(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Without Torsion
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Blade Shape: Straight edge
Days to Ship: | 8 Days or more |
---|
SLE2 Long Shank Slotting End Mill G2
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Without Torsion
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Blade Shape: Straight edge
Days to Ship: | 8 Days or more |
---|
SLE2 Special Long Shank Slotting End Mill G2
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Without Torsion
•Coating: Non-Coated
•Flute Length (ℓ) (mm): 21
•Link Diameter (d) (mm): 32
Days to Ship: | 8 Days or more |
---|
TAC2, 2-Flute, A-Cut End Mill MA
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
TAC2 Long 2-Flute A Cut End Mill MA
ASAHI TOOLS
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Flute Diameter D (f): 22
Days to Ship: | 8 Days or more |
---|
TAL2, 2-Flute, Alumik 2000 End Mill AH10
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
BED2 Brazed Square End Mill, 2-Flute, Non-Coated
OKAZAKI
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Days to Ship: | 12 Days or more |
---|
BPD4 Brazed Square End Mill, 4-Flute, Non-Coated
OKAZAKI
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Days to Ship: | 12 Days or more |
---|
SAD2 Square End Mill for Aluminum, 2-Flute, Non-Coated
OKAZAKI
Endmill for aluminum with sharp corners and a blade for aluminum.
Days to Ship: | 12 Days or more |
---|
SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated
OKAZAKI
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
Days to Ship: | 12 Days or more |
---|
SED2M Medium Square End Mill, 2-Flute, Non-Coated
OKAZAKI
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SED2MA Medium Square End Mill, 2-Flute, OK Coated
OKAZAKI
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SED4 Square End Mill, 4-Flute, Non-Coated
OKAZAKI
An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.
Days to Ship: | 9 Days or more |
---|
SED4A Square End Mill, 4-Flute, OK Coated
OKAZAKI
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
SED4MA Medium Square End Mill, 4-Flute, OK Coated
OKAZAKI
A 4-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SPSED4A SP Series Square End Mill 4-Flute OK Coated
OKAZAKI
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
Solid End Mill for Aluminum Machining AL-SEES3-XLS-R02 Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 8 Days or more |
---|
Beam End Mill (for Aluminum) VN-ALES2 Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 10 Days or more |
---|
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 10 Days or more |
---|
DIJET
[Features]
· Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 8 Days or more |
---|
GUHRING
[Features]
· Shows excellent performance for machining aluminum or composite material such as CFRP.
· Internal oil supply type.
Days to Ship: | 26 Days or more |
---|
PCD End Mill, 3-Flute Long Shank 5496
GUHRING
[Features]
· Shows excellent performance for machining aluminum or composite material such as CFRP.
· Internal oil supply type.
Days to Ship: | 26 Days or more |
---|
Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESS (Short)
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2
Days to Ship: | 10 Days or more |
---|
Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESL (Long)
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKS (Short)
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2
Days to Ship: | 10 Days or more |
---|
Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKM (Medium)
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2
Days to Ship: | 10 Days or more |
---|
Focus on Accuracy / Finished Surface 4FESM
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 4
Days to Ship: | 10 Days or more |
---|
Focus on Accuracy / Finished Surface 4FEKM
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 4
Days to Ship: | 10 Days or more |
---|
Focus on Accuracy / Finished Surface, for Automatic Lathes 2FESW
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2
Days to Ship: | 10 Days or more |
---|
Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 3
Days to Ship: | 8 Days or more |
---|
Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Overall Length (L) (mm): 45
Days to Ship: | 8 Days or more |
---|
Axel Mill, 3-D High Efficiency Type, 3ZFKS (Short)
KYOCERA
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 3
Days to Ship: | 10 Days or more |
---|
Axel Mill, 3-D High Efficiency Type, 3ZFKM (Medium)
KYOCERA
•Model: Square
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 3
•Coating: Mega-Coat
Days to Ship: | 10 Days or more |
---|
Axel Mill, High Feed High Efficiency Type, 4MFR (Radius Type)
KYOCERA
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
Unequal Flute Spacing / Wiper Cutting Edge Type for Aluminum and Nonferrous Metals 3NESM
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Coating: Non-Coated
•Work Material: Aluminum
•Number Of Flutes (sheet): 3
Days to Ship: | 11 Days or more |
---|
For Counterbore Processing 2ZDK
KYOCERA
•Model: Square
•Coating: For General Steel (AlCrN etc.)
•Processing Application: Countersunk
•Number Of Flutes (sheet): 2
•Coating: MEGACOAT NANO
Days to Ship: | 8 Days or more |
---|
PCD 2-Flute Spiral Square End Mill DSE-2
KYOWASEIKO
The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.
Days to Ship: | 10 Days or more |
---|
Carbide End Mill with 2 Flutes for Resin Processing PSE-2
KYOWASEIKO
Blade shape has been given excellent sharpness for resin machining.
Days to Ship: | 10 Days or more |
---|
Carbide End Mill for Rib for Resin Processing PRE-2
KYOWASEIKO
Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.
Days to Ship: | 10 Days or more |
---|
End Mill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC
KYOWASEIKO
[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking
Days to Ship: | 10 Days or more |
---|
End Mill with 3 Carbide Flutes for Aluminum Alloys ALE-3DLC
KYOWASEIKO
[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking
Days to Ship: | 10 Days or more |
---|
2-Flute, Short (OH1) MG-EDS-OH1
OSG
[Specifications]
· Shape: Square
· Work Material: General Steel, Tempering Steel, Cast Iron, Aluminum
[Applications]
· Flat / side / groove / rush (Z feed) / inclined cutting depth
Days to Ship: | 8 Days or more |
---|
For CFRP / Aluminum, Non-Coated 1-Flute
VAN HOORN
•Model: Square
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 1
•Cutting Edge Accuracy: h5
Days to Ship: | 14 Days or more |
---|
GCT+ 4 Flutes Anti-Vibration Division
GCT
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Number Of Flutes (sheet): 4
•Coating: ACR
•Vibration Damping Proofing: Split
Days to Ship: | 8 Days or more |
---|
Carbide 3-Flute Variable Split Variable Lead End Mill 38°/41° E130HX
7 LEADERS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Number Of Flutes (sheet): 3
•Coating: AlTiCrN
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
Brand | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | DIJET | DIJET | DIJET | DIJET | GUHRING | GUHRING | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | OSG | VAN HOORN | GCT | 7 LEADERS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated | Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESS (Short) | Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESL (Long) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKS (Short) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKM (Medium) | Focus on Accuracy / Finished Surface, for Automatic Lathes 2FESW | Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW | Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW | Axel Mill, High Feed High Efficiency Type, 4MFR (Radius Type) | Unequal Flute Spacing / Wiper Cutting Edge Type for Aluminum and Nonferrous Metals 3NESM | End Mill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC | Carbide 3-Flute Variable Split Variable Lead End Mill 38°/41° E130HX | |||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 9 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 26 Days or more | 26 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 14 Days or more | 8 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 3 ~ 50 | 3 ~ 30 | 5 ~ 30 | 10 ~ 40 | 22 | 14 ~ 50 | 20 ~ 50 | 20 ~ 50 | 1 ~ 12 | 1 ~ 12 | 1 ~ 12 | 1 ~ 12 | 2 ~ 32 | 2 ~ 32 | 3 ~ 12 | 5 ~ 12 | 6 ~ 22 | 3 ~ 12 | 10 ~ 60 | 4 ~ 16 | 14 ~ 20 | 14 ~ 20 | 1 ~ 16 | 1 ~ 16 | 3 ~ 16 | 3 ~ 16 | 1 ~ 16 | 3 ~ 16 | 3 ~ 13 | 3 ~ 13 | 3 ~ 13 | 6 ~ 12 | 3 ~ 16 | 3 ~ 16 | 3 ~ 20 | 4.2 ~ 4.5 | 0.2 ~ 6 | 0.2 ~ 6 | 0.3 ~ 5 | 1 ~ 16 | 3 ~ 16 | 1 ~ 12 | 4 | 1.5 ~ 5 | 1 ~ 20 |
Work Material | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] |
Flute Length (ℓ)(mm) | 8 ~ 35 | 8 ~ 21 | 21 | 20 ~ 50 | 60 | 25 ~ 60 | 32 ~ 63 | 32 ~ 63 | 3 ~ 32 | 3 ~ 32 | 4 ~ 36 | 4 ~ 36 | 6 ~ 55 | 6 ~ 55 | 12 ~ 36 | 15 ~ 25 | 9 ~ 33 | 6 ~ 12 | 10 ~ 200 | 16 ~ 55 | 8 ~ 20 | 8 ~ 20 | 1.5 ~ 24 | 4 ~ 48 | 4.5 ~ 24 | 10 ~ 32 | 2.5 ~ 32 | 10 ~ 32 | 3 ~ 8 | 3 ~ 8 | 3 ~ 8 | 9 ~ 18 | 6 ~ 35 | 8 ~ 35 | 12 ~ 38 | 20 ~ 21 | 0.2 ~ 3 | 0.6 ~ 21 | 0.6 ~ 10 | 2 ~ 32 | 9 ~ 48 | 2.5 ~ 26 | 22 | 4 ~ 15 | 3 ~ 38 |
Number of Flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 3 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 3 | 4 | 3 | 3 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 1 | 4 | 3 |
Model | Square | Square | Square | Square | Long Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | TiAlN | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | Non-Coated | For General Steel (AlCrN etc.) | Non-Coated | Non-Coated | Non-Coated | DLC | DLC | Non-Coated | Non-Coated | - | - |
Link Diameter (d)(mm) | 10 ~ 32 | 10 ~ 32 | 32 | 12 ~ 32 | 25 | 16 ~ 32 | 20 ~ 42 | 20 ~ 42 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 32 | 4 ~ 32 | 6 ~ 12 | 6 ~ 12 | 5 ~ 20 | 4 ~ 12 | 12 ~ 42 | 4 ~ 16 | 14 ~ 20 | 14 ~ 20 | 4 ~ 16 | 4 ~ 16 | 6 ~ 16 | 6 ~ 16 | 4 ~ 16 | 6 ~ 16 | 4 ~ 13 | 4 ~ 13 | 4 ~ 13 | 6 ~ 12 | 6 ~ 16 | 6 ~ 16 | 6 ~ 20 | 6 | 4 ~ 6 | 3 ~ 6 | 4 ~ 6 | 4 ~ 16 | 6 ~ 16 | 4 ~ 12 | 6 | 4 ~ 6 | 4 ~ 20 |
Overall Length (L)(mm) | 55 ~ 180 | 100 ~ 220 | 150 ~ 350 | 70 ~ 130 | 130 | 95 ~ 160 | 115 ~ 160 | 115 ~ 160 | 45 ~ 75 | 45 ~ 75 | 45 ~ 75 | 45 ~ 75 | 45 ~ 130 | 45 ~ 130 | 45 ~ 75 | 50 ~ 75 | 100 ~ 250 | 60 ~ 120 | 100 ~ 310 | 60 ~ 130 | 83 ~ 100 | 100 ~ 150 | 45 ~ 90 | 45 ~ 115 | 50 ~ 90 | 50 ~ 90 | 45 ~ 90 | 50 ~ 90 | 35 ~ 45 | 35 ~ 45 | 45 | 50 ~ 75 | 50 ~ 90 | 60 ~ 110 | 50 ~ 104 | 60 | 50 ~ 60 | 45 ~ 100 | 45 ~ 100 | 45 ~ 100 | 60 ~ 110 | 40 ~ 75 | 60 | 50 ~ 60 | 50 ~ 100 |
Length Under Neck (ℓ1)(mm) | 15 ~ 80 | 15 ~ 41 | 15 ~ 41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 ~ 52 | 38 ~ 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Processing Applications | Flat Surface / Countersunk | Flat Surface / Countersunk | Flat Surface / Countersunk | Side Surface / Groove / Countersunk | Side Surface / Groove / Countersunk | Side Surface / Groove / Countersunk | Flat Surface / Groove | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface | Flat Surface / Side Surface | Flat Surface / Side Surface | Flat Surface / Side Surface | Side Surface / Groove | Side Surface / Groove | - | Side Surface / Groove / Countersunk | - | - | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | - | Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk |
Flute Shape | - | - | - | C Surface | With Lead | Sharp Corner | C Surface | C Surface | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Ultra-Small R | Sharp Corner | C Surface | Sharp Corner | - | - | Sharp Corner | Sharp Corner | With Lead | With Lead | Sharp Corner | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | With Lead | - | - | - | Sharp Corner | Sharp Corner | - | - | Sharp Corner | - | - | With Lead |
Helix Angle (θ) | Without Torsion | Without Torsion | Without Torsion | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Without Torsion | Without Torsion | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | - | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
Loading...
[4-60/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy