(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSES230P MUGEN-COATING 2-Flute Sharp Edge Short End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSEM230 MUGEN-COATING 2-Flute Medium End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSE345 MUGEN-COATING 3-Flute End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 3
Days to Ship: | 8 Days or more |
---|
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSE430P MUGEN-COATING 4-Flute Sharp Edge End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSEM430 MUGEN-COATING 4-Flute Medium End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSZ345 MUGEN-COATING POWER "Z" End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 3
Days to Ship: | 8 Days or more |
---|
MSE230M MUGEN-COATING 2-Flute End Mill with Measured Diameter
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSX440 MUGEN-COATING POWER End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Ultra-Small R
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX225 MUGEN-COATING 2-Flute LEAD 25 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX425 MUGEN-COATING 4-Flute LEAD 25 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX430 MUGEN-COATING 4-Flute LEAD 30 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX235 MUGEN-COATING 2-Flute LEAD 35 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX240 MUGEN-COATING 2-Flute LEAD 40 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MX245 MUGEN-COATING 2-Flute LEAD 45 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 6
Days to Ship: | 8 Days or more |
---|
MUGEN-COATING 4-Flute End Mill MSE445
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MUGEN-COATING 2-Flute End Mill MSE245
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
SED2MA Medium Square End Mill, 2-Flute, OK Coated
OKAZAKI
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SED4A Square End Mill, 4-Flute, OK Coated
OKAZAKI
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
SED4MA Medium Square End Mill, 4-Flute, OK Coated
OKAZAKI
A 4-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SPSED4A SP Series Square End Mill 4-Flute OK Coated
OKAZAKI
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
DZ-COAT Solid End Mill, DZ-DES2-L Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 8 Days or more |
---|
DZ-COAT Solid End Mill, DZ-DES2-S Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 10 Days or more |
---|
Solid One Cut End Mill DZ-OCEL2
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 10 Days or more |
---|
Solid One Cut End Mill DZ-OCEL4
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 8 Days or more |
---|
Solid One Cut End Mill DZ-OCES2
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 10 Days or more |
---|
Unequal Lead End Mill Regular 4-Flute for High Hardness Steel RF100H 3895
GUHRING
Capable of machining 52 HRC or harder high hardness steel.
Days to Ship: | 8 Days or more |
---|
End Mill with 2 Carbide Solid Blades KSEA-2
KYOWASEIKO
Lineup with blade length from 1 to 10 times the blade diameter.
Days to Ship: | 10 Days or more |
---|
Carbide Miniature End Mill with 4 Flutes KMSEA-4
KYOWASEIKO
Lineup of blade diameters from φ0.5 to φ3 in 0.1 increments.
Days to Ship: | 10 Days or more |
---|
Carbide Miniature End Mill KMSEA-2
KYOWASEIKO
Lineup of blade diameters from φ0.1 to φ3 in 0.01 increments.
Days to Ship: | 8 Days or more |
---|
SPSEE3ZA Vertical-Feed, Strengthened SP Series Roughing Mill 3 Flutes / OK Coated
OKAZAKI
A non-stepped vertical feed reinforced end mill that enables vertical feeding going straight on to grooving.
Days to Ship: | 8 Days or more |
---|
SPSEE4GA Heavy-Duty Cutting SP Series Steel Power Mill 4 Flutes / OK Coated
OKAZAKI
End mill with a unique reinforced blade type with good chip discharge properties that enables heavy duty cutting and high speed machining.
Days to Ship: | 10 Days or more |
---|
V Series Carbide Square End Mill, 4 Flutes
PROCHI
[Features]
· Carbide blade reduces blade tip wear during machining
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
Brand | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | DIJET | DIJET | DIJET | DIJET | DIJET | GUHRING | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | OKAZAKI | OKAZAKI | PROCHI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | MSE230M MUGEN-COATING 2-Flute End Mill with Measured Diameter | Unequal Lead End Mill Regular 4-Flute for High Hardness Steel RF100H 3895 | SPSEE3ZA Vertical-Feed, Strengthened SP Series Roughing Mill 3 Flutes / OK Coated | SPSEE4GA Heavy-Duty Cutting SP Series Steel Power Mill 4 Flutes / OK Coated | ||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 0.1 ~ 12 | 0.1 ~ 12 | 0.5 ~ 12 | 3 ~ 12 | 1 ~ 12 | 1 ~ 12 | 1 ~ 20 | 1 ~ 12 | 0.1 ~ 6 | 3 ~ 18 | 0.3 ~ 12 | 1 ~ 12 | 1 ~ 12 | 0.1 ~ 12 | 1 ~ 12 | 0.3 ~ 12 | 1 ~ 12 | 0.3 ~ 12 | 1 ~ 12 | 5 ~ 12 | 2 ~ 12 | 2 ~ 12 | 1 ~ 12 | 2 ~ 32 | 3 ~ 12 | 5 ~ 12 | 0.2 ~ 3 | 0.2 ~ 6 | 8 ~ 14 | 3 ~ 6 | 5 ~ 10 | 6 ~ 20 | 1 ~ 4 | 0.5 ~ 3 | 0.1 ~ 3 | 2 ~ 20 | 3 ~ 20 | 1 ~ 6 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[○/◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] | - | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[○] |
Flute Length (ℓ)(mm) | 0.15 ~ 30 | 0.15 ~ 24 | 2 ~ 48 | 8 ~ 30 | 2.5 ~ 30 | 2.5 ~ 30 | 4 ~ 80 | 1.5 ~ 26 | 0.15 ~ 15 | 8 ~ 32 | 0.3 ~ 12 | 1 ~ 12 | 2 ~ 24 | 0.3 ~ 36 | 3 ~ 36 | 1.2 ~ 48 | 4 ~ 48 | 1.5 ~ 60 | 5 ~ 60 | 10 ~ 30 | 5 ~ 30 | 5 ~ 30 | 4 ~ 36 | 6 ~ 55 | 12 ~ 36 | 15 ~ 25 | 1.5 ~ 30 | 0.4 ~ 15 | 40 ~ 70 | 20 ~ 30 | 15 ~ 25 | 13 ~ 38 | 1 ~ 40 | 1 ~ 8 | 0.2 ~ 8 | 4 ~ 40 | 10 ~ 45 | 3 ~ 12 |
Number of Flutes(sheet) | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 3 | 2 | 4 | 2 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 4 | 6 | 4 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 2 | 4 | 2 | 4 | 2 | 3 | 4 | 4 |
Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
Link Diameter (d)(mm) | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 6 | 6 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 32 | 6 ~ 12 | 6 ~ 12 | 3 ~ 4 | 3 ~ 6 | 8 ~ 16 | 6 | 6 ~ 10 | 6 ~ 20 | 4 ~ 6 | 3 | 3 | 4 ~ 20 | 6 ~ 20 | 4 ~ 6 |
Overall Length (L)(mm) | 45 ~ 80 | 45 ~ 80 | 50 ~ 110 | 50 ~ 80 | 45 ~ 80 | 45 ~ 80 | 50 ~ 140 | 45 ~ 80 | 45 ~ 55 | 55 ~ 105 | 45 ~ 80 | 45 ~ 80 | 45 ~ 80 | 45 ~ 80 | 45 ~ 80 | 45 ~ 105 | 45 ~ 105 | 45 ~ 105 | 45 ~ 105 | 60 ~ 80 | 45 ~ 80 | 45 ~ 80 | 45 ~ 75 | 45 ~ 130 | 45 ~ 75 | 50 ~ 75 | 40 ~ 70 | 40 ~ 60 | 90 ~ 130 | 60 ~ 70 | 50 ~ 70 | 57 ~ 104 | 50 ~ 80 | 60 | 50 | 45 ~ 105 | 45 ~ 105 | 50 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 21 ~ 54 | - | - | - | - | - | - |
Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface | Flat Surface / Side Surface | Flat Surface / Side Surface | Groove / Thrust (Z-Feed) | Groove / Thrust (Z-Feed) | Side Surface / Groove | Side Surface / Groove | Side Surface / Groove | - | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Side Surface / Groove | Side Surface / Groove | - |
Flute Shape | With Lead | Sharp Corner | With Lead | With Lead | With Lead | Sharp Corner | With Lead | With Lead | With Lead | Ultra-Small R | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | - | - | Sharp Corner | Sharp Corner | - | - | - |
Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Uneven Lead | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy