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips and provides stable screw accuracy.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Ideal for rolled threading of non-ferrous metals such as aluminum.- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Speed Steel, TFS
Nachi-Fujikoshi
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips and provides stable screw accuracy.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Ideal for rolled threading of non-ferrous metals such as aluminum.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - HR Coated for Nickel Alloy, WHR-NI-SFT
OSG
A highly rigid cutting edge is realized by combining spiral taps with point grooves. Enables stable processing with a long service life for nickel base alloy (40 to 45 HRC) after aging treatment
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - Carbide, for Hardened Steels, WH55-OT
OSG
Ideal for tapping hardened steel up to 55 HRC
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - High Speed Steel, Straight Fluted, HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - High Speed Steel, Long Shank, HL-LT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
- Volume Discount
Days to Ship: 8 Days or more -
Threading Tools - Spatter Removal Hand Tap, SR-HT
OSG
Ideal for removing welding spatter and chips from the interior of female screws
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - for Stainless Steels, Oxidized, EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
- Volume Discount
Days to Ship: Same day Show Stock Products
-
Hand Taps - High Speed Steel, Long Shank, EX-LT
OSG
Long shank type.
For complete product overview and details on Hand Taps - High Speed Steel, Long Shank, EX-LT see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - High Speed Steel, Oxidized, H-HT
OSG
Oxidized to prevent welding.
For complete product overview and details on Hand Taps - High Speed Steel, Oxidized, H-HT see the sections below:- Volume Discount
Days to Ship: Same day Show Stock Products
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Thread Size (Nominal) |
| Pitch (P), Thread Count(mm) |
| Number of Chamfered Threads (Lcf) |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating Presence |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | YAMAWA | OSG | OSG | GUHRING | OSG | YAMAWA | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA | YAMAWA | YAMAWA | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series | Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT | Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT | Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT | Taper Pipe Taps - Carbide, for Stainless Steels, Short Screw, EX-SUS-S-TPT | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT | Spiral Point Taps - for Stainless Steels, Oxidized, SU+PO/SU-PO | Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT | Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】 | Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】 | Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】 | Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT | ||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 8 Days or more |
Same day
Show Stock Products |
| Thread Types | Meter / Unified | Meter | Pipe Taper | Meter | Meter | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter / Unified | Meter | Pipe Taper | Pipe Taper | Pipe Parallel | Meter | Meter / Unified / Wit | Meter / Unified | Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Unified | Unified | Meter | Meter | Meter / Unified | Meter |
| Thread Size (Nominal) | - | M2 ～ M20 | R1/2 ～ R3/8 | M1 ～ M45 | M2 ～ M20 | 1/2-20UNF ～ M24 | No.10-32UNF ～ M24 | M3 ～ M20 | M3 ～ M16 | M2 ～ M12 | M3 ～ M10 | M1 ～ M38 | M1.4 ～ M20 | M3 ～ M20 | M2 ～ M20 | 1/2UN ～ M36 | M3 ～ M14 | R1 ～ R3/8 | R1"1/4 ～ R5/8 | G1/2 ～ G3/8 | M10 ～ M12 | No.10-32UNF ～ M30 | No.10-32UNF ～ M20 | No.10-24UNC ～ 3/4-16UNF | M3 ～ M12 | M1.4 ～ M20 | M3 ～ M12 | M3 ～ M10 | M3 ～ M10 | M2 ～ M12 | M3 ～ M10 | M2 ～ M24 | M3 ～ M12 | M1.4 ～ M10 | M1.4 ～ M10 | M1.4 ～ M6 | M4 ～ M8 | M3 ～ M12 | M8 | No8UN ～ No10UN | No6UN | M5 ～ M12 | M3 | 3/8UN ～ M12 | M4 ～ M16 |
| Pitch (P), Thread Count(mm) | 0.25 ～ 32 | 0.4 ～ 2.5 | 14 ～ 28 | 0.2 ～ 4.5 | 0.4 ～ 2.5 | 0.25 ～ 3 | 0.3 ～ 3 | 0.5 ～ 2.5 | 0.5 ～ 2 | 0.4 ～ 1.75 | 0.5 ～ 1.5 | 0.25 ～ 40 | 0.3 ～ 2.5 | 0.5 ～ 2.5 | 0.4 ～ 2.5 | 0.3 ～ 44 | 0.5 ～ 2 | 11 ～ 28 | 11 ～ 14 | 14 ～ 28 | 1.5 | 0.3 ～ 3.5 | 0.25 ～ 1.75 | - | 0.5 ～ 1.75 | 0.3 ～ 2.5 | 0.5 ～ 1.75 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.4 ～ 1.75 | 0.5 ～ 1.5 | 0.4 ～ 3 | 0.5 ～ 1.75 | 0.3 ～ 1.5 | 0.3 ～ 1.5 | 0.3 ～ 1 | 0.7 ～ 1.25 | 0.5 ～ 1.75 | 1.25 | 24 ～ 32 | 32 | 0.8 ～ 1.25 | 0.5 | 1.25 ～ 16 | 0.7 ～ 1.75 |
| Number of Chamfered Threads (Lcf) | - | 5P | 2.5P | 2P ～ 4P | - | 5P | 1.5P ～ 3P | - | - | - | 1.5 P ～ 9 P | 1.5P ～ 9P | 1.5P ～ 3P | 1.5P ～ 3P | 3P | 5P | 5P | 2.5P | 2.5P | 3P | 3P | 5P | 2P ～ 4P | 1.5P ～ 5P | - | - | - | 2 P ～ 4 P | 5 P | 5 P | 1.5 P ～ 3 P | 5 P | 1.5P ～ 3P | 4P | 4P | 4P | 2.5P | 2.5P ～ 5P | 2P | 1.5P ～ 5P | 1.5P | 5P | 1.5P | 1.5P ～ 5P | 1.5P ～ 5P |
| Tool Material Type | Carbide | Carbide | Carbide | Powdered High-Speed Steel / Vanadium High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-Speed Steel | Carbide | Vanadium High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Cobalt High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○/◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass Cast Iron (BsC)[○/◎] / Rolled Aluminum Material (AL)[○/◎] / Cast Aluminum Alloy (AC, ADC)[○/◎] / Cast Magnesium Alloy (MC)[○/◎] / Zinc Alloy Castings (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[○/◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[○] / Thermoplastic (PVC, Nylon etc.)[○] | High-Hardness Steel (50 - 60 HRC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | - | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | Heat-Treated Steel (45 - 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | High-Hardness Steel (50 - 60 HRC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Stainless Steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Steel (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Cast Steel (SC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / High-Hardness Steel (50 - 60 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Cast Steel (SC)[○] / Cast Iron (FC)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] | Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] | Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] | Nickel-Based Alloy (Inconel Equivalent)[◎] | Heat-Treated Steel (45 - 55 HRC)[◎] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | - | Stainless Steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] |
| Tap Model | Tapping Cutter | Point Tap | Pipe Tap | Rolled Tap | Point Tap | Point Tap | Hand Tap | Tapping Cutter | Tapping Cutter | Tapping Cutter | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Point Tap | Point Tap | Pipe Tap | Pipe Tap | Pipe Tap | Tapping Related Tools | Point Tap | Rolled Tap | Hand Tap | Rolled Tap | Tapping Cutter | Tapping Cutter | Rolled Tap | Point Tap | Point Tap | Hand Tap | Point Tap | Hand Tap | Rolled Tap | Rolled Tap | Rolled Tap | Spiral Tap | Hand Tap | Rolled Tap | Hand Tap | Hand Tap | Repair / Removal Tool | Hand Tap | Hand Tap | Hand Tap |
| Bore Model | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes |
| Coating Presence | Included | Included | None | Included | Included | Included | None | Included | Included | Included | None | None | None | None | Included | None | Included | None | None | None | None | None | Included | None | Included | Included | Included | Included | Included | None | None | None | Included | None | None | None | Included | Included | Included | None | None | None | None | None | None |
| Coating Type | For High Hardness (Silicone-Based) / Others | TiAlN | Non-Coated | TiCN | TiN | Others | - | TiAlN | DLC | TiAlN | - | Non-Coated | Non-Coated | Non-Coated | TiCN / Others | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | TiCN | - | Others | TiAlN | For High Hardness (Silicone-Based) | TiN | TiN | - | - | Non-Coated | TiCN | - | - | - | Others | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 40 | 40 ～ 105 | 100 ～ 150 | 30 ～ 220 | 40 ～ 105 | 34 ～ 120 | 34 ～ 120 | 57 ～ 115 | 57 ～ 92 | 58 ～ 73 | 46 ～ 75 | 30 ～ 165 | 34 ～ 105 | 100 ～ 150 | 40 ～ 105 | 34 ～ 155 | 46 ～ 88 | 55 ～ 95 | 82 ～ 105 | 100 ～ 150 | 150 | 36 ～ 700 | 36 ～ 105 | 60 ～ 105 | 80 ～ 150 | 39 ～ 105 | 48 ～ 74 | 46 ～ 75 | 46 ～ 150 | 40 ～ 82 | 46 ～ 75 | 40 ～ 120 | 46 ～ 82 | 34 ～ 75 | 34 ～ 75 | 34 ～ 62 | 52 ～ 70 | 46 ～ 82 | 150 | 60 ～ 62 | 100 | 60 ～ 80 | 46 | 150 | 52 ～ 95 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Thread Types
- Meter
- Unified
- Wit
- Perforation
- Pipe Taper
- Pipe Parallel
- Miniature
- Others
-
Metric / Inch
- metric
-
Thread Size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- S0.1
- No.10-32UNF
- No.10-24UNC
- No.12-28UNF
- No.12-24UNC
- S0.2
- No.2-64UNF
- No.2-56UNC
- S0.3
- No.3-56UNF
- No.3-48UNC
- S0.4
- No.4-48UNF
- No.4-40UNC
- S0.5
- No.5-44UNF
- No.5-40UNC
- No.6
- S0.6
- No.6-40UNF
- No.6-32UNC
- S0.7
- S0.8
- No.8-36UNF
- No.8-32UNC
- S0.9
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- R1
- S1
- W1
- 1'-12UNF
- 1´-11
- 1-8UNC
- 1'-8UNC
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- W1"1/2
- 1 1/2-8UN
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- R1/2
- Rc1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- R1/4
- Rc1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- R1/8
- Rc1/8
- SM1/8
- W1/8
- 1/8-28
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- M1.1
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2UN
- G2
- M2
- NPS2
- NPT2
- No2UN
- R2
- W2
- 2-8UN
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- No3UN
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- R3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- R3/8
- Rc3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3～10
- SM3/16
- W3/16
- 3/16W24
- SM3/32
- M3.5
- M4
- No4UN
- №4-40UNC
- M4～6
- M4.5
- M5
- No5UN
- №5-40UNC
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16UN
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- M6
- No6UN
- No6-40UNF
- №6-32UNC
- M7
- PG7
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16UN
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- M8
- No8UN
- TV8
- №8-32UNC
- M9
- PG9
- 9/16UN
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- M10
- No10UN
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/64
- M12
- No12UN
- M13
- PG13.5
- M14
- M15
- SM15/64
- M16
- PG16
- M17
- M18
- M19
- M20
- M21
- PG21
- M22
- M23
- M24
- M25
- M26
- M27
- M28
- PG29
- M30
- M32
- M33
- M34
- M35
- M36
- PG36
- M38
- M39
- M40
- M42
- PG42
- M45
- M48
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Thread Count(mm)
-
Number of Chamfered Threads (Lcf)
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Heat-Treated Steel (45 - 55 HRC)
- High-Hardness Steel (50 - 60 HRC)
- Tool Steel (Before SKD Quenching)
- Cast Steel (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Cast Magnesium Alloy (MC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
- Nickel-Based Alloy (Inconel Equivalent)
- Thermosetting Plastic (Bakelite, Phenol etc.)
- Thermoplastic (PVC, Nylon etc.)
-
Tap Model
-
Bore Model
-
Coating Presence
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- OSG (82)
- YAMAWA (41)
- Nachi-Fujikoshi (7)
- GUHRING (3)
- Trusco Nakayama (2)
- RUKO (1)
- ENGINEER (0)
- NEWSTRONG (0)
- Rennsteig Tools (0)
- ISHIHASHI (0)
- LIGHTSEIKI (0)
- UNION TOOL (0)
- NS TOOL (0)
- SANDVIK (0)
- EIKOSHA (0)
- TANOI (0)
- NOGA JAPAN (0)
- ESCO (0)
- SKC (0)
CAD
-
- 2D
- 3D
Related Categories to Screw Hole Related Tools
-
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy