(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
OSG
General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.
Days to Ship: | 8 Days or more |
---|
OSG
General purpose type 4-flute long blade end mill with FX coating for excellent heat resistance.
Days to Ship: | 8 Days or more |
---|
SAGC2T SA Coated Carbide 2-Flute Short Blade
S&K
[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· A general-purpose 2-flute type with pin angle specification.
Days to Ship: | 8 Days or more |
---|
End Mill with 2 Carbide Solid Blades KSE-2
KYOWASEIKO
Lineup of blade diameters from φ3 to φ6 in 0.01 increments.
Days to Ship: | 10 Days or more |
---|
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Counter Boring Series, for FX Counter Boring Machining, 2-Flute Short FX-ZDS
OSG
End mill dedicated for counterboring. Can be used for counterboring processing of hex bolts as well as a tool for pre-drilling processing on angled surface.
Days to Ship: | 8 Days or more |
---|
GCT+ 4 Flutes Anti-Vibration Core Power
GCT
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Number Of Flutes (sheet): 4
•Coating: TiSiN
•Vibration Damping Proofing: Available
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/0.01mm Designation Model
MISUMI
Blade diameter can be selected from extensive lineup of flute lengths in 0.01 mm increments
Days to Ship: | 9 Days or more |
---|
2-Flute Stub Type ("Guts" Mill) WX-G-EDSS
OSG
Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
Days to Ship: | 8 Days or more |
---|
WXL-Coated 4-Flute Short WXL-EMS
OSG
[Features]
· With its WXL hard lubricating coating, this end mill offers effective cutting performance on a wide range of materials, including general steel, quenched steel and copper alloys.
Recommended for both wet-type and dry-type milling.
Days to Ship: | 8 Days or more |
---|
4-Flute, Short (Vibration Proof Model, Multifunctional) UP-PHS
OSG
A multi-functional end mill which minimizes chatter to allow highly efficient machining of grooves and side walls.
Days to Ship: | 8 Days or more |
---|
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 5 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
The price of the low-cost classic XAL Series has been further reduced. [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model
MISUMI
Misumi's unique lineup of fine blade length is available at attractive low prices [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model
MISUMI
Popular XAL Series with the 4-blade structure that's ideal for side milling has been further reduced in price. [C-Value]
Days to Ship: | Same day or more |
---|
Show Stock Products
TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model
MISUMI
The lineup of fine intermediate blade length between short and regular is available only in Misumi
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/1.5D Flute Length (Stub) Model
MISUMI
Also exerts effectiveness in high-speed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model
MISUMI
26 Sizes of Standard Blade Length
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model
MISUMI
Compatible with deeper side milling
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model
MISUMI
A low blade flat type with the blade shape that's ideal for counter boring
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
The 3D blade length type that's capable of sophisticated grooving is also known for the producing the high-quality finish
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model
MISUMI
A long blade length type that is compatible with deep engraving [C-Value]
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Supports a wide range of applications from raw materials to high hardness steel.
Days to Ship: | 8 Days or more |
---|
OSG
A general-purpose 2-flute end mill which uses a high-toughness carbide alloy as its base material for excellent stability. Can be used for a wide range of work materials and enables highly reliable processing.
Days to Ship: | 8 Days or more |
---|
4-Flute, Short (Strong Heavy-Cutting Model / Uneven Lead Type) NEO-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
Deep Engraving Compatible Type Multifunction FXS-HPE
OSG
Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.
Days to Ship: | 8 Days or more |
---|
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
Champion Solid, Long Blade End Mill NCL-4
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
SPSED2A SP Series Square End Mill 2-Flute OK Coated
OKAZAKI
A 2-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium)
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type)
KYOCERA
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 4
Days to Ship: | 9 Days or more |
---|
Carbide End Mill for Rib KRE-2
KYOWASEIKO
Lineup of blade diameters from φ0.2 to φ6 in 0.1 increments. Longer neck section for deep machining.
Days to Ship: | 10 Days or more |
---|
XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 2-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 4-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 4-Flute/Long Model
MISUMI
User friendly TiAlN coated series with long blade length [C-Value]
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
A short blade length (stub) series that's ideal for high-speed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
2-blade regular size that can be used in a wide range of applications
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model
MISUMI
Lineups of fine intermediate blade length between regular and long are available only in MISUMI.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model
MISUMI
Compatible with Deep Engraving.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model
MISUMI
Shrink-Fit Chuck Supported Type
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model
MISUMI
The fine intermediate blade length between short and regular that's unique to Misumi
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
A standard regular size with high versatility
Days to Ship: | Same day or more |
---|
Show Stock Products
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Brand | OSG | OSG | S&K | KYOWASEIKO | MISUMI | OSG | GCT | MISUMI | OSG | OSG | OSG | DIJET | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | NS TOOL | NS TOOL | OKAZAKI | KYOCERA | KYOCERA | KYOWASEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | Carbide Counter Boring Series, for FX Counter Boring Machining, 2-Flute Short FX-ZDS | 4-Flute, Short (Vibration Proof Model, Multifunctional) UP-PHS | XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model | TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model | TSC Series Carbide Square End Mill, 4-Flute/1.5D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model | TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model | TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model | Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model | 4-Flute, Short (Strong Heavy-Cutting Model / Uneven Lead Type) NEO-PHS | Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium) | Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type) | XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model | TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model | TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model | TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | |||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 5 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||
Flute Diameter (D)(φ) | 2 ~ 30 | 3 ~ 30 | 0.5 ~ 20 | 3 ~ 6 | 1.5 ~ 25 | 3 ~ 20 | 3 ~ 20 | 3.15 ~ 19.99 | 1 ~ 12 | 1 ~ 30 | 3 ~ 12 | 15 ~ 50 | 0.1 ~ 20 | 0.1 ~ 20 | 1 ~ 20 | 0.5 ~ 12 | 2 ~ 12 | 1 ~ 20 | 1 ~ 12 | 3 ~ 16 | 2 ~ 20 | 0.5 ~ 12 | 2 ~ 20 | 9 ~ 12 | 3 ~ 25 | 10 ~ 14 | 0.1 ~ 12 | 2 ~ 6 | 1 ~ 25 | 0.2 ~ 16 | 3 ~ 16 | 0.2 ~ 6 | 1 ~ 20 | 1 ~ 20 | 2 ~ 20 | 3 ~ 12 | 0.5 ~ 12 | 0.5 ~ 20 | 0.1 ~ 20 | 0.2 ~ 20 | 0.5 ~ 12 | 1 ~ 12 | 2 ~ 12 | 1 ~ 16 | 1 ~ 20 |
Work Material | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] |
Flute Length (ℓ)(mm) | 6 ~ 45 | 12 ~ 67 | 1 ~ 45 | 10 ~ 15 | 6 ~ 120 | 8 ~ 38 | 8 ~ 45 | 3.5 ~ 48 | 1.5 ~ 18 | 2.5 ~ 45 | 8 ~ 26 | 26 ~ 60 | 0.2 ~ 40 | 0.3 ~ 60 | 2 ~ 40 | 1.25 ~ 30 | 3 ~ 18 | 2 ~ 40 | 4 ~ 48 | 8 ~ 32 | 5 ~ 60 | 2 ~ 48 | 10 ~ 56 | 19 ~ 26 | 6 ~ 50 | 15 ~ 21 | 0.2 ~ 24 | 10 ~ 25 | 2.5 ~ 45 | 0.4 ~ 32 | 4.5 ~ 48 | 0.3 ~ 9 | 3 ~ 60 | 2.5 ~ 38 | 6 ~ 38 | 12 ~ 30 | 0.5 ~ 12 | 0.75 ~ 30 | 0.2 ~ 40 | 0.6 ~ 60 | 1.75 ~ 42 | 4 ~ 48 | 2 ~ 12 | 2.5 ~ 40 | 3 ~ 60 |
Number of Flutes(sheet) | 4 | 4 | 2 | 2 | 4 | 2 | 4 | 2 | 2 | 4 | 4 | 4 ~ 6 | 2 | 2 | 4 | 2 | 4 | 4 | 4 | 3 | 4 | 2 | 4 | 2 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | 2 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 |
Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Coating | For General Steel (AlCrN etc.) | TiAlN | TiAlN | Non-Coated | - | TiAlN | - | Non-Coated | TiAlN | For General Steel (AlCrN etc.) | TiAlN | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | Non-Coated | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) |
Link Diameter (d)(mm) | 4 ~ 32 | 6 ~ 32 | 3 ~ 20 | 6 | 4 ~ 25 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 32 | 6 ~ 12 | 16 ~ 32 | 3 ~ 20 | 3 ~ 20 | 4 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 20 | 4 ~ 12 | 6 ~ 16 | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 10 ~ 12 | 6 ~ 25 | 8 ~ 12 | 4 ~ 12 | 4 ~ 6 | 4 ~ 25 | 4 ~ 16 | 6 ~ 16 | 4 ~ 6 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 4 ~ 12 | 4 ~ 20 | 3 ~ 20 | 3 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 4 ~ 20 |
Overall Length (L)(mm) | 40 ~ 125 | 50 ~ 145 | 50 ~ 115 | 50 | 60 ~ 250 | 50 ~ 125 | 50 ~ 100 | 40 ~ 105 | 40 ~ 75 | 40 ~ 125 | 60 ~ 100 | 84 ~ 128 | 40 ~ 110 | 40 ~ 110 | 40 ~ 110 | 45 ~ 85 | 40 ~ 75 | 40 ~ 110 | 45 ~ 100 | 50 ~ 110 | 45 ~ 130 | 45 ~ 100 | 50 ~ 125 | 70 ~ 75 | 50 ~ 120 | 130 ~ 160 | 45 ~ 80 | 50 ~ 65 | 45 ~ 120 | 45 ~ 90 | 60 ~ 110 | 40 ~ 120 | 45 ~ 130 | 40 ~ 105 | 40 ~ 105 | 50 ~ 90 | 40 ~ 65 | 40 ~ 105 | 35 ~ 110 | 40 ~ 130 | 45 ~ 95 | 45 ~ 100 | 40 ~ 65 | 45 ~ 105 | 45 ~ 130 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ~ 55 | - | 15 ~ 73 | 29 ~ 70 | - | 23 ~ 92 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 17 ~ 73 | 23 ~ 92 | 26 ~ 65 | 29 ~ 76 | - | 20 ~ 73 | 23 ~ 92 |
Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Countersunk | Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting |
Flute Shape | Sharp Corner | With Lead | Sharp Corner | Sharp Corner | - | With Lead | - | Sharp Corner / With Lead | With Lead | Sharp Corner / With Lead | With Lead | C Surface | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | Sharp Corner | With Lead | With Lead | With Lead | With Lead | Sharp Corner | Sharp Corner | With Lead | Sharp Corner | Sharp Corner / With Lead | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead |
Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | Weak Helix (15 to 25°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
Loading...
[4-60/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy