(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Square End Mills (Carbide)（Work Material：Heat-Treated Steel Page2）
| Days to Ship |
|
|---|
-
Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
Excellent in general versatility, it is a 2D blade length type that can be used in a wide range of applications
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model
MISUMI
The 2D blade length type with high versatility achieves high-precision processing including grooving
- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model
MISUMI
Achieves both high levels of machining precision and reduction of processing time in side milling
- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral/Short Model
MISUMI
An end mill for titanium machining that performs medium roughing and finish machining at the same time
- Volume Discount
- TS
- Titanium
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
Stub blade length items that are ideal for grooving are available at incredibly low prices [C-Value]
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine blade length is available at attractive low prices[C-Value]
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model
MISUMI
A long blade length type that is compatible with deep engraving [C-Value]
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
XAL Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Days to Ship: 8 Days or more -
XAL Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model
MISUMI
Popular sizes compatible with deeper side milling are available in XAL Series [C-Value]
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Days to Ship: 8 Days or more -
Carbide Blade Neck Relief End Mill, 2-Flute/Short Model
MISUMI
Blade relief type is unaffected by interference from tools
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
Carbide Blade Neck Relief End Mill, 2-Flute/Regular Model
MISUMI
Blade relief type is unaffected by interference from tools
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
Non-Coated TS Coated Carbide 0.1mm Unit Corner C Designated End Mill
MISUMI
Corner C can be specified in 0.1 mm increments (coating may be supported)
- Non-Coated
- General Steel
Days to Ship: 10 Days or more -
Carbide Blade Neck Relief End Mill, 4-Flute/Short Model
MISUMI
Blade relief type with a 4-flute structure
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
Carbide Blade Neck Relief End Mill, 4-Flute/Regular Model
MISUMI
Blade relief type with a 4-flute structure
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
Carbide Square End Mill, 2-Flute/0.01mm Designation Model
MISUMI
Blade diameter can be selected from extensive lineup of flute lengths in 0.01 mm increments
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Days to Ship: 9 Days or more -
TSC Series Carbide Uneven Lead 4-Flute Square End Mill
MISUMI
Introducing a new addition to the TSC series: the long-awaited unequal lead 4-flute square end mill (helix angle 40° / 43°)
- Volume Discount
Days to Ship: 8 Days or more -
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Spec Expansion
- Price Reduction
Days to Ship: 8 Days or more -
VAC Series Carbide 2-Flute Square End Mill
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General purpose blade length regular type 2-flute
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Spec Expansion
- Price Reduction
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing. Cutting edge has a sharp corner.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 2D GSX2C-2D
Nachi-Fujikoshi
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]
· Blade Shape: With Lead
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
GSX MILL 4-Flute Blade 3D GSX4C-3D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Nachi-Fujikoshi
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Nachi-Fujikoshi
Capable of high-efficient machining of hardened materials. Suitable for wide side finishing.
- Volume Discount
Days to Ship: 8 Days or more -
X's Mill Geo Long Shank 4GEOLS
Nachi-Fujikoshi
High precision machining is possible even for deep engraving.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Mini Square End Mill with 2 Flutes 2MNE
Nachi-Fujikoshi
Carbide solid type small diameter end mill. Suitable for grooving precision molds and precision components.
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Mini Square End Mill with 4 Flutes 4MNE
Nachi-Fujikoshi
Carbide solid type small diameter end mill. Suitable for side-wall machining precision molds and precision components.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 3D GSX2C-3D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 2-Flute Blade 4D GSX2C-4D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 2D GSX4C-2D
Nachi-Fujikoshi
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 4D GSX4C-4D
Nachi-Fujikoshi
Supports wet processing of raw materials through dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 3-Flute Blade 2D GSX3C-2D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL Slot 1.5D GSXSLT-1.5D
Nachi-Fujikoshi
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL 4-Flute Blade 1D GSX4C-1D
Nachi-Fujikoshi
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Supports a wide range of materials from raw materials to hardened materials. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Work Material |
| Flute Length (ℓ)(mm) |
| Number of Flutes(sheet) |
| Model |
| Coating |
| Link Diameter (d)(mm) |
| Overall Length (L)(mm) |
| Length Under Neck (ℓ1)(mm) |
| Processing Applications |
| Flute Shape |
| Helix Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi |
| Product Series | Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model | TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral/Short Model | XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model | XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model | XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model | XAL Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model | Non-Coated TS Coated Carbide 0.1mm Unit Corner C Designated End Mill | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | |||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||
| Flute Diameter (D)(φ) | 0.2 ～ 12 | 0.2 ～ 12 | 1 ～ 20 | 1 ～ 12 | 6 ～ 20 | 0.5 ～ 20 | 1 ～ 12 | 0.5 ～ 12 | 1.5 ～ 16 | 1 ～ 12 | 6 ～ 12 | 6 ～ 12 | 2 ～ 20 | 6 ～ 12 | 6 ～ 12 | 3.15 ～ 19.99 | 2 ～ 25 | 1 ～ 20 | 0.3 ～ 20 | 1 ～ 20 | 1 ～ 18 | 0.2 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 6 ～ 20 | 3 ～ 20 | 0.2 ～ 20 | 1 ～ 20 | 0.1 ～ 2 | 1 ～ 2 | 3 ～ 16 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 2 ～ 32 | 3 ～ 20 | 1 ～ 20 | 1 ～ 16 | 1 ～ 20 | 2 ～ 25 |
| Work Material | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[○/◎] | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[○] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[○] | Heat-Treated Steel[○] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] |
| Flute Length (ℓ)(mm) | 0.4 ～ 24 | 0.6 ～ 36 | 2 ～ 40 | 4 ～ 48 | 14 ～ 42 | 0.75 ～ 30 | 2.5 ～ 30 | 2 ～ 48 | 3.75 ～ 40 | 4 ～ 48 | - | - | 3 ～ 60 | - | - | 3.5 ～ 48 | 4 ～ 50 | 4 ～ 80 | 0.6 ～ 45 | 3 ～ 38 | 2.5 ～ 32 | 0.5 ～ 50 | 2.5 ～ 50 | 2 ～ 40 | 1.5 ～ 30 | 2.5 ～ 50 | 3 ～ 60 | 7.5 ～ 50 | 25 ～ 75 | 4.5 ～ 30 | 0.4 ～ 38 | 1.5 ～ 30 | 0.2 ～ 6 | 3 ～ 6 | 8 ～ 32 | 3 ～ 60 | 4 ～ 80 | 2 ～ 40 | 4 ～ 80 | 6 ～ 70 | 18 ～ 75 | 2.5 ～ 40 | 1.5 ～ 24 | 1 ～ 20 | 6 ～ 45 |
| Number of Flutes(sheet) | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 ～ 4 | 4 | 4 | 2 | 4 | 2 | 2 | 4 ～ 8 | 4 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 6 ～ 8 | 4 | 2 | 4 | 2 | 4 | 3 | 2 | 2 | 4 | 4 | 4 | 4 | 3 | 3 | 4 | 4 |
| Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) / Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | - | - | TiAlN | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | For General Steel (AlCrN etc.) | TiAlN | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | - | - | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN |
| Link Diameter (d)(mm) | 3 ～ 12 | 3 ～ 12 | 4 ～ 20 | 4 ～ 12 | 6 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 16 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 4 ～ 20 | 6 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 4 ～ 20 | 3 ～ 4 | 4 | 6 ～ 16 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 32 | 6 ～ 20 | 4 ～ 20 | 4 ～ 16 | 4 ～ 20 | 4 ～ 25 |
| Overall Length (L)(mm) | 35 ～ 75 | 40 ～ 85 | 40 ～ 110 | 45 ～ 100 | 60 ～ 120 | 40 ～ 110 | 45 ～ 85 | 45 ～ 100 | 45 ～ 105 | 45 ～ 100 | 45 ～ 75 | 60 ～ 85 | 40 ～ 130 | 45 ～ 75 | 60 ～ 85 | 40 ～ 105 | 50 ～ 120 | 60 ～ 200 | 40 ～ 100 | 50 ～ 100 | 38 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 120 | 45 ～ 100 | 70 ～ 155 | 60 ～ 200 | 38 ～ 100 | 40 ～ 100 | 40 | 40 | 50 ～ 115 | 40 ～ 120 | 40 ～ 140 | 40 ～ 100 | 40 ～ 140 | 50 ～ 175 | 60 ～ 155 | 40 ～ 100 | 40 ～ 90 | 40 ～ 100 | 40 ～ 120 |
| Length Under Neck (ℓ1)(mm) | 17 ～ 45 | 23 ～ 55 | 17 ～ 73 | 29 ～ 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12 ～ 82 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting |
| Flute Shape | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | C Surface | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner / With Lead | With Lead | - | - | With Lead | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | With Lead | Sharp Corner | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner |
| Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Uneven Lead | - | - | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Flute Diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Work Material
-
Flute Length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.4
- 26.5
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.5
- 27.6
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
63
-
64
-
65
-
67
-
70
-
75
-
80
-
83
-
85
-
90
-
100
-
103
-
110
-
120
-
130
-
150
-
200
[4-60/1mm Unit(s)]
-
-
Number of Flutes(sheet)
-
Model
- Square
- Roughing
- Long Neck Square
- Highly-Helical
-
Coating
-
Link Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
-
Flute Shape
-
Helix Angle (θ)
Narrow search by specifying Manufacturer
-
- NS TOOL (57)
- OSG (39)
- Nachi-Fujikoshi (34)
- KYOCERA (15)
- OKAZAKI (13)
- ASAHI TOOLS (12)
- KYOWASEIKO (8)
- ATOM (5)
- S&K (4)
- DIJET (3)
- 7 LEADERS (2)
- GCT (2)
- Poulten&Graf (2)
- UNION TOOL (2)
- PROCHI (1)
- VAN HOORN (0)
- TAIYO TOOL (0)
- GUHRING (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy