(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

For Rib Grooves, Taper End Type FXS-RB-TPE (FXS-RB-TPE-0.5X1X2)

For Rib Grooves, Taper End Type FXS-RB-TPE FXS-RB-TPE-0.5X1X2
  • Volume Discount

A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for processing side surfaces.

PDF

Part Number

Configured Part Number is shown.

FXS-RB-TPE-0.5X1X2

 
Part Number
FXS-RB-TPE-0.5X1X2
Part NumberMinimum order quantityVolume DiscountDays to Ship Single Angle (θ)
(Degree)
Tip Diameter (D)
(φ)
Flute Length (l)
(mm)
Link Diameter (d)
(mm)
Overall Length (L)
(mm)
Large End Diameter
(mm)
Tool No.
1 Piece(s)Available

8 Days or more

10.523350.578507494

Loading...

  1. 1

Basic Information

Model Tapered square Work Material General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / Stainless Steel / Cast Iron / Titanium / Copper Number of Flutes(sheet) multi-edged
Coating TiAlN Torsional Angle Weak torsion (15 to 25°)

Please check the type/dimensions/specifications of the part FXS-RB-TPE-0.5X1X2 in the For Rib Grooves, Taper End Type FXS-RB-TPE series.

Products like this...

Part Number
FXS-RB-TPE-0.4X0.75X2
FXS-RB-TPE-0.4X0.75X3
FXS-RB-TPE-0.4X0.75X4
FXS-RB-TPE-0.5X1X4
FXS-RB-TPE-0.5X1X6
FXS-RB-TPE-0.5X2X4
Part NumberMinimum order quantityVolume DiscountDays to Ship Single Angle (θ)
(Degree)
Tip Diameter (D)
(φ)
Flute Length (l)
(mm)
Link Diameter (d)
(mm)
Overall Length (L)
(mm)
Large End Diameter
(mm)
Tool No.
1 Piece(s)Available

8 Days or more

0.750.423350.458505691
1 Piece(s)Available

8 Days or more

0.750.433350.488505692
1 Piece(s)Available

8 Days or more

0.750.443350.58505693
1 Piece(s)Available

8 Days or more

10.543350.648507495
1 Piece(s)Available

8 Days or more

10.563350.718507496
1 Piece(s)Available

8 Days or more

20.543350.788507935

Additional Products in this Category

Tech Support