(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Digital Bend Meter (Part Numbers)

Digital Bend Meter
  • Volume Discount

•Product Model: Digital Goniometer
•Measurement Range: 0 ~ 360°
•Minimum Display (°): 0.1
•Beam Model: No Beam
•Dimension (mm): 57L×57H×29W

PDF

Part Number

Configured Part Number is shown.

DPM-2

 
Part Number
DPM-2
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s)Available

9 Days or more

Loading...

  1. 1

Basic Information

Product Model Digital Angle Meter Measurement range 0~360° Minimum Display(°) 0.1
Beam Model Without Pole Dimensions(mm) 57L×57H×29W Measurement range details Bending angle mode: 180° X 2α (360°) / General angle mode: 90° X 4 (360°)
Material Aluminum, Alloy Plated Finish Mass(g) 220 Dust-Proof, Waterproof Standard IP50
Measurement Accuracy (Repeatability) Bending angle mode: 0° to 5° / 175° to 180°= ±0.2° (±12' or 3.5 mm/m), 6° to 174° = ±0.4° (±24' or 7 mm/m), General angle mode: 0° to 5° & 85° to 90° = ±0.1° (±6' or 1.75 mm/m), 6° to 84° = ±0.2° (±12' or 3.5 mm/m) Operating Temperature 0℃~40℃ Battery used 9 V 6P square alkaline battery X 1
Battery life 70 h (continuous use) Measuring Surface Magnet Neodymium Magnet φ10, Adsorption Power 2 kg x 3 Automatic Switching Off After Approx. 5 Minutes
Traceability Calibration certificate can be issued (for fee)

Please check the type/dimensions/specifications of the part DPM-2 in the Digital Bend Meter series.

Additional Products in this Category

Tech Support