(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Square End Mills (Carbide)（Work Material：High-Hardness Steel – HRC60）
| Days to Ship |
|
|---|
-
OSG
General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute Stub Type ("Guts" Mill) WX-G-EDSS
OSG
Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
A general-purpose 2-flute end mill which uses a high-toughness carbide alloy as its base material for excellent stability. Can be used for a wide range of work materials and enables highly reliable processing.
- Volume Discount
Days to Ship: 8 Days or more -
Deep Engraving Compatible Type Multifunction FXS-HPE
OSG
Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 2D GSX2C-2D
Nachi-Fujikoshi
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]
· Blade Shape: With Lead
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Nachi-Fujikoshi
Capable of high-efficient machining of hardened materials. Suitable for wide side finishing.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 2D GSX4C-2D
Nachi-Fujikoshi
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 3-Flute Blade 2D GSX3C-2D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL Slot 1.5D GSXSLT-1.5D
Nachi-Fujikoshi
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 1D GSX4C-1D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 1.5D GSX2C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
Blade length is 1.5 times the blade diameter, an ultra-short blade that is ideal for high speed machining with high speed machining centers.
- Volume Discount
Days to Ship: 8 Days or more -
3-Flute, Stub Type Used for Slotting WX-SHTSS
OSG
End mill that enables continuous grooving after plunging without preprocessing. Number of tools in the magazine can be reduced.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
General-purpose 4-flute end mill in which high toughness carbide is used as the base material. Can be used for a wide range of work materials and enables highly reliable processing.
- Volume Discount
Days to Ship: 7 Days or more -
WX Super Coated, Multi-Flute, Short WXS-EMS
OSG
Ultra-heat-resistant, ultra-hard newly developed WX super coated high rigidity ball end mill. High-speed, high-precision machining of hardened steel as well as, of course, high-speed general steel machining.
- Volume Discount
Days to Ship: 7 Days or more -
OSG
Blade length is 1.5 times the blade diameter, an ultra-short blade that is ideal for high speed machining with high speed machining centers.
- Volume Discount
Days to Ship: 8 Days or more -
4-Flute Stub Type ("Guts" Mill) WX-G-EMSS
OSG
Heavy duty type 4-flute end mill with reinforced bottom blade corner. Capable of high-speed and high-feed cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
- Volume Discount
Days to Ship: 8 Days or more -
4-Flute, Slim Shank, Short Type FX-SS-EMS
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
- Volume Discount
Days to Ship: 8 Days or more -
4-Flute, Stub Type (Strong Heavy-Cutting Model) WX-PHSS
OSG
Next generation high torsion end mill with short blade length, great chip discharge performance, and high blade rigidity. Capable of high-feed processing at large cutting depth thanks to its rigid short blade length.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
Next generation high torsion end mill with medium blade length, great chip discharge performance, and high blade rigidity. Applicable to a wide range of work materials.
- Volume Discount
Days to Ship: 8 Days or more -
Single-Flute CBN End Mill, Short Type MBOS
OSG
CBN tip brazed type end mill. Exhibits true performance when machining hardened steel.
- Volume Discount
Days to Ship: 8 Days or more -
High Helix Short Type FX-MG-EHS
OSG
Even with the 4-flute grooving, it provides excellent chip discharge and prevents burring with excellent sharpness. A 3-flute version resilient to chatter is also available.
- Volume Discount
Days to Ship: 8 Days or more -
Multi-Flute, Short (High Rigidity) FXS-EMS
OSG
High-speed machining end mill with extremely high tool rigidity. High speed machining of hardened steel is also possible.
- Volume Discount
Days to Ship: 8 Days or more -
Multi-Flute, Short (Uneven Lead) NEO-EMS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
- Volume Discount
Days to Ship: 8 Days or more -
Multi-Flute, Long Shank, Short (High Rigidity) FXS-LS-EMS
OSG
Long shank end mill with extremely high tool rigidity. Machining is possible with a wide range of materials, from general materials to hardened steel.
- Volume Discount
Days to Ship: 8 Days or more -
Multi-Flute, Long (High Rigidity) FXS-EML
OSG
Long blade end mill with superb tool rigidity. Machining is possible with a wide range of materials, from general materials to hardened steel.
- Volume Discount
Days to Ship: 8 Days or more -
SSF120 CBN Super Surface End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: Ultra-Small R
•Coating: Non-Coated
•Overall Length (L) (mm): 50- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Square
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Overall Length (L) (mm): 50- Volume Discount
Days to Ship: 8 Days or more -
MHDH445 4-Flute Square-End Mill for High-Hardness
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Overall Length (L) (mm): 60- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
MHDH645 6-Flute Square-End Mill for High-Hardness
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 6- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
MHD445 MUGEN-COATING 4-Flute End Mill for Hardened Steel
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Overall Length (L) (mm): 60- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Square
•Helix Angle (θ): Without Torsion
•Flute Shape: With Lead
•Coating: Non-Coated
•Flute Diameter D (f): 0.1- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Square
•Helix Angle (θ): Without Torsion
•Flute Shape: With Lead
•Coating: Non-Coated
•Link Diameter (d) (mm): 4- Volume Discount
Days to Ship: 8 Days or more -
MUGEN-COATING PREMIUM 2-Flute LEAD 30 End Mill MXH230
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
MUGEN-COATING PREMIUM 2-Flute LEAD 35 End Mill MXH235
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 6- Volume Discount
Days to Ship: 8 Days or more -
MUGEN-COATING 4-Flute End Mill MSE445
NS TOOL
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4- Volume Discount
Days to Ship: 8 Days or more -
HGGCNV2T HG Coated Carbide NewVictory 2-Flute Blade
S&K
Machining is possible with a wide range of materials, from raw materials to hardened steel.
[Features]
· A general-purpose 2-flute type with pin angle specification.
· Excellent chip discharge.- Volume Discount
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Flute Diameter (D)(φ) |
| Work Material |
| Flute Length (ℓ)(mm) |
| Number of Flutes(sheet) |
| Model |
| Coating |
| Link Diameter (d)(mm) |
| Overall Length (L)(mm) |
| Length Under Neck (ℓ1)(mm) |
| Processing Applications |
| Flute Shape |
| Helix Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | Nachi-Fujikoshi | OSG | OSG | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | S&K |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
| Flute Diameter (D)(φ) | 2 ～ 30 | 1 ～ 12 | 1 ～ 20 | 9 ～ 12 | 10 ～ 14 | 0.2 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 6 ～ 20 | 1 ～ 20 | 1 ～ 20 | 2 ～ 32 | 1 ～ 20 | 1 ～ 16 | 1 ～ 20 | 1 ～ 20 | 0.2 ～ 30 | 3 ～ 16 | 3 ～ 12 | 2 ～ 10 | 8 ～ 10 | 3 ～ 16 | 3 ～ 12 | 8 ～ 12 | 2.5 ～ 20 | 3 ～ 5 | 6 ～ 12 | 3 | 1.5 ～ 30 | 6 ～ 25 | 3 ～ 30 | 6 ～ 25 | 0.2 ～ 2 | 0.03 ～ 0.1 | 1 ～ 4 | 5 ～ 12 | 1 ～ 4 | 0.1 | 0.2 ～ 1 | 0.1 ～ 6 | 0.1 ～ 6 | 5 ～ 12 | 2 ～ 12 | 1 ～ 12 |
| Work Material | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[◎] | High-Hardness Steel – HRC60[○] | High-Hardness Steel – HRC60[○] |
| Flute Length (ℓ)(mm) | 6 ～ 45 | 1.5 ～ 18 | 3 ～ 38 | 19 ～ 26 | 15 ～ 21 | 0.5 ～ 50 | 2 ～ 40 | 1.5 ～ 30 | 2.5 ～ 50 | 25 ～ 75 | 1.5 ～ 30 | 2 ～ 40 | 6 ～ 70 | 2.5 ～ 40 | 1.5 ～ 24 | 1 ～ 20 | 1.5 ～ 30 | 0.4 ～ 45 | 4.5 ～ 24 | 4.5 ～ 18 | 6 ～ 22 | 19 ～ 22 | 4.5 ～ 24 | 4.5 ～ 18 | 20 ～ 30 | 3.8 ～ 30 | 10 ～ 17 | 3 ～ 6 | 8 | 5 ～ 55 | 12 ～ 50 | 10 ～ 55 | 25 ～ 90 | 0.1 ～ 1 | 0.03 ～ 0.1 | 2 ～ 8 | 10 ～ 36 | 1.5 ～ 8 | 0.04 | 0.08 ～ 0.4 | 0.2 ～ 12 | 0.3 ～ 18 | 10 ～ 30 | 5 ～ 30 | 3 ～ 24 |
| Number of Flutes(sheet) | 4 | 2 | 4 ～ 8 | 2 | 4 | 2 | 2 | 3 | 4 | 6 ～ 8 | 4 | 4 | 4 | 3 | 3 | 4 | 2 | 2 | 2 | 3 | 4 | 6 | 4 | 4 | 4 | 4 | 4 | 1 | 3 | 4 ～ 8 | 6 | 4 ～ 8 | 6 ～ 8 | 1 | 1 | 4 | 6 | 4 | 4 | 6 | 2 | 2 | 6 | 4 | 2 |
| Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | TiAlN | For General Steel (AlCrN etc.) |
| Link Diameter (d)(mm) | 4 ～ 32 | 4 ～ 12 | 6 ～ 20 | 10 ～ 12 | 8 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 32 | 4 ～ 20 | 4 ～ 16 | 4 ～ 20 | 4 ～ 20 | 3 ～ 32 | 6 ～ 16 | 6 ～ 12 | 4 ～ 10 | 8 ～ 10 | 6 ～ 16 | 6 ～ 12 | 7 ～ 11 | 6 ～ 20 | 6 | 6 ～ 12 | 6 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 4 | 4 | 6 | 6 ～ 12 | 6 | 4 | 4 | 4 ～ 6 | 4 ～ 6 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 |
| Overall Length (L)(mm) | 40 ～ 125 | 40 ～ 75 | 50 ～ 100 | 70 ～ 75 | 130 ～ 160 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 70 ～ 155 | 40 ～ 100 | 40 ～ 100 | 50 ～ 175 | 40 ～ 100 | 40 ～ 90 | 40 ～ 100 | 40 ～ 100 | 40 ～ 125 | 50 ～ 100 | 50 ～ 75 | 40 ～ 70 | 70 ～ 80 | 50 ～ 100 | 50 ～ 75 | 100 ～ 110 | 60 ～ 125 | 60 | 50 ～ 75 | 50 | 60 ～ 140 | 50 ～ 120 | 80 ～ 200 | 70 ～ 165 | 50 | 50 | 60 | 60 ～ 90 | 60 | 53 | 49 ～ 53 | 45 ～ 50 | 45 ～ 60 | 60 ～ 80 | 45 ～ 80 | 45 ～ 75 |
| Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12 ～ 24 | - | - | - | - | - | 0.5 ～ 5 | - | - | - | - | 0.2 ～ 0.5 | 0.4 ～ 5 | - | - | - | - | - |
| Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting |
| Flute Shape | Sharp Corner | With Lead | With Lead | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | Sharp Corner | With Lead | Sharp Corner | With Lead | Sharp Corner | With Lead | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Ultra-Small R | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner |
| Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Without Torsion | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Without Torsion | Without Torsion | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Flute Diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Work Material
-
Flute Length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.4
- 26.5
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.5
- 27.6
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
63
-
64
-
65
-
67
-
70
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
120
-
130
-
150
-
200
-
-
Number of Flutes(sheet)
-
Model
- Square
- Roughing
- Long Neck Square
- Highly-Helical
-
Coating
-
Link Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
-
Flute Shape
-
Helix Angle (θ)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- OSG (20)
- Nachi-Fujikoshi (13)
- NS TOOL (11)
- 7 LEADERS (1)
- Poulten&Graf (1)
- S&K (1)
- PROCHI (0)
- ATOM (0)
- VAN HOORN (0)
- OKAZAKI (0)
- TAIYO TOOL (0)
- GUHRING (0)
- ASAHI TOOLS (0)
- KYOWASEIKO (0)
- DIJET (0)
- GCT (0)
- EIKOSHA (0)
- KYOCERA (0)
- UNION TOOL (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy