(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CA2K Series
- Volume Discount
[Features]
· Weight has been reduced by up to 15% by changing the shape of the rod cover and head cover
· Easy air cushion control
· Various switches such as compact auto switches and strong magnetic field resistant switches can be mounted
· With auto switch (CDA2K)
(i)Caution
- See catalog for specification details.
- Product pictures are representations. CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
Model Number Notation
Model Number Notation
Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod, CA2K Series Specifications
CA2K Series external appearance
CA2K Series (air cushion) JIS symbol
| Tube Inner Diameter (mm) | 40 | 50 | 63 |
|---|---|---|---|
| Applicable Fluids | Air | ||
| Proof Pressure | 1.5 MPa | ||
| Maximum Operating Pressure | 1.0 MPa | ||
| Minimum Operating Pressure | 0.05 MPa | ||
| Ambient Temperature and Operating Fluid Temperature | Without auto switch: -10°C to 70°C, with auto switch: -10°C to 60°C* | ||
| Piston Speed | 50 to 500 mm/s | ||
| Cushion | Air cushion | ||
| Stroke Length Tolerance | Up to 250st: (0 to +1.0), 251 to 600st: (0 to +1.4) | ||
| Rod Non-rotating Accuracy | ±0.8° | ||
| Allowable Rotational Torque | 0.44N·m or Less | ||
| Lubrication | Not required (non-lubricated) | ||
| Mounting Support Type | Basic type, axial foot type, rod-end flange type, head-end flange type, single clevis type, double clevis type, center trunnion type | ||
- * No freezing.
Weights
(Unit: kg)
| Tube Inner Diameter (mm) | 40 | 50 | 63 | |
|---|---|---|---|---|
| Basic Weight | Basic Type | 0.88 | 1.32 | 1.91 |
| Axial Foot Type | 1.07 | 1.54 | 2.25 | |
| Flange Type | 1.25 | 1.77 | 2.70 | |
| Single Clevis Type | 1.11 | 1.66 | 2.54 | |
| Double Clevis Type | 1.15 | 1.75 | 2.70 | |
| Trunnion Type | 1.24 | 1.80 | 2.71 | |
| Additional Weight Per 50 Strokes | 0.20 | 0.25 | 0.30 | |
| Accessories | Single Knuckle Joint | 0.23 | 0.26 | 0.26 |
| Double Knuckle Joint (With Pin) | 0.37 | 0.43 | 0.43 | |
Calculation method
E.g. CA2KL40-100
- Basic weight: 1.07 (axial footø40 [40-mm tube inner diameter])
- Additional weight: 0.20 / 50 stroke
- Cylinder stroke: 100 stroke
1.07 + 0.20 × 100/50 = 1.47 kg
Bellows Material
- Bellows material (J): nylon tarpaulin, maximum ambient temperature 70°C
- Bellows material (K): heat-resistant tarpaulin, maximum ambient temperature 110°C*
- * Maximum ambient temperature for the bellows unit.
Structural Drawing
CA2K Series structural drawing
| Number | Name | Material | Notes |
|---|---|---|---|
| 1 | Rod cover | Aluminum alloy | Metallic coating |
| 2 | Head cover | Die-cast aluminum | Metallic coating |
| 3 | Cylinder tube | Aluminum alloy | Hard anodized aluminum |
| 4 | Piston rod | Carbon steel | Hard chrome plating |
| 5 | Piston | Aluminum alloy | Chromate |
| 6 | Cushion ring A | Rolled steel | Zinc chromate |
| 7 | Cushion ring B | Rolled steel | Zinc chromate |
| 8 | Non-rotating guide | Oil-impregnated sintered alloy | - |
| 9 | Cushion valve | Steel wire | Zinc trivalent chromate |
| 10 | Tie-rod | Carbon steel | Zinc trivalent chromate |
| 11 | Spring washer | Steel wire | Zinc trivalent chromate |
| 12 | Piston nut | Rolled steel | Zinc trivalent chromate |
| 13 | Retaining ring | Spring steel | Phosphate coated |
| 14 | Spring washer | Steel wire | Zinc trivalent chromate |
| 15 | Tie-rod nut | Rolled steel | Zinc trivalent chromate |
| 16 | Wear ring | Resin | - |
| 17 | Cushion packing holder | Aluminum alloy | - |
| 18 | Cushion seal | Urethane | - |
| 19 | Rod packing | NBR | - |
| 20 | Piston packing | NBR | - |
| 21 | Cushion valve seal | NBR | - |
| 22 | Cylinder tube gasket | NBR | - |
| 23 | Piston gasket | NBR | O-ring |
| 24 | Rod end nut | Rolled steel | Zinc trivalent chromate |
- * Do not disassemble the trunnion type. See the catalog for details.
Drawing
(Unit: mm)
Basic type CA2KB dimensional drawing
(Unit: mm)
| Tube Inner Diameter (mm) | Stroke Range (mm) | A | AL | B | B1 | C | D | E | F | G | H1 | J | KA | M | MM | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Without Bellows | With Bellows | |||||||||||||||
| 40 | to 500 | 20 to 500 | 30 | 27 | 60 | 22 | 44 | 16 | 32 | 10 | 15 | 8 | M8 × 1.25 | 14 | 11 | M14 × 1.5 |
| 50 | to 600 | 20 to 600 | 35 | 32 | 70 | 27 | 52 | 20 | 40 | 10 | 17 | 11 | M8 × 1.25 | 18 | 11 | M18 × 1.5 |
| 63 | to 600 | 20 to 600 | 35 | 32 | 85 | 27 | 64 | 20 | 40 | 10 | 17 | 11 | M10 × 1.25 | 18 | 14 | M18 × 1.5 |
(Unit: mm)
| Tube Inner Diameter (mm) | N | P | S | Without Bellows | With Bellows | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| H | ZZ | d | e | f | h | L | ZZ | ||||
| 40 | 27 | 1/4 | 84 | 51 | 146 | 56 | 43 | 11.2 | 59 | 1/4 stroke | 154 |
| 50 | 30 | 3/8 | 90 | 58 | 159 | 64 | 52 | 11.2 | 66 | 1/4 stroke | 167 |
| 63 | 31 | 3/8 | 98 | 58 | 170 | 64 | 52 | 11.2 | 66 | 1/4 stroke | 178 |
- * The external dimensions for each mounting type and the dimensions of accessories (options) are the same as the standard type double acting single rod model. Refer to the manufacturer's catalog.
Notes
Minimum Stroke for Auto Switch Mounting
- * The minimum stroke for mounting varies with the auto switch type and cylinder mounting type. In particular, the center trunnion type requires careful attention. (Refer to the catalog for details.)
Precautions for Use
- *Avoid applying rotational torque to the piston rod. The non-rotating guide may become deformed, compromising the accuracy. Also, when screwing the nut onto the thread of the piston rod end, ensure the piston rod is fully retracted and use a wrench flat on the part protruding from the parallel part of the rod.
At this time, be careful not to apply tightening torque to the non-rotating guide.
Correct mounting diagram
Incorrect mounting diagram
Disassembly/Replacement
- * Contact the SMC support center when exchanging the rod packing. Air leaks may occur according to the position in which the rod packing is incorporated, so contact the SMC support center when exchanging the rod packing.
Do not exchange the non-rotating guide. The non-rotating guide is press-fitted, so use a cover assembly when exchanging.
Other
- * Before using, please refer to the "Safety Precautions," the "Actuator Precautions," and the "Auto Switch Precautions."
- * Product images are representative models.
- * Refer to the manufacturer's catalog for information not detailed above.
■ Made-to-order specifications: For details regarding a change to the trunnion bracket mounting location, please see below.
Loading...
Basic Information
| Rod Operation Method | Single Rods | Cylinder Operation Method | Double Acting | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | With rod detent function | Environment, Applications | Standard |
Specification/Dimensions
-
Cylinder (Tube) Inner Diameter(φ)
-
Stroke(mm)
-
Cushion
-
Operating Pressure(MPa)
-
Specifications
-
Port thread type
- Rc
-
Auto Switches
-
Lead Wire Length(m)
- 0.5
- 3
- 5
- N/A
-
The number of the switches
-
Type of Auto Switch Mounting
- N/A
-
Type of Mount Support
- 0
- Axial foot type
- Basic type
- Head-end flange
- Rod-end flange type
- U-Shaped Clevis Type
-
Bellows
-
Custom-made Specifications
- Adjustable stroke cylinder / Adjustable extension type
- None
-
type
- CA2K
- CDA2K
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Air Cylinder, Standard Type, Lube / Non-Lube Type, Air-Hydro Type CS1 Series
- CG1W Series Standard Type Double Acting, Double Rod Air Cylinder
- Air Cylinder, Non-Rotating Rod Type: Single Acting, Spring Return/Extend CM2K Series
- Air Cylinder, Standard Type: Single Acting, Spring Return/Extend CJ2 Series
- Air Cylinder, Direct Mount Type: Double Acting, Single Rod CJ2R Series
- Air Cylinder, Direct Mount, Non-Rotating Rod Type: Double Acting, Single Rod CJ2RK Series
- CA2W Series Air Cylinder, Standard Type: Double Acting, Double Rod (Standard / Heat Resistant)
- Air Cylinder With Improved Water Resistance, Standard Type, Double Acting, Single Rod CG1 Series
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy